lumbar support KIA OPTIMA PLUG-IN HYBRID 2017 Owners Manual

SEATS
❈

5IF
BDUVBM
TIBQF
NBZ
EJGGFS
GSPN
UIF
JMMVTUSBUJPO
0+')-#
Driver’s seat
1. Forward and backward
2. Seatback angle
3. Seat cushion height4. Lumbar support *
5. Driver position memory system *
6. Headrest
Front passenger’s seat
7. Forward and backward
8. Seatback angle
9. Seat cushion height
10. Lumbar support *
11. Headrest
Rear seat
12. Armrest 13. Ski pass-through *
14. Headrest15. Seatback folding lever *
* : if equipped
Safety features of your vehicle
4-02

Lumbar support (if equipped)
The lumbar support can be adjusted by
pressing the lumbar support switch on the side of the Driver's seat. 1. Press the front portion of the switch to increase support, or the
rear portion of the switch, to de‐
crease support.
2. Release the switch once it reaches the desired position.
Front seat adjustment - power
(if equipped)
The front seat can be adjusted by usingthe control switches located on the
outside of the seat cushion. Before
driving, adjust the seat to the proper position so you can easily control the
steering wheel, pedals and switches on
the instrument panel.
WARNING
The power seat is operable with theengine start/stop button in OFF.Therefore, children should never beleft unattended in the vehicle.
CAUTION
•The power seat is driven by anelectric motor. Stop operating oncethe adjustment is completed. Ex‐cessive operation may damage theelectrical equipment.
(Continued)
(Continued)
•When in operation, the power seatconsumes a large amount of elec‐trical power. To prevent unneces‐sary charging system drain, don’tadjust the power seat longer thannecessary while the engine is notrunning.
•Do not operate two or more powerseat control switches at the sametime. Doing so may result in powerseat motor or electrical compo‐nent malfunction.
Safety features of your vehicle
4-06

Lumbar support (if equipped)
0+'-
The lumbar support can be adjusted by
pressing the lumbar support switch on the side of the seat. 1. Press the front portion (1) of the switch to increase support, or the
rear portion (2) of the switch, to
decrease support.
2. Release the switch once it reaches the desired position.
3. Press the upper portion (3) of the switch to move the support posi‐
tion up, or press the lower portion
(4) of the switch, to move the sup‐
port position down. 4. Release the switch once it reaches
the desired position.
Driver position memory system
(if equipped, for power seat)
0+'-
A driver position memory system is
provided to store and recall the driver seat and outside rearview mirror posi‐
tion with a simple button operation. By
saving the desired position into the system memory, different drivers can
reposition the driver seat based upon
their driving preference. If the battery is disconnected, the position memory
will be erased and the driving position
should be restored in the system.
WARNING
Never attempt to operate the driverposition memory system while thevehicle is moving.This could result in loss of control,and an accident causing death, seri‐ous injury, or property damage.
Storing positions into memory
using the buttons on the door
Storing driver's seat positions
1. Shift the shift lever into P (for Au‐ tomatic transaxle) while the engine
start/stop button is ON.
2. Adjust the driver’s seat and outside rearview mirror comfortable for
the driver.
3. Press SET button on the control panel. The system will beep once.
4. Press one of the memory buttons (1 or 2) within 5 seconds after
pressing the SET button. The sys‐ tem will beep twice when memory
has been successfully stored.
Safety features of your vehicle
4-08