height KIA K5 2021 Features and Functions Guide

44*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVERK5 FEATURES & FUNCTIONS GUIDE
6-Way Manual Adjustable Driver’s Seat*†1 6
Pull lever A to slide Seat forward/backward.
Pull lever B up several times to raise Seat Height. Push lever B down several times to lower Seat Height.
Pull lever C to adjust Seatback recline.
Press D to adjust Lumbar support.

When adjusting seat forward or backward, ensure seat clicks or locks into place before driving vehicle.
QUICK TIP
Do not attempt to adjust the seat while the vehicle is moving. This could result in loss of control of the vehicle.
For illustrative purposes only. Your actual display, buttons and/or features may vary.
Refer to section 3 in the Owner’s Manual for more information.
Front Seat Headrest Adjustment†9
To raise headrest: Pull headrest up to the desired position.
To lower headrest: Press lock E, then press the headrest down.
REMINDERS:
• Button may be hard to see if headrest is in its lowest position
• Do not operate the vehicle with the headrests removed. Headrests can provide critical neck and head support in an accident
AB
C
D
E
Refer to section 3 in the Owner’s Manual for more information.
SEATING
SEATING
Check rear seats
: Alarm OffOK
Rear Occupant Alert (ROA) with Door Monitoring
The Rear Occupant Alert (ROA) with Door Monitoring can help alert the driver when
a rear passenger may be left in the vehicle. The alert will be a message on the
Instrument Cluster stating to “Check rear seats” F and a chime will sound.
The factory default is set to OFF. To turn the system ON or OFF, go to User Settings
in the Instrument cluster or Vehicle Settings*, on the audio head unit select
Convenience, then Rear Occupant Alert and check /uncheck the box.
REMINDER: Always be sure to check the passenger areas before leaving the vehicle.
ROA is not a substitute for one’s attention. Always check the vehicle’s interior before exiting.
See section 4 in the Owner’s Manual for more information.
Image is for illustrative purposes only and may not reflect actual feature or operation.
F