instrument cluster KIA SEDONA 2021 Features and Functions Guide

13ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
(Button located left of
Steering Wheel)
Power Windows, Window Lock & Central Door Lock
A Pull/Press to operate Front Windows Auto Up/Down*
B Press to Unlock /Lock All Doors
C Press to disable Rear Passenger Windows and Rear Sunroof* passenger controls
REMINDER: When C is pressed, window controls for the Rear Passenger Windows are disabled

Refer to section 4 in the Owner’s Manual for more information.
Power Folding Outside Mirrors *
Press the L or R buttons D to select the mirror to adjust
Press button arrows
E left /right or up/down to adjust mirror position
Toggle button
F left /right to unfold/fold the outside rearview mirrors
Toggle button
F to center to automatically fold/unfold mirrors when:

• The Smart Key* Lock /Unlock buttons are pressed

• The door outside handle button is pressed

•

•Auto Door Lock /Unlock* will engage when the gear shift is moved into or out of the P (Park) position

•To turn Auto Door Lock /Unlock* OFF, go to User Settings* in the LCD Instrument Cluster modes
QUICK TIPS

•

•The mirrors will automatically unfold when the Smart Key* is within close proximity to the vehicle

•To automatically fold mirrors when exiting vehicle, press the LOCK button once on the Smart Key*
QUICK TIPS


Press button again to stop Auto Up/Down function QUICK TIP
Power/Heated Outside Mirrors*
Mirror heaters automatically turn ON/OFF at the same time
the Rear Window Defroster is turned ON/OFF The Rear
Window Defroster button* is located on the climate control
system panel
Refer to section 4 in the Owner’s Manual for more information.
Automatic Door Lock/Unlock
When the gear shift is moved into or out of P (Park), all doors
will Lock /Unlock Refer to the User Settings on how to turn
Auto Door Lock /Unlock ON/OFF
Refer to section 4 in the Owner’s Manual for more information.
Fuel Filler Lid Release Button
Press the Fuel Filler Lid Release button
to release the fuel door
Refer to section 4 in the
Owner’s Manual for more
information..
REMINDER:
To lock position of mirrors, toggle switch to the neutral (center) position
Refer to section 4 in the Owner’s Manual for more information.
A
B
F
CE
D
D
(Button/switch panel located on Driver’s Door )
Button configuration may vary depending on vehicle model.
DRIVER'S PANEL

SEDONA FEATURES & FUNCTIONS GUIDE16*IF EQUIPPED
M I S T:
Single wipe
OFF: Wiper off
I N T: Intermittent wipe
LO: Slow wipe
HI: Fast wipe
PUSH
FRONT
PULL
FRONT
PUSH
PULL
PUSH
FRONT
PULL
FRONT
PUSH
PULL
HI: Fast wipe
LO: Slow wipe
OFF: Wiper off
This illustration is for demonstration purposes only. Actual feature on vehicle
may vary. Refer to section 4 in the Owner’s Manual for more information.
These illustrations are for demonstration purposes only.
Actual feature on vehicle may vary.
Refer to section 4 in the Owner’s Manual for more
information.
A
B
Windshield Wipers & Washers
To o p e r a t e :

• Move lever Up/Down to change wiper modes

• Press button
B Up/Down to adjust Intermittent Wipe Speed

• Pull lever to spray and wipe
Rear Wiper & Washer
To operate:

• Rotate Rear Wiper switch to change Wiper modes

• Push to spray and wipe
LO and HI sets the wiper speed There is no
intermittent wipe function on the Rear Wipers
QUICK TIP
• Pressing button B up increases Intermittent wipe frequency and wipe
speed Pressing the button down decreases the frequency of wipes
• Set the wiper to the OFF position when the wiper is not in use
QUICK TIPS
Turn Signals & Fog Lights*
To o p e r a t e :

• Turn Signals - Move lever Up/Down for Right /Left Turn Signal

• Fog Lights - Press switch
A up/down to turn Fog Lights
ON/OFF

REMINDER: Headlights must be ON for Fog Light operation
The One-Touch Lane Change Signal is activated by briefly
pressing the Turn Signal Lever slightly for less than 1 second
and then releasing The lane change signal will blink 3 times
To change how many times (3/5/7) the Lane Change Signal
blinks, go to the User Settings Mode in the LCD Instrument
Cluster modes
Refer to section 4 in the Owner’s Manual for more information.
STEERING WHEEL CONTROLS

17ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
(Type B shown)
Cruise Control†2 3
A CRUISE Control ON/OFF butt on: Press to turn the Cruise Control ON/OFF
(CRUISE indicator will illuminate on the Instrument Cluster when ON)
B Resume Cruising Speed button: Press up to resume or increase the
cruising speed
Set Cruising Speed button: Press down to set or decrease the cruising speed
C Cruise Control CANCEL button: To cancel the Cruise Control setting, do one of the following:

• Press the brake pedal

• Press the CANCEL but ton


•Cruise Control is designed to function above 20 mph

•The Cruise Control system will not activate until the brake pedal has been depressed
at least once after ignition ON or engine start
QUICK TIPS
REMINDER: Cruise Control is a part of Smart Cruise Control with Stop and Go* and can be set as the operating mode To switch
from Smart Cruise Control (SCC) to Cruise Control, press and hold the CRUISE button A (the SCC system must not be activated
to change modes) Repeat to switch back to SCC mode

Your vehicle’s steering wheel buttons may differ from those in the illustrations.
Refer to section 5 in the Owner’s Manual for more information.
A
B
C
STEERING WHEEL CONTROLS

SEDONA FEATURES & FUNCTIONS GUIDE18*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Smart Cruise Control (SCC) with Stop & Go System *†6,23
The Smart Cruise Control (SCC) with Stop & Go System is designed to maintain a predetermined
distance from vehicles detected ahead by automatically adjusting the driving speed as needed
When traffic is detected, the vehicle will slow down to maintain a set distance behind
traffic without depressing the accelerator or brake pedal
With the SCC on and activated and the vehicle-to-vehicle distance set, when the system detects
a vehicle slowing or stopping, it can bring the vehicle to a complete stop When the vehicle ahead
starts to move forward, the SCC system re-engages If the vehicle ahead stops for more than 3
seconds, the accelerator pedal or the RES+ button must be pressed to start moving the vehicle
To set/adjust the SCC speed:

• Press the CRUISE button
A to turn the system ON The CRUISE indicator will illuminate on the
instrument cluster Accelerate/decelerate to the desired speed

• Press the RES+/SET- button
B down to set the speed The SET indicator light will illuminate
The set speed and vehicle-to-vehicle distance will illuminate on the LCD screen Press the
RES+/SET- button
B up/down to increase/decrease the set speed
To adjust the vehicle-to-vehicle distance setting
C, press the SCC button D on the steering
wheel Images on the LCD screen E will change when scrolling through the settings
To cancel SCC operation: Press the CANCEL button
F or press the brake pedal The CRUISE
indicator on the instrument cluster will turn OFF
To turn the system OFF, press the CRUISE button
A The CRUISE indicator on the instrument
cluster will turn OFF
( Type B; buttons located on
right side of Steering Wheel)
Images are for illustrative purposes
only and may not reflect actual feature
or operation. Actual images or buttons
on vehicle may vary.
Refer to section 5 in the Owner’s
Manual for more information.
REMINDER: Distances are
approximate, based on 56 mph
vehicle speed The SCC vehicle-
to-vehicle distance increments are
based on vehicle speed
A
B
F
E
D


Smart Cruise Control (SCC)
with Stop & Go Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
STEERING WHEEL CONTROLS
17 2 f t 13 0 f t
82ft 10 6 f t
C

SEDONA FEATURES & FUNCTIONS GUIDE32*IF EQUIPPED
REMINDERS:

•
Avoid placing other metal items in the bin while charging as to not impede
the charging area

•
This vehicle is equipped with wireless charging technology which
allows for a device to be charged using inductive charging; however,
device compatibility varies See your Owner’s Manual for more detailed
information and the back page for legal disclaimers

•
Inductive charging systems are less ef ficient than conventional charging
through cable As a result, higher device operating temperatures may be
experienced during use

•
Charging Performance – Device position on the wireless charging system
can affect charging performance Other factors that may affect the
charging rate includes foreign objects, such as coins or pens, and phone
case thickness

•If the driver door is opened, charging will be disabled


Wireless Charging Video

To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODEWireless Smartphone Charging System *
1 Enable Wireless Smartphone Charging System in the User Settings Mode on the Instrument Cluster’s LCD
2 Place a compatible smartphone on the center of the charging pad
A
3 The indicator light B may change to amber once the wireless charging begins
4 Once charging is complete, the amber light may change to green
AUX
USB
Requires QI enabled device or QI enabled case

• The smartphone must be a compatible phone with QI function
available
• Wireless charging must be enabled in user settings
• If wireless charging does not work, move the smartphone
around the pad until the charging indicator turns amber Avoid
placing other metal items in the bin while charging as to not
impede the charging area
•
For wireless charging to occur, all doors (excluding rear hatch)
must be closed & the Smart Key Fob must be detected inside
the vehicleQUICK TIPS
www.youtube.com/KiaFeatureVideos
A
B
Refer to section 4 in the Owner’s Manual for more information.
CENTER PANEL

33ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED
REMINDERS:

•
To reduce the risk of an accident, do not
activate Auto Hold while driving downhill,
backing up or parking your vehicle

•
Do not solely rely on the Auto Hold system
to keep the vehicle stopped Always pay
attention to traf fic and road conditions, and
be prepared to depress the brakes

•Auto Hold turns off when ignition is cycled
Electronic Parking Brake (EPB) *
The Electronic Parking Brake (EPB) system utilizes an electric motor to
engage the parking brake
Applying the Parking Brake
Depress the brake pedal and pull up the EPB switch
A Ensure that the
indicator light is illuminated on the instrument cluster
Releasing the Parking Brake
The EPB will automatically release when the shifter is placed in Reverse
or Drive
To release EPB manually, depress the brake pedal and then press the
EPB switch
A with the ignition switch in the ON position Ensure that
the indicator light
i s O F F
REMINDERS:

•
As a bulb check, the EPB malfunction indicator will illuminate for approximately
3 seconds when the ignition switch is turned ON

•
If the warning light does not illuminate temporarily, or continues to remain lit, take your
vehicle to an authorized Kia dealer and have the system checked

•The EPB should not be operated while the vehicle is moving

•
A click or electric brake motor sound may be heard while operating or releasing the EPB,
but these conditions are normal and indicate that the EPB is functioning properly
P
R
N D
+
_
DRIVE
MODE
AUTO
HOLD
Auto Hold *
Auto Hold temporarily maintains the vehicle at
a standstill even if the brake pedal is released
Auto Hold can be turned ON/OFF using the
AUTO HOLD switch
B on the center panel
Before Auto Hold will operate, the driver’s door,
engine hood and trunk must be closed, and the
driver’s seat belt must be fastened
The Auto Hold indicator has four states:
White: Standby - With vehicle in Park and at
a standstill, and AUTO HOLD switch
B turned
ON, the indicator will illuminate white While
driving the vehicle (vehicle is not at a standstill),
the Auto Hold indicator will remain white
Green: Engaged - When coming to a complete
stop and depressing the brake pedal, the Auto
Hold indicator changes from white to green
OFF (not illuminated) - The indicator will turn
OFF when the AUTO HOLD switch
B is turned OFF or when the EPB is
manually turned ON
Yellow: Malfunction - When the indicator is illuminated yellow, there may
be a system malfunction Take your vehicle to a local Kia dealer


•When leaving your keys with parking lot attendants or valet, make sure to
inform them how to operate the EPB

•If parked on a steep incline/decline, pull up the EPB switch for more than 3
seconds for a firmer EPB application

•Pull up and hold the EPB switch a second time to increase brake pressure if
parked on a decline or incline
QUICK TIPS


Electric Parking Brake
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information QR CODE
www.youtube.com/KiaFeatureVideos
A
B
Refer to section 5 in the Owner’s Manual for more information.
Refer to section 5 in the Owner’s Manual for more information.
CENTER PANEL

SEDONA FEATURES & FUNCTIONS GUIDE36*IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
These illustrations are for demonstration purposes only. Actual features on vehicle
may vary. These illustrations are for demonstration purposes only. Actual
features on vehicle may vary.
Front Seat Headrest Adjustment†1 0
To raise headrest: Pull headrest up
To lower headrest: Press lock
A and then press the headrest down
Driver Position Memory System *
The integrated system stores into memory the position of the Driver’s Seat and
the Outside Rearview Mirrors
To store positions into memory, first place the Gear Shift into P (Park) while the
Engine Start /Stop button* is in the ON position Then:
1 Adjust the Driver’s Seat and the Outside Rearview Mirrors
2 Press the SET button
B on the control panel System will beep once
3 Press one of the memory buttons
C within 5 seconds The system will beep
twice when memory has been stored
Easy Access Function*
• The system will automatically move the driver's seat forward when the
ignition or the Engine Start /Stop button is pressed to ON or the ACC position
• The system will automatically move the driver's seat rearward when
the ignition or the Engine Start /Stop button is pressed to OFF
• To activate or deactivate the Easy Access Function, go to User
Settings in the LCD Instrument Cluster modes
(Buttons located on Driver's Door Panel)
REMINDER: Do not operate the vehicle with the headrests removed Headrests can
provide critical neck and head support in an accident
REMINDER: Do not attempt to operate the driver
position memory system while the vehicle is moving
This could result in loss of control of the vehicle
SEATING


For easy adjustments, hold a headrest post with one hand while using
the other hand to pull the headrest from underneath QUICK TIP
A
B
C
C
Refer to section 3 in the Owner’s Manual for more information.
Refer to section 3 in the Owner’s
Manual for more information.

47ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
Smart Power Liftgate *†21 (continued)
HOLDHOLD
HOLD


To view a video on your
mobile device, snap this
QR Code or visit the listed
website
Refer to page 2 for more
information
Smart Power Liftgate
Video
Power Liftgate Opening
Height Adjustment VideoQR CODE
www.youtube.com/KiaFeatureVideos
• During the Smart Power Liftgate alert, the Smart Power Liftgate can be
deactivated with the Smart Key by pressing any button on the key fob
• The open height can be adjusted For information on how to set the open
height, see page 43 or your Owner’s Manual
QUICK TIP
REMINDERS:

•All doors are closed and locked after about 15 seconds

•If the POWER DOOR OFF button is depressed, the Smart Power Liftgate will not operate

•
The Smart Power Liftgate feature will not operate when the doors are recently closed and
locked, and the Smart Key is still detected after 15 seconds near the vehicle or within 60
inches of the door handles, a door is not locked or closed or the Smart Key is in the vehicle

•
Press any button on the Smart Key fob during the Detect and Alert stage to deactivate the
Smart Power Liftgate function

•Ensure obstacles and people are out of the way of the Liftgate
Smart Key:
To open the Smart Power Liftgate*, press and hold the Smart key Liftgate
button
A until the Liftgate begins opening Press again to close
REMINDER: Pulling the Liftgate upward by the handle or pressing the button a second time
will interrupt the automatic opening of the Smart Power Liftgate
Smart Power Liftgate*
When the Smart Key fob is on your person and you are near the back of
the vehicle, within close proximity, the hazard lights will blink and a chime
will sound for about 3 seconds as an alert that the Smart Power Liftgate*
is about to open
Then the alert system will blink and chime two additional times before
opening the Smart Power Liftgate*
B
The Smart Power Liftgate* feature is OFF by default To enable the Smart
Power Liftgate*, go to User Settings in the LCD Instrument Cluster modes
Refer to section 4 in the Owner’s Manual for more information.
A
B
OTHER KEY FEATURES

49ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS *IF EQUIPPED †LEGAL DISCL AIMERS ON BACK INSIDE COVER
OTHER KEY FEATURES
Driver Attention Warning (DAW) *†7
The DAW system is designed to detect certain inattentive driving practices and, in certain situations, can give a
warning signal to the driver to take a break from driving
The DAW system is set to OFF by default To turn the DAW System ON, turn the ignition on and then select User
Settings in the LCD Display on the Instrument Cluster Then go to Driving Assist and select Driver Attention Warning
Set the DAW System to Normal or Early
Driver Attention Warning (DAW) System modes:
OFF: The Driver Attention Warning system is deactivated
A
Normal: The Driver Attention Warning system alerts the driver of inattentive driving practices
High Sensitivity*/ Early*: The Driver Attention Warning system alerts the driver of inattentive driving practices faster
than Normal mode
If the DAW System is activated, the DAW information will appear on the LCD Display
B when you select the ASSIST
mode

A message, “Consider taking a break,” appears on the LCD display and a warning sounds to suggest the driver to take
a break when the driver’s attention level is below 1
C
REMINDERS:

•The setup of the DAW system will be maintained, as selected, when the ignition is cycled

•
When activated, the DAW system does not display the “Consider taking a break” message when the total trip
driving time is less than 10 minutes

•
The DAW system will enter a standby mode if the camera does not detect the lanes and/or the driving speed
remains under 40 mph
These illustrations are for demonstration purposes only. Actual features on vehicle may vary.
Refer to section 5 in the Owner’s Manual for more information.
Attention Alert System Off
Level Time ——:——Attention Level
LOW HIGH
Level Time 05:27 Attention Level
LOW
HIGH
Level Time 05:27
Consider taking a break
22.4
°C4025km
Attention Alert System Off
Level Time ——:——Attention Level
LOW HIGH
Level Time 05:27
Attention Level
LOWHIGH
Level Time 05:27
Consider taking a break
22.4
°C4025km
Attention Alert System Off
Level Time ——:—— Attention Level
LOW
HIGH
Level Time 05:27
Attention Level
LOWHIGH
Level Time 05:27
Consider taking a break
22.4 °C4025km
ABC