warning KIA SELTOS 2021 Navigation System Quick Reference Guide

2-8
Using the driving assist display
You can see the view around the vehicle through the system
screen.A
A
The displayed screen may differ depending on the vehicle
model.
ÝWarning
When backing up, make sure to follow the guidelines below:
Before entering your vehicle, always check the area behind
your vehicle.
Do not solely rely on the rear view camera when backing up.
Always ensure that it is safe to back up by checking behind
you and looking in the rearview mirrors.
Always back up slowly and stop immediately if you suspect
that a person, especially a child, might be behind you.
ÜCaution
Objects on the screen may not be as close or far as they appear.
Be sure to check the rear, left, and right sides with your own eyes
for safety.
A
A
Applications or functions used through Apple CarPlay
are subject to change according to the policy of Apple
Corporation. For supportable functions, visit the Apple
Corporation website at http://www.apple.com/ios/carplay .
A
A
To use the functions on your smartphone with the minimized
system settings, update the smartphone OS to the latest
version.
A
A
The recognition time may differ depending on the device
type, firmware, and OS version.
A
A
Charges may apply for any mobile data used while Apple
CarPlay is running.
A
A
Some functions may not work properly depending on the
network signal strength.
A
A
Avoid interacting with the smartphone while using Apple
CarPlay.
A
A
You cannot use the following functions when Apple CarPlay is
in use.

Bluetooth

USB mode

Android Auto

Browse function using the [TUNE/
FILE] knob

2-9
a Moving direction lines (yellow)
Displays the vehicle’s moving direction based on the
steering angle.
b Neutral steering lines (blue)
Displays the moving direction if you reverse the vehicle in
neutral. Noting these lines, you can determine whether
the vehicle is stopped in correct direction and the
distances to the neighboring vehicles are adequate.
c Collision warning lines (red)
Used to prevent collision.
d Rear top view button (if equipped)
Press the button to display the rear top view.
e Parking distance warning (if equipped)
Depending on the distance to obstacles, the warning
color and alert sound change along with the level (1/2/3)
to notify of the distance.
f Camera image adjustment
Used to adjust the brightness and contrast of camera
images.
g Center
Used to initialize the brightness and contrast of camera
images.
Using the rear-view display
1 Press the “R” (Reverse) button shifter (or move the
shift lever to “R” in a previous vehicle model) with
the vehicle turned on.
The system automatically displays the rear view with parking
assist guidelines.
2 Safely park your vehicle, checking the rear view
and guidelines.
A
A
The example may differ from the actual screen display.
a
a
b
c
def
Type A
a
a
b
c
d
g
f
Type B

2-10
Viewing the rear top view display (if equipped)
You can look down the rear view from the top through the rear-
view display.
1 On the rear-view screen, press .
2 Check the top view display and assist guide lines.
A
A
The guide lines appear on the rear top view.

Displays the space required to open the trunk. After a
parking, check whether the space is sufficient to open
the trunk and there is no obstacle.

Displays the extension line from the center of the
vehicle. According to the steering direction, the moving
direction of the center is displayed on the screen.
A
A
Available settings may differ depending on the vehicle model
and specifications.
A
A
You can change the motion settings of the rear camera. On
the All Menus screen, press Setup >
Display >
Extend Rear
Camera Use and then check Extend Rear Camera Use to
turn on the function. The rear view appears continuously even
when you change the shift position other than “R” (Reverse)
after reversing (if equipped).
A
A
Noting the parking assist guide lines based on the steering,
you can see the moving direction.
AAA warning sound is heard when the vehicle approaches
obstacles while parking. When you set to automatically lower
the audio volume while parking, it can prevent accidents
caused by failure to hear the warning sound. On the All
Menus screen, press Setup >
Sound >
Driving Guidance >

Parking Safety Priority.
> See “Parking Safety Priority.”

2-12
Configuring the surround view monitor
settings
1 On the surround view screen, press .
2 Select and then change the settings.
To select the information to appear on the video, press
Display Contents. (e.g. Top view parking guidance, rear
view parking guidance, parking distance warning).
To select the default view for top view monitoring, press
Top View Default Mode.
To select the default view for using the surround view
monitor function while driving, press Front View Default
Mode.
Viewing the surround view while reversing
1 Press the “R” (Reverse) button shifter (or move the
shift lever to “R” in a previous vehicle model) with
the vehicle turned on.
The system displays the rear view of the vehicle.
A
A
The surround view monitor function is not available when
you change the shift position to “P” (Park).
2 Press the icon to get a view in the desired
direction.
Icon Description
Displays the zoom-in rear top view and top view.
Displays the rear wide view and top view (default).
Display the rear blind spot view and top view.
Used to adjust the brightness and contrast of the
camera images.
Displays the surround view settings.

3-3
ÝWarning
Driving while distracted can result in a loss of vehicle control
that may lead to an accident, severe bodily injury, or death. The
driver's primary responsibility is the safe and legal operation of
the vehicle, and the use of any vehicle systems, including the
touch screen and steering wheel controls, which take the driver's
eyes, attention, and focus away from the safe operation of the
vehicle, or which are not permissible by law, should never be used
during the operation of the vehicle.
j The list of menu items appears.
Enter Station: Can select or directly enter the desired
radio frequency.
Station List: Can see the list of available radio stations.
FM Radio Noise Control: Customise sound quality when
listening to FM radio by adjusting background noise of the
original sound.
Info: Turns the Radio text information transmitted from
the broadcasting station on and off.
Delete Presets: Can delete a registered channel from the
presets list.
> See “
Deleting a registered channel.”
 Sound Settings: Displays the system sound settings
screen.
> See “
Configuring the sound settings.”
 User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
Split Screen: Can turn on or off the split screen mode.
A
A
The broadcast station names and local information are
displayed using GPS data. Those information may not appear
when there is no GPS data received.
A
A
The displayed broadcast station names may not match the
actual ones.

4-3
ÝWarning
Driving while distracted can result in a loss of vehicle control that
may lead to an accident, severe bodily injury, or death. The driver's
primary responsibility is the safe and legal operation of the
vehicle, and the use of any vehicle systems, including the touch
screen and steering wheel controls, which take the driver's eyes,
attention, and focus away from the safe operation of the vehicle,
or which are not permissible by law, should never be used during
the operation of the vehicle.
Pause/Resume
You can pause or resume playback of a USB music file.
On the USB music playback screen, press or .
Rewind
By using the rewind function, you can listen to music in the USB
device from the desired point during playback.
Perform any of the following methods:
On the USB music playback screen, press and hold .
On the control panel, press and hold the [
SEEK] button.
A
A
You can also run the function by using the Move lever/button
on the steering wheel.
f Used to turn on or off the random playback mode.
g Restart playing the current file or previous file.
h Can pause or resume playback.
i Can play the next file.
j Can see the duration of the playing song and the current
playback position.
k The list of menu items appears.
Media Sources: Opens the media selection window.
Songs by this Artist: Moves to the list of the artist’s songs.
Songs from this Album
: Moves to the list of music albums
that contain the current song.
 Hide Current File: You can hide the file that is playing.
Sound Settings: Displays the system sound settings
screen.
> See “
Configuring the sound settings.”
 User's Manual on Web (QR Code): Displays the QR code
that provides access to the online user manual for the
system.
Split Screen: Can turn on or off the split screen mode.
A
A
The sound effect settings button may appear on the screen
depending on the amp specifications.

5-3
2 Enter the location data such as place name,
address, or coordinates and then press OK.
3 Select a destination from the search result.
A
A
When communication is available, online search is
performed first.
A
A
You can see the sites in the list on the preview screen at
the right.
A
A
To sort the search results in a different order, press on the
attribute to toggle between options.
Finding a route easily
ÝWarning
Driving while distracted may cause a loss of vehicle control
that may lead to an accident, severe bodily injury, or death. The
driver’s primary responsibility is the safe and legal operation of
the vehicle, and the use of any devices or systems that take the
driver’s attention away from driving.
1 Perform any of the following methods:
On the All Menus screen, press Navigation Menu
>

Places.
 On the map screen, press .
A
A
Press and hold the [ NAV] button on the control panel to
enter into Places.

5-6
a Displays the Home screen.
b Used to change the map display mode.
 (Heading Up): Rotates the map depending on the
travel direction.
 (North Up): Displays the map with the north fixed at
the top.
 (3D Map): Rotates the map depending on the travel
direction for 3D view.
c You can adjust the volume of navigation or GPS warning
sound.
d Zooms in the map.
e The scale of the map automatically changes.
f Zooms out the map.
g Displays the point to change the driving direction.
h Displays the next point to change the driving direction.
i Displays the lanes in different colors.
 Orange: Recommended lane
White: Available lane
Gray: Unavailable lane
Map screen
The map screen provides various functions and information, as
follows:
i
hg
j
a
b
c
d
e
f
klm
n
Type A
o
7\SH%(9R\
QO\\f

5-7
Using the detailed guidance
When the vehicle needs to change the driving direction or lanes,
a zoomed-in map automatically appears.A
A
To display or hide the detailed guidance, press
or .
When the detailed guidance appears while driving,
select and perform the desired function.
To check information on the zone for a turn, press Simple.
To check the types and locations of convenience facilities in a
rest area, press Rest Area.
For information details about each zone such as intersections,
interchanges, and rest areas, press Details.
j Displays quick menu items that can be used during guidance.
k Can cancel the route guidance. > See “
Stopping the route
guidance.”
l Displays the remaining distance to the destination and
the estimated time of arrival. For more details, press the
information item.
m Displays or hides the detailed guidance.
n You can see the system information on the map. (It can
display up to two items.)
 Traffic information (with an icon if there is no HD data
reception)
Bluetooth connection status
o Check the range you can drive with the current amount of
battery (EV only).
A
A
To see only the map with no destination, press the map area
on the Home screen or on the All menu screen, press Map. Or
press the [ MAP] button on the control panel.
A
A
The screen may differ depending on the vehicle model and
specifications.
ÝWarning
Be sure to check the road conditions while driving, because the
camera information may get changed occasionally after a map
update to the latest version. Relying solely on the driving assist
system may cause violation of traffic rules and regulations,
resulting in an accident.

5-8
Stopping the route guidance
To stop route guidance, press Pause Route.
The destination displayed at the bottom of the screen disappears
and the Pause Route is replaced by Resume Route.A
A
To resume guidance to the previous destination, press
Resume Route.
A
A
To cancel guidance to the destination, press and hold Pause
Route , Resume Route , or Navigation Menu >
Cancel Route
on the All Menus screen.
Seeing traffic Information
You can see real-time traffic information such as ongoing road
works or accidents.
1 On the map screen, press > Traffic.
Adjusting the navigation volume
You can adjust the volume of navigation or GPS warning sound.
On the map screen, press and then press or ,
or use the control bar to adjust the volume.
A
A
To have the navigation sound always output first over media
sound, check Navigation Volume Priority.
A
A
To turn off the navigation sound, press
and then press .