turn KIA SELTOS 2021 Navigation System Quick Reference Guide

9-4
Warning Timing (if equipped)
If necessary, set the time to output alerts when any alarm is
generated by driver attention warning and forward safety system.
Warning Volume (if equipped)
You can adjust the volume of the alert sound upon danger of
forward or blind spot collision.
Driver Attention Warning (if equipped)
If necessary, set to output alerts to prevent accidents by analyzing
the driving patterns.
Leading Vehicle Departure Alert: When the leading vehicle
departs, the notification is provided.
ÝWarning
Be sure to always check the road conditions ahead or
surroundings before departure. An accident caused by
distracted driving can be prevented.
Safety Notice Call: Used to set to make a call for checking
your safety to UVO Center when suspected that vehicle
movement is dangerous.
Inattentive Driving Warning: Set the system to remind
when it detects a distracted driving pattern and suggest to
take rest if needed.
Highway Driving Assist: Assists driving in a highway
according to the set speed and distance to the leading vehicle
while keeping the vehicle centered in the lane.
A
A
The highway driving assist system operates only on a
highway. When the vehicle exits from the highway, the
system is turned off automatically.
Highway Auto Speed Zone Slowdown: The driving speed
automatically decreases in the expressway speed zone.
A
A
The highway auto speed zone slowdown system operates
only on a highway. When the vehicle exits from the
highway, the system is turned off automatically.
A
A
It operates considering the speed cameras located on the
selected route.
Highway Auto Curve Slowdown: The driving speed
automatically decreases in the highway curve zone.
A
A
It operates based on the curve zones on the route. When
the destination is not set, it operates based on the curve
zones on the expected path.

9-5
Lane Safety (if equipped)
Set to generate warning or provide assist to help the vehicle stay
in its lane.
Lane Keeping Assist: Helps prevent lane deviation by
generating warning sound and help the vehicle between stay
in its lane.
ÝWarning
The Lane Keeping Assist (LKA) system is not a substitute for
safe driving practices, but a convenience function only. It
is the responsibility of the driver to always be aware of the
surroundings and steer the vehicle.
ÜCaution
When the lanes are not recognized well by front cameras,
always check the surroundings because the lane keeping
assist system may not work properly.
Lane Departure Warning: When a danger of lane deviation
is detected, the warning sound is generated.
Off: Turns off the lane safety function.
Forward Safety (if equipped)
You can set to help detect and monitor the vehicle ahead.
Active Assist: Helps mitigate a collision by generating a
warning sound and may provide braking assist. Ref. to
owners' manual for details.
ÝWarning
This system is only a supplemental system and it is not
intended to, nor does it replace the need for extreme care
and attention of the driver. The sensing range and objects
detectable by the sensors are limited. Pay attention to the
road conditions at all times.
Warning Only: Produces a warning alarm in accordance with
the collision risk level.
Off: Turns off the forward safety function.

9-6
Active Assist: Helps prevent collision by generating warning
sound and helping you adjust the vehicle speed if any
suspected blind spot collision danger.
ÝWarning
Always be aware of road conditions while driving and be
alert for unexpected situations even though the Blind-Spot
Collision Warning system and Blind-Spot Collision Avoidance
Assist system are operating.
Warning Only: When a danger of blind spot collision is
detected, the warning sound is generated.
Off: Turns off the blind spot safety function.
Blind-Spot Safety (if equipped)
You can set to generate warning sound and may provide active
assist if there is a possible collision with an approaching vehicle
while changing lanes.
Blind-Spot View: Displays the blind spot view on the
instrument cluster when the turn signal lamp is blinking.
Safe Exit Assist: Help prevent the passengers from opening
a door by warning the passengers when an approaching
vehicle from the rear area is detected after the vehicle stops.
ÜCaution
The Safe Exit Assist (SEA) system may not operate
normally when a vehicle is coming rapidly two lanes over
from your vehicle or a vehicle is approaching at a fast
speed from the rear in the lane next to your vehicle.
The Safe Exit Assist (SEA) system may not operate
normally if there is any vehicle or obstacle at the rear
area of your vehicle.
The Safe Exit Assist (SEA) system may be activated later
than normal or may not operate normally if a vehicle is
approaching fast from the rear of your vehicle.
The Safe Exit Assist system may not operate when the
blind spot detection system malfunctions as follows:

The blind spot collision warning message appears on
the instrument cluster.

The sensors of the blind spot detection system are
contaminated or covered.

The blind spot detection system does not generate
warning or generates a wrong alert.

9-7
Drive Mode (if equipped)
You can change the vehicle settings for driving conditions.
Type A
Type B (EV only)
A
A
The screen may differ depending on the vehicle model and
specifications.
Parking Safety (if equipped)
You can set to generate warning sound and may provide assist
when an obstacle is detected while parking.
Surround View Monitor Auto On: Display the feed from
the surround view monitor automatically when the parking
distance warning is on (if equipped).
Parking Distance Warning Auto On: Automatically turns on
the alarming function depending on the distance to obstacles
upon parking or driving in low speeds.
Rear Cross-Traffic Safety: Assists to generate warning sound
and may provide assist if a potential collision is detected when
the vehicle is in reverse.
Active Assist: Helps prevent collision by generating warning
sound and may provide braking assist if a potential collision is
detected while the vehicle reversing.
Warning Only: The warning sound is generated if a danger
of collision is detected when reversing the vehicle.
Off: Turns off the parking safety function.
ÝWarning
Even though the vehicle is equipped the parking safety
system, be sure to check any obstacles in the rear while
driving. Relying solely on the driving assist system may cause
an accident. Accordingly, be sure to control the vehicle by
your judgment.
When the sensors cannot detect any obstacles due to the
detection limit, it may cause an accident. Be sure to always
check the surroundings while parking.

9-10
Lights (if equipped)
You can configure the settings for vehicle lights.
A
A
The screen may differ depending on the vehicle model and
specifications.
Ambient Light (if equipped)
You can set the brightness and color of the ambient light.
One Touch Turn Signal (if equipped)
You can set the number of turn signal lamp flashes when the
lamp lever is operated.
Headlight Delay (if equipped)
You can set to turn off the taillights and headlights in 15 seconds
after turning off the vehicle to ensure visibility.
High Beam Assist (if equipped)
You can set to automatically control the high beam when an
oncoming vehicle is approaching to decrease the high beam
glare.
Door (if equipped)
You can configure the operation environment for the trunk and
doors.
Auto Lock (if equipped)
You can set the time to automatically lock all doors.
Auto Unlock (if equipped)
You can set the time to automatically unlock all doors.

9-12
Content Selection (if equipped)
You can set the content to display on the instrument cluster.
Gear Position Pop-up: When the gear is shifted, the
information pop-up appears.
Wiper/Lights Display
: When the wiper or light lever operates,
the operation mode appears.
 Traffic Signs: Displays the road information such as speed
bumps and speed limits.
Icy Road Warning: When the outside temperature drops
below 4 °C (39 °F), the possibility of road icing appears.
Cluster Voice Guidance Volume (if equipped)
You can adjust the volume of guiding beep.
Welcome Sound (if equipped)
You can set to generate the notification sound when turning on
or off the instrument cluster.
Convenience (if equipped)
You can configure the features for convenience such as welcome
sound and wireless charging.
Welcome Mirror/Light (if equipped)
You can set the welcoming time on the outside rear-view mirrors.
Enable on Driver Approach: When the driver with the smart
key approaches, the welcome feature is enabled.
Wireless Charging System (if equipped)
You can set to charge your smartphone wirelessly.
A
A
This feature is available only in smartphones that can be
charged wirelessly.

9-15
Bluetooth
You can register or delete a Bluetooth device for the system and
connect or disconnect a registered device. You can also configure
operation settings such as notifications, messages, and other
settings for Bluetooth devices.
A
A
For more information on how to use the Bluetooth functions:
> see “Connecting a Bluetooth device.”
A
A
Some setting options appear when a smartphone is
connected to the system.
A
A
To edit or delete a message, park the vehicle at a safe place
and access the messaging function on your smartphone. You
cannot edit or delete a message from the system. A
A
When an iPhone is connected to the system, there are some
restrictions when receiving messages as follows:

Only the sender name appears when the sender
information is saved.

Only the phone number appears when the sender
information is not saved.

You cannot use the auto-reply message function.

When the incoming message notification or lock-screen
view option is off, messages cannot be received.
A
A
The message reader function may not be supported
depending on the system language.
Bluetooth Connections
You can register or delete a Bluetooth device from the system
and connect or disconnect a registered device.
A
A
You can add one Bluetooth hands-free kit or up to two
Bluetooth audio devices.
Auto Connection Priority
Set the priority order for automatic Bluetooth connection to the
system when it turns on.
A
A
On the device list, press
on the right and drag the item to
reposition.

9-17
Configuring the advanced
system settings
(if equipped)
You can configure the settings for notification and button actions.
1 On the All Menus screen, press Setup >

Advanced.
The advanced settings screen appears.
2 Configure the settings required:
Return to Map: Set Time
You can set the system to automatically display the map screen
after a specified period of time when switched to the Radio/Media
mode screen while using the navigation.
A
A
This function works while driving once a destination has been
set.
A
A
This feature is not available on the phone projection screen.

9-26
Dynamic Speed Compensation (if equipped)
Provides a stable listening environment by adjusting the audio
volume depending on the vehicle speed.
FM Radio Noise Control
You can customize sound quality when listening to FM radio by
adjusting background noise of the original sound.
Subsystem Volumes
You can adjust the volume for each system function and initialize
all volume settings.A
A
To initialize all system sound settings, press Reset.
Connected Device Volumes
You can adjust the volume of the phone projection and initialize
all volume settings.
Android Auto: Vary the volume of your Android smartphone,
connected to the system, depending on the function.
Apple CarPlay: Vary the volume of your iPhone, connected to
the system, depending on the function.
A
A
To initialize all system sound settings of the phone projection,
press Reset.
Speed Dependent Volume Control
Automatically adjusts Audio volume according to vehicle speed.
Start-up Volume Limit
You can set to automatically decrease the audio volume to an
adequate level when turning on the vehicle.

9-27
Configuring the voice
recognition settings
You can change the settings for voice recognition.
1 On the All Menus screen, press Setup >
Voice
Recognition.
The voice recognition settings screen appears.
2 Configure the settings required:
A
A
Press Menu >
Search for Settings or press and enter a
keyword to search for a setting item. You can also search for a
setting item by voice.
Guidance
You can set whether to hear the voice recognition guidance
briefly or in detail. You can also turn off the voice guidance.
Reset
You can initialize all the sound settings.
Turning on/off the screen touch sound
To turn on or off the touch sound on the screen,
press Beep at the top of the screen.