sensor KIA OPTIMA 2019 Features and Functions Guide

OPTIMA FEATURES & FUNCTIONS GUIDE10*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Blind-Spot Collision Warning w/ RCCW Video
To view a video on your mobile device, snap this QR Code or visit the listed website .
Refer to page 2 for more information .
www.youtube.com/KiaFeatureVideos
A
B
D
QR CODE
(Located left of Steering Wheel)
Blind-Spot Collision Warning (BCW) w/ RCCW*†6
The BCW system uses radar sensors in the rear bumper to monitor and warn the driver
if it detects an approaching vehicle in the driver’s blind spot area and before changing
lanes . The light on the BCW button A will illuminate when turned ON . The
outside rearview mirror warning lights will also illuminate for 3 seconds .
The system will become active when the vehicle is traveling faster than approximately
18 mph and will alert the driver if another vehicle is detected by the radar sensor .
Blind-Spot Collision Warning (BCW) / Lane Change Assist (LCA)*
1st-stage alert: When another vehicle is detected within the BCW System boundary B
, or when a vehicle is detected within the LCA boundary C approaches at a high speed,
a yellow indicator will illuminate on the outside rearview mirrors C .
2nd-stage alert: When 1st-stage alert is on and the driver activates a turn
signal, a flashing yellow indicator will illuminate on the outside rearview mirrors
and the system will sound an alert .
Rear Cross-Traffic Collision Warning (RCCW)*†6
If the RCCW system sensors detect approaching vehicles from the left or right
side D, the system will sound an alert, the warning indicators on the outside
rearview mirror will illuminate and a message will appear on the LCD screen,
when these conditions are met:
•The shift is moved into (R) Reverse
•The vehicle is moving slower than 6 mph
REMINDERS:
•The RCCW feature can be turned OFF/ON in User Settings
•
The RCCW system will show a warning if the approaching vehicle speed is between 2 .5 - 22 mph within sensing range . See Owner's Manual for other conditions
•When vehicle power is cycled, the RCCW will remain in the previous state
For more information on the Blind-Spot Collision Warning, please refer to the Owner’s Manual.
The above images are for illustration purposes only and may not reflect actual operation.
The BCW and RCCW systems are supplemental systems. Do not solely rely on these systems and always pay attention to drive safely.
C
DRIVER'S PANEL

OPTIMA FEATURES & FUNCTIONS GUIDE12*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Lane Keeping Assist (LKA) Video
To view a video on your mobile device, snap this QR Code or visit the listed website . Refer to page 2 for more information .
www.youtube.com/KiaFeatureVideos
QR CODE
A
(Located left of Steering Wheel)
Lane Keeping AssistLane Keeping Assist
Lane Keeping AssistLane Keeping Assist
Lane Keeping AssistLane Keeping Assist
Lane Keeping AssistLane Keeping Assist
When the LK A sensor detects the lane traveling inWhen the LK A sensor does not detect the lane traveling inWhen the LK A sensor detects the vehicle veering outside of the lane traveling in, a yellow indicator will illuminate
Lane Keeping Assist (LKA)*†6
With the Engine Start /Stop button in the ON position, press the LK A button A to turn system ON . The instrument cluster
indicator will illuminate green .
If the LK A detects that you are moving outside of your lane, the system may issue a warning on the LCD screen and an alert
may sound, while applying a slight adjustment to the steering, trying to prevent the vehicle from moving outside its lane .
Standard LK A is the operating mode by default when the button is depressed to ON . To
switch to between modes (Standard LK A, Active LK A and Lane Departure), go to User
Settings in the Instrument Cluster .
All systems will operate under the following conditions:
•The vehicle speed exceeds approximately 37 mph
•The LK A system recognizes the lane the vehicle is traveling in
•The vehicle is between the lane markers
The Lane Keeping Assist (LKA) is not a substitute for safe and proper driving. Always drive safely and use caution. LKA may not always alert the driver if the vehicle is about to be driven outside of its lane.
REMINDERS:
• LK A will not issue a warning if the turn signal or hazard lights are activated
• If the LK A button is ON and ignition is cycled, the system will turn ON again . If the LK A button is OFF, the system remains OFF
DRIVER'S PANEL