Engine brake
The vehicle is being slowed by engine
compression. (Wheel
Engine)
Power reserve
Engine is both driving the vehicle and
charging the hybrid battery. (Engine
Wheel & Battery)
Engine generation/regeneration
The engine and regenerative braking
system charge the hybrid battery driv‐ ing deceleration. (Engine & Wheel
Battery)
Hybrid system overview
1-26
Engine generation/motor drive
The vehicle is being slowed by engine
compression and regenerative braking. The hybrid battery is being charged by
regenerative braking. (Engine
Battery Wheel)
Engine brake/regeneration
The engine compression can be used to
slow the vehicle. The regenerative braking system can be used to charge
the hybrid system. (Wheel
Engine & Battery)
1-27
1
Hybrid system overview
STARTING THE HYBRID/PLUG-IN HYBRID VEHICLE (SMART KEY)
Starting the hybrid system
1. Carry the smart key into the vehi‐cle.
2. Make sure the parking brake is firmly applied.
3. Place the shift lever in the P (Park) position.
In N (neutral) position, you cannot
start the vehicle.
4. Depress the brake pedal.
5. Press the engine start/stop button.
6. The engine should be started with‐ out pressing the accelerator. In ex‐
tremely cold weather or after the
vehicle has not been operated for several days, let the engine warm
up without depressing the acceler‐
ator. • Even if the smart key is in the ve‐ hicle, if it is far away from you, the engine may not start. • When the engine start/stop but‐
ton is in the ACC or ON position, if
any door is open, the system
checks for the smart key. If the
smart key is not in the vehicle,
the warning, "Key is not in vehi‐
cle" will come on, and if all doors
are closed, the chime will also
sound for about 5 seconds. The
indicator will turn off while the
vehicle is moving. Keep the smart
key in the vehicle when using the
ACC position or if the vehicle en‐
gine is on.
If the starting procedure is followed,the "READY" symbol on the instrumentcluster will turn on. For more details,please refer to L
NOTICE
When the hybrid system is in READY
mode, the engine will automatically
start and stop as needed. The
"READY" symbol will illuminate in the
cluster when the system is opera‐
tional.
1-29
1
Hybrid system overview