checking oil KIA CEED 2018 Owners Manual
[x] Cancel search | Manufacturer: KIA, Model Year: 2018, Model line: CEED, Model: KIA CEED 2018Pages: 10, PDF Size: 2.37 MB
Page 10 of 10
The Kia Service App
Engine Oil / Washer Fluid / Additional Info
The Kia Service App – now available for
free on iPhone/iPad and Android
With the Kia Service, you have (almost)
all Kia dealers in Europe within reach*.
Looking for a showroom or just a service,
the app displays all dealers around your
current location on the map. With one click
you can call a dealer, visit their website or
get directions to the showroom. Great for
travel at home or abroad.
(*) In selected markets only
Additional Information
Engine Oil / Washer Fluid / Additional Info
Checking the engine oil level [7]
Warm up the engine to
operating temperature and
switch off. On level ground pull
the dipstick out and wipe clean
before re inserting it fully. Pull
the dipstick out again and check
the level. It should be between
F and L.Refilling engine oil [7]
Use only the specified engine
oil [8] and refill using a funnel
to avoid spillage on engine
components.
Checking the washer fluid
level [7]
Check the fluid level and add
fluid if necessary.
The Kia 7 year warranty 7-year/100,000 Mile
new car warranty. Valid in all EU member states (plus Norway,
Switzerland, Iceland and Gibraltar), subject to local terms
and conditions.
Copyright © 2017 Kia Motors Europe GmbH, all rights reserved.
17.000622 - QRGJDPE - ENG RHD - UK
Hill-Start Assist Control (HAC)
This is designed to assist with hill
starts by preventing the car rolling
backwards when driving off. The system
maintains the braking pressure in certain
circumstances for 2 seconds enabling to
pull away when you are ready.
Parking brake (handbrake)
When engaging the parking brake, apply
the footbrake first and keep it depressed.
Then ensure the parking brake is properly
applied according to the type. Hand type:
pull the parking brake lever up as far as
possible. Foot type: depress the parking
brake pedal down as far as possible.
Electric (EPB) type: pull up the EPB switch
and make sure the warning light comes on.
We strongly recommend to leave the car
in first or reverse gear or in the ‘P’ (Park)
position on automatics when leaving the car.
Bluetooth®
Many of our cars have Bluetooth®
connectivity to enable the driver to safely
enjoy the convenience of the mobile
phone. For Bluetooth
® compatibility please
visit the owners section on our website.
Idle Stop & Go (ISG)
When enabled, ISG automatically stops the
car’s engine to reduce fuel consumption
and emissions. The ISG function may not
work if the car’s battery charge status,
ambient temperature and/or engine
temperature is too low. Air conditioning/
heater control settings may also affect
ISG function.
Starting your vehicle with the parking
brake applied:
•
For Manual Transaxle vehicles: Make sure
the transaxle is in Neutral and the clutch
pedal is fully depressed before starting
the vehicle.
• For Automatic Transaxle vehicles: Make
sure the transaxle is in the P (Park)
position and the brake pedal fully
depressed before starting the vehicle.
For full details and instructions on any
item contained in this quick reference
guide, please read the owner’s manual.