remote control KIA Magnetis 2006 2.G Owner's Manual

KNOWING YOUR VEHICLE
3-58If the fuel filler lid will not open in cold
weather because the area around it is
frozen, push or lightly tap the lid.
STEERING WHEELHORNTo sound the horn, press the horn
symbol on your steering wheel.
MIRRORSOUTSIDE REARVIEW
MIRRORYour vehicle is equipped with both left-
hand and right-hand outside rearview
mirrors. The mirrors can either be
adjusted remotely with the control levers
or remote switch, depending on the type
your vehicle has. The mirror heads can
be folded rearward to prevent damage
when using an automatic car wash or
passing another vehicle in a narrow
street.
R
E
S
A
C
C
E
L
C
A
N
C
E
L
C
O
A
S
T
S
E
T
MMSA3050
CAUTION
• The right outside rearview
mirror is convex. Objects seen in
the mirror are closer than they
appear.
• When changing lanes, use your
interior rearview mirror or
direct observation to determine
the actual distance of following
vehicles behind you.
✻
NOTICE
Do not spill fuel on the exterior
surfaces of the vehicle. Any type of
fuel on painted surfaces may
damage the paint and creates a fire
hazard.
MS-CNA-Eng 3.QXD 7/25/2005 5:17 PM Page 58

3-59
ELECTRIC REMOTE
CONTROLThis switch, located on the armrest of the
driver’s door, controls the adjustments for
both right and left outside mirrors. To
adjust the position of either mirror:
1. Move the selector switch to the right
or left to activate the adjusting
mechanism for the corresponding
mirror.
2. Adjust the mirror angle by depressing
the mirror adjustment control switch
in the desired direction.
MMSA3052
✻
NOTICE
Do not scrape ice off the mirror
face; this may damage the surface
of the glass. If ice should restrict
movement of the mirror, do not
force the mirror to adjust it.
To remove ice, use a de-icer spray,
or a sponge or soft cloth with very
warm water.
✻
NOTICE
The mirrors stop moving when
they reach the maximum adjusting
angles, but the motor continues to
operate while the switch is
depressed. Do not depress the
switch longer than necessary or the
motor may be damaged.
MS-CNA-Eng 3.QXD 7/25/2005 5:17 PM Page 59