headlight bulb KIA RIO HATCHBACK 2019 Owners Manual

Features of your vehicle
96
4
To flash the headlights, pull the lever
towards you. It will return to the normal
(low-beam) position when released.
The headlight switch does not need to
be on to use this flashing feature.
Turn signals and lane change
signals
The ignition switch must be on for the
turn signals to function. To turn on
the turn signals, move the lever up or
down (A). The green arrow indicators
on the instrument panel indicate
which turn signal is operating. They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change, move the
turn signal lever slightly and hold it in
position (B). The lever will return to
the OFF position when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned
out and will require replacement.
OSC047420N
OSC047406N
■ Type A
■ Type B
OSC047419N
OSC047405N
■ Type A
■ Type B
SC CAN (ENG) 4.QXP 7/18/2018 5:50 PM Page 96

497
Features of your vehicle
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
slightly and then release it. The lane
change signals will blink 3, 5 or 7
times.
You can choose one-touch lane
change blinking function in “One
touch turn signal” of “User setting”.
Refer to “User setting” in chapter 4.
(if equipped)
✽ ✽NOTICE
If an indicator flash is abnormally
quick or slow, the bulb may be
burned out or have a poor electrical
connection in the circuit.
Front fog light (if equipped)
Fog lights are used to provide
improved visibility when visibility is
poor due to fog, rain or snow, etc. The
fog lights will turn on when the fog light
switch (1) is turned to the on position
after the headlights are turned on. To turn off the fog lights, turn the
switch (1) to the off position.
When in operation, the fog lights
consume large amounts of vehicle
electrical power. Only use the fog
lights when visibility is poor.
OSC047421N
OSC047413N
■ Type A
■ Type B
SC CAN (ENG) 4.QXP 7/18/2018 5:50 PM Page 97

871
Maintenance
✽ ✽NOTICE
• If the light bulb or lamp connector
is removed while the lamp is still
on, the fuse box's electronic sys-
tem may log it as a malfunction.
Therefore, a lamp malfunction
incident may be recorded as a
Diagnostic Trouble Code (DTC) in
the fuse box.
• It is normal for an operating lamp to flicker momentarily. This is due
to a stabilization function of the
vehicle’s electronic control device.
If the lamp lights up normally
after momentarily blinking, then
it is functioning as normal.
However, if the lamp continues to
flicker several times or turns off
completely, there may be an error
in the vehicle’s electronic control
device. Please have the vehicle
checked by an authorized Kia
dealer immediately.
✽ ✽ NOTICE
We recommend that the headlight
aiming be adjusted after an accident
or after the headlight assembly is rein-
stalled at an authorized Kia dealer.
✽ ✽NOTICE
After driving in heavy rain or wash-
ing, headlamp and taillamp lenses
could appear frosty. This condition is
caused by the temperature differ-
ence between the lamp inside and
outside. This is similar to the con-
densation on your windows inside
your vehicle during the rain and
doesn’t indicate a problem with your
vehicle. If the water leaks into the
lamp bulb circuitry, we recommend
that you have the vehicle checked by
an authorized Kia dealer.
If you don’t have the necessary tools,
the correct bulbs and the expertise,
consult an authorized Kia dealer. In
many cases, it is difficult to replace
vehicle light bulbs because other
parts of the vehicle must be removed
before you can get to the bulb. This is
especially true if you have to remove
the headlamp assembly to get to the
bulb(s).
Removing/installing the headlamp
assembly can result in damage to
the vehicle.
If non-genuine parts or substandard
bulbs are used, it may lead to blow-
ing a fuse or other wiring damages.
Do not install extra lamps or LEDs to
the vehicle. If additional lights are
installed, it may lead to lamp mal-
functions and flickering. Additionally,
the fuse box and other writing may
be damaged.
SC CAN (ENG) 8.qxp 7/18/2018 5:34 PM Page 71

Index
6I
Front fog lamp bulb replacement................................8-80
Front turn signal lamp bulb replacement (Headlamp Type A) ..................................................8-77
Front turn signal lamp bulb replacement (Headlamp Type B) ..................................................8-79
Glove box lamp bulb replacement ............................8-97
Headlamp (Low/High beam) (Bulb type) bulb replacement (Headlamp Type A) ..............................8-75
Headlamp (Low/High beam) (Bulb type) bulb replacement (Headlamp Type B) ..............................8-78
Headlamp (Low/High beam) (LED type) bulb replacement (Headlamp Type B) ..............................8-79
High mounted stop lamp bulb replacement (for 4 door)................................................................8-94
High mounted stop lamp bulb replacement (for 5 door)................................................................8-89
License plate lamp bulb replacement ........................8-89
Light bulb position (front) ..........................................8-72
Light bulb position (rear) (4 door)..............................8-74
Light bulb position (rear) (5 door)..............................8-73
Light bulb position (side)............................................\
8-75
Map lamp bulb replacement ......................................8-95
Position lamp + DRL (LED type) bulb replacement..8-81
Rear turn signal lamp bulb replacement (for 4 door) ..8-90
Rear turn signal lamp bulb replacement (for 5 door) ..8-84
Room lamp bulb replacement ....................................8-97
Side marker (front) (Bulb type) bulb replacement (Headlamp Type A) ..................................................8-76 Side marker (front) (LED type) bulb replacement
(Headlamp Type B) ..................................................8-80
Side marker (rear) (Bulb type) bulb replacement (Rear combination lamp Type A) (for 5 door) ........8-87
Side marker (rear) (LED type) bulb replacement (Rear combination lamp Type B) (for 4 door) ........8-92
Side marker (rear) (LED type) bulb replacement (Rear combination lamp Type B) (for 5 door) ........8-88
Side repeater lamp (bulb type) bulb Replacement ....8-82
Side repeater lamp (LED type) bulb Replacement ....8-82
Stop and tail lamp (LED type) bulb replacement (for 4 door)................................................................8-94
Stop and tail lamp (LED type) bulb replacement (for 5 door)................................................................8-85
Stop and tail lamp / Side marker (Bulb type) replacement (for 4 door) ..........................................8-91
Stop and tail lamp bulb replacement (for 5 door) ......8-83
Tail lamp (Bulb type) bulb replacement (for 4 door) ..8-93
Tail lamp (inside) bulb replacement (for 5 door) ......8-86
Tailgate room lamp bulb replacement (for 5 door) ....8-98
Trunk lamp bulb replacement (for 4 door) ................8-95
Vanity mirror lamp bulb replacement ........................8-96
Lighting........................................................................\
..4-92 Battery saver function ................................................4-92
Daytime running light ................................................4-93
Front fog light ............................................................4-97
Headlight escort function ............................................4-92
Headlight welcome function ......................................4-92
SC CAN (ENG) Index.qxp 7/18/2018 5:31 PM Page 6