KIA SORENTO PHEV 2023 Features and Functions Guide

29†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
DRIVE
SPORT
SMART
AUTO
HOLD
ECO
MUD
SAND SNOW
TERRAIN
P
R
D
N
(Located below gear shift knob)
Surround View Monitor (SVM) is a parking support system that shows the areas around the front, rear, left and right sides of the vehicle via four wide-view cameras displayed onto the infotainment system screen

Press A to turn SVM ON/OFF
SVM will operate when:
•The Parking/ View button A is pressed with the gear in D (Drive) or N (Neutral) when vehicle speed is below 9 mph (15 km/h)
•Parking/ View button A is pressed with the gear in P (Park)
•The gear shift is in R (Reverse) When the gear is in R (Reverse), Surround View Monitor will turn ON regardless of vehicle speed or button status
•The gear shift is changed from R (Reverse) to N (Neutral) or D (Drive) when vehicle speed is below 9 mph (15 km/h)
Off Conditions:
•Parking/ View button A is depressed
•When vehicle speed is above 9 mph (15 km/h), SVM will turn off and the screen will change back to the previous infotainment system screen
•One of the infotainment system buttons is pressed without the gear in R (Reverse) The screen will change back to the previous infotainment system screen
The Surround View Monitoring (SVM) is only a supplemental device Drivers should not rely solely on the SVM information when parking and backing up Drivers should always pay at tention and directly check the left/right and rear
Images are for illustrative purposes only and may not reflect actual feature or operation
See section 5 in the Owner ’s Manual for more information
REMINDERS:
•
The wide-view camera is equipped with an optical lens to provide a wider range of vision and may appear different from the actual distance The Surround View Monitor system is only a supplemental device Drivers should not rely solely on the SVM information when parking and backing up Drivers should always pay at tention and directly check the left/right and rear
•
While the SVM is active the volume will be lowered on all audio modes if you select ‘Driver Assistance > Warning Method > Parking Safet y Priorit y of Vehicle set tings in the Infotainment System
•
Through normal use and after washing or inclement weather, the rear camera may need cleaning Use a clean, microfiber cloth to remove any dir t, debris or spots that may have accumulated on the lens
Surround View Monitor (SVM)*†3
To change the SVM settings, press the onscreen settings icon B, while SVM is operating
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Surround View Monitor (SVM) Video
QR CODE
The Front wide-view camera will turn off when the gear shift is moved into Park or Reverse or the Parking View but ton is pressed
QUICK TIP
B
A
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
ADAS

30†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSORENTO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
OK
MODE
OK
MODEMODE
OKOK
OKOK
OKOK
OK
MODE
MODEMODE
MODEMODE
OK
MODE
MODEMODE
OK
MODEMODE
Rear Cross-traffic Collision - Avoidance Assist (RCCA)*†3
REMINDERS:
•
When vehicle power is cycled, RCCA will remain in the previous state
•
When a vehicle is approaching within the sensing range, and traveling faster than 3 mph, the RCCA system will show a warning
•
RCCA is a supplemental system Do not solely rely on this system and always pay at tention to the road and its conditions
Rear Cross-traffic Collision-Avoidance Assist (RCCA) is designed to warn the driver, under certain conditions, may temporarily apply braking if it detects cross traffic approaching the vehicle, when vehicle is in reverse A
RCCA will sound a warning, the warning indicators on the outside rearview mirror will illuminate and a message will appear on the Instrument Cluster LCD B If RCCA detects that the collision risk has increased, the system automatically applies the brakes to reduce your
speed, potentially helping to minimize the effects of a possible collision
RCCA is designed to operate under the following conditions:
•
When the gear shift is in Reverse
•When the vehicle is moving slower than 7 5 mph
RCCA Settings:
•RCCA can be turned on/off by going to the User Settings* in the Instrument Cluster or the Vehicle Settings* in the Infotainment System
•Only adjust settings when the vehicle is at a standstill, gear shift is in Park and the ignition is on or the Engine Start/Stop button* in the on position
•To access User settings* in the Instrument Cluster - Press the Mode button C on the Steering Wheel to toggle to User Settings Press the OK D up/down to toggle to DRIVER ASSISTANCE, then PARKING SAFETY Select REAR CROSS TR AFFIC SAFET Y and press the OK button D
•To access Vehicle settings* in the Infotainment System – Press the SETUP key or the onscreen SETUP button Press VEHICLE to enter Vehicle Settings Select DRIVER ASSISTANCE, then PARKING SAFET Y and select REAR CROSS TR AFFIC SAFET Y
•
To set the initial warning activation time, go to User Settings , press the OK button D up/down, then go to DRIVER ASSISTANCE, WARNING TIME and press the OK button
There are two settings:
– Standard: This setting allows for a nominal amount of distance between the vehicles before the initial warning occurs
– Late: Reduces the amount of distance between the vehicles before the initial warning occurs
Refer to section 6 in the Owner ’s Manual for more information
(But tons located on steering wheel)
The Warning Volume can be adjusted in the User Set tings* in the Instrument Cluster (Go to Driver Assistance, then Warning Volume) or the Vehicle Set tings* on the infotainment system Go to Driver Assistance, Warning Method, then Warning Volume
QUICK TIP
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Rear Cross-traffic Collision - Avoidance Assist (RCCA) Video
QR CODE
A
B
C
D
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
ADAS

31†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
The Warning Volume can be adjusted in the User Set tings* in the Instrument Cluster (Go to Driver Assistance, then Warning Volume) or the Vehicle Set tings* on the infotainment system Go to Driver Assistance, Warning Method, then Warning Volume
QUICK TIP
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
Reverse Parking Collision-Avoidance Assist is a supplemental system that is designed to assist the driver when the vehicle is in reverse by sounding a warning and temporarily braking, if a pedestrian or any object is detected within the sensing area of the rear of the vehicle, or to help reduce the possibility of a collision
PCA Settings:
•PCA can be turned on/off by going to the Vehicle Settings* in the Infotainment System
•Only adjust settings when the vehicle is at a standstill, gear shift is in Park and the ignition is on or the Engine Start/Stop button* in the on position
•To access Vehicle settings in the Infotainment System - Press the SETUP key or the onscreen SETUP button Press VEHICLE to enter Vehicle Settings Select DRIVER ASSISTANCE, then PARKING SAFETY
•There are three modes:
- Rear Active Assist – PCA will warn the driver with an audible alert and may apply temporary braking
- Rear Warning Only – PCA will warn the driver with an audible alert
- Off – PCA is disabled
To set the initial warning activation time, go to User Settings, press the OK button A up/down, then go to DRIVER ASSISTANCE, WARNING TIME and press the OK button A
There are two settings:
•Normal: This setting allows for a nominal amount of distance between the vehicles before the initial warning occurs
•Late: Reduces the amount of distance between the vehicles before the initial warning occurs
Reverse Parking Collision-Avoidance Assist (PCA)*†3
Reverse Parking Collision-Avoidance Assist (PCA)* is not a substitute for proper and safe backing-up procedures Always drive safely and use caution when backing up Reverse Parking Collision-Avoidance Assist (PCA) may not detect ever y object around the vehicle See section 6 in the Owner ’s Manual for more information
OK
MODE
OK
MODEMODE
OKOK
OKOK
OKOK
OK
MODE
MODEMODE
MODEMODE
OK
MODE
MODEMODE
OK
MODEMODE
(But tons located on right side of the steering wheel)
A
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Reverse Parking Collision-Avoidance Assist (PCA) Video
QR CODE
ADAS

32†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSORENTO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
REMINDERS:
•
If the vehicle is moving at speeds over 3 mph, the system may not activate correctly
•
When more than t wo objects are sensed at the same time, the closest one will be recognized first
Forward/Reverse Parking Distance Warning (PDW) is a supplemental system that is designed to assist the driver by chiming if any object is detected within the sensing area to the front, rear and side of the vehicle when backing up
To turn PDW on, press the Parking Safety button A (LED illuminated) To turn PDW off, press again A (LED not illuminated)
PDW will activate when the ignition is on/ready and the vehicle is in D (Drive) or R (Reverse)
Parking Distance Warning Auto On – To set the parking distance warning to be on at low speeds, enable it in the User Settings* in the Instrument Cluster or the Vehicle Settings* in the infotainment system
To enable in User settings* in the Instrument Cluster - Press the Mode button B on the Steering Wheel to toggle to User Settings Press the OK button C up/down to toggle to DRIVER ASSISTANCE, then PARKING SAFETY, and select PARKING DISTANCE WARNING AUTO ON
To enable in Vehicle settings* in the Infotainment System – Press the SETUP key or the onscreen SETUP button Press VEHICLE to enter Vehicle Settings Select DRIVER ASSISTANCE, then PARKING SAFET Y and select PARKING DISTANCE WARNING AUTO ON
Forward/Reverse Parking Distance Warning (PDW)†3
(Located below gear shift knob)
DRIVE
SPORT
SMART
AUTO
HOLD
ECO
MUD
SAND SNOW
TERRAIN
P
R
D
N
For ward/Reverse Parking Distance Warning (PDW) is not a substitute for proper and safe backing-up procedures
Always drive safely and use caution when backing up For ward/Reverse Parking Distance Warning (PDW) may not detect ever y object around the vehicle
See section 5 in the Owner ’s Manual for more information
Images are for illustrative purposes only and may not reflect actual feature or operation
A
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Forward/Reverse Parking Distance Warning (PDW) Video
QR CODE
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
OK
MODE
OK
MODEMODE
OKOK
OKOK
OKOK
OK
MODE
MODEMODE
MODEMODE
OK
MODE
MODEMODE
OK
MODEMODE
(But tons located on right side of the steering wheel)
C
B
The Warning Volume can be adjusted in the User Set tings* in the Instrument Cluster (Go to Driver Assistance, then Warning Volume) or the Vehicle Set tings* on the infotainment system Go to Driver Assistance, Warning Method, then Warning Volume
QUICK TIP
ADAS

33†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
See section 5 in the Owner ’s Manual for more information
The ESC system is designed to help stabilize the vehicle during certain cornering maneuvers It is a good idea to keep the ESC turned on for daily driving whenever possible
Press the ESC OFF button B to turn Traction Control OFF/ON
To turn OFF both the Traction Control and Stability Control, press and hold for more than 3 seconds Press it again to turn ON
HAC helps prevent the vehicle from rolling backwards when accelerating from a stop while on a steep incline The HAC automatically activates whether the ESC is OFF or ON but does NOT activate when the ESC has malfunctioned
REMINDERS:
•
ESC is active by default at vehicle star tup When the ignition is cycled, ESC will turn ON again
•
The ESC Indicator Light in the instrument cluster will illuminate whenever the ESC is in operation
See section 6 in the Owner ’s Manual for more information
Electronic Stability Control (ESC)†5
Hill-start Assist Control (HAC)†5
REMINDERS:
•
HAC does not operate when the gear shift is in the P (Park) or the N (Neutral) position
•In the event of HAC system malfunction, see an Authorized Kia Dealer for ser vice
•
HAC does not replace the need to apply brakes while the vehicle is stopped on an incline
HOLD
HOLD
#VU UPO
QBOFM
MPDBUFE
MFGU
PG
4UFFSJOH
8IFFM

Instrument Cluster Illumination Control
With the parking lights/headlights ON, press the button A (+) or (-) to adjust the brightness of the instrument panel illumination
REMINDER: The Instrument Cluster illumination Control does not adjust brightness on the infotainment system screens Use the display set tings in the Setup menu to adjust the brightness on the screen
AB
See section 6 in the Owner ’s Manual for more information
•When HAC is active (e g , during initial acceleration from a stop on an incline), you may notice that the brakes will momentarily remain engaged after you depress the accelerator – this is normal HAC operation
•HAC provides a t wo-second delay before the vehicle may star t rolling backwards
QUICK TIPS
DRIVER’S PANEL
DRIVER’SPA N EL

34†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDSORENTO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
LRLRLR
Reverse Parking Aid Function*Engine Start/Stop Button*†6
When the gear shift lever is moved into R (Reverse) and while the vehicle is moving backward, the outside rearview mirrors A will rotate downward to aid in reverse parking
When the left or right mirror buttons B are depressed, the Reverse Parking Aid Function will operate (LED lit)
To turn OFF the function, press the buttons to the center position.
The outside rearview mirrors will automatically return to their original positions when:
•The Engine Start/Stop Button is in the OFF position
•The gear shift lever is moved to any position except R (Reverse)
•
Outside rearview mirror buttons are not depressed
REMINDER: When one of the outside rear view mirror switches are not depressed (LED lit), the Reverse Parking Aid Function will not operate and the outside rear view mirrors will not rotate downward
To start the engine:
1 Depress the brake pedal
2
Press the Engine Start/Stop button while gear shift is in P (Park) or N (Neutral)
To turn the engine OFF: Press the Engine Start/Stop button
To use the Engine Start/Stop button, you must have the Smart Key fob inside the vehicle
REMINDERS:
•
In an emergency situation while the vehicle is in motion, you are able to turn the engine off and to the ACC position by pressing the Engine Star t/Stop but ton for more than 2 seconds or 3 times successively within 3 seconds
•
If the Smar t Key bat ter y is weak or not working properly, hold the Smar t Key fob up to the Engine Star t/Stop but ton (Lock but ton side closest) and press to star t engine
(But ton/switch panel located on Driver ’s Door)
With the engine off, hydraulic power assist for steering and braking will be disabled and the vehicle will be more dif ficult to control
See section 6 in the Owner ’s Manual for more information
See section 5 in the Owner ’s Manual for more information
ABRefer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Start/Stop Button Video
Kia Smart & Folding Key Fobs Video
QR CODE
To use electrical accessories:
ACC position
•When in the OFF position and without depressing the brake pedal, press the Engine Star t/Stop but ton once (amber light)
ON position
•When already in the ACC position (amber light) and without depressing the brake pedal, press the Engine Star t/Stop but ton (red light)
•
When in the OFF position and without depressing the brake pedal, press the Engine Star t/Stop but ton t wice (red light)
Keeping the vehicle in the ACC or ON position for extended periods of time without turning the engine on may discharge the vehicle’s battery
QUICK TIPS
DRIVER’S PANEL
DRIVER’SPA N EL

35 *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
Power Windows, Window Lock
& Central Door Lock
A Pull/Press to operate Front Windows Auto Up/Down*
B Press to Unlock/Lock All Doors
C Press to disable Rear Passenger Windows
REMINDERS:
• When pressed C, window controls for the Rear Passenger Windows are disabled
•When closing, be mindful of any objects or persons
Press button C to lock the rear passenger doors An indicator will illuminate showing the system is active
This system is on by default, and then activated once the button C is pressed To deactivate, press the button again
See section 5 in the Owner ’s Manual for more information
But ton configuration may var y depending on vehicle model Refer to section 5 in the Owner ’s Manual for more information
Auto Door Lock/Unlock will engage when the gear shift is moved into or out of the P (Park) position Refer to the User Settings mode in the LCD Instrument Cluster or the infotainment system on how to turn Auto Door Lock/Unlock ON/OFF
LRLRLR
(But ton/switch panel located on Driver ’s Door)
A
B
C
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Electronic Child Safety Lock System Video
QR CODE
While driving with the rear windows down or with the sunroof* in an open or par tially open position, a wind buffeting or pulsation noise may be heard This noise is a normal occurrence and can be reduced or eliminated by the following:
•If the noise occurs with one or both of the rear windows down, par tially lower both front windows approximately 1 inch
•If the noise occurs with the sunroof open, slightly reduce the size of the sunroof opening
QUICK TIPS
Press but ton again to stop Auto Up/Down function
QUICK TIP
Electronic Child Safety
Lock System
Automatic Door Lock/Unlock
DRIVER’S PANEL
DRIVER’SPA N EL

36 *IF EQUIPPEDSORENTO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
Power Folding Outside Mirrors*
REMINDERS:
•
When the mirror but ton B is in the center, press the Lock but ton on the Smar t Key to automatically fold the mirrors
•
To lock the position of mirrors, toggle switch to the neutral (center) position
B Press the L or R buttons to select the mirror to adjust
C Press button arrows left/right or up/down to adjust mirror position
D Toggle button left/right to unfold/fold the outside rearview mirrors
B Toggle button to center to automatically fold/unfold mirrors when:
•The Smart Key* Lock/Unlock buttons are pressed
•The door outside handle button* is pressed
LRLRLR
(But ton/switch panel located on Driver ’s Door)
B
C
D

The mirrors will automatically unfold when the Smar t Key* is within close proximit y to the vehicle
QUICK TIP
Mirror heaters are activated when the Rear Defroster is turned on A
Refer to section 5 in the Owner ’s Manual for more information
To fold the mirrors in manually, pull the mirror towards the window
Refer to section 5 in the Owner ’s Manual for more information
Images are for illustrative purposes only and may not reflect actual feature or operation
If needed, pull the mirror firmly until it folds
QUICK TIP
Power/Heated Outside Mirrors*
Manual Folding Mirrors*
AUTO
OFF
DRIVER
ONLYA/CREAR
SYNC
REAR FRONT
A/C
68.568.5
A
(But ton located on Climate Control panel)
DRIVER’S PANEL
DRIVER’SPA N EL

To adjust the Steering Wheel, press the Lock-Release Lever A down and adjust the desired angle B and distance C
When finished, pull the Lock-Release Lever A up to lock the Steering Wheel in place
Do not at tempt to adjust steering wheel position when vehicle is in motion as this may cause you to lose control of the vehicle
For illustrative purposes only Your steering wheel may var y See section 5 in the Owner ’s Manual for more information
Tilt/Telescoping Steering Wheel†1 7
37†LEGAL DISCL AIMERS ON BACK INSIDE COVER | *IF EQUIPPEDALWAYS CHECK THE OWNER ’S MANUAL FOR COMPLETE OPER ATING INFORMATION AND SAFET Y WARNINGS
A
B
C
To adjust the steering wheel angle, it may be helpful to first adjust the steering wheel’s distance from the driver
QUICK TIP
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
Tilt/Telescoping/Heated Steering Wheel Video
QR CODE
OFFOFF
AUTO
OFFOFF
AUTO
DE
F
Turn Signals & Fog Lights*
To operate:
•Slightly move lever up/down to activate One-Touch Lane Change Signal D
•Turn Signals – Move lever Up/Down for Right/Left Turn Signal E
•Fog Lights – Press toggle switch F to turn Fog Lights ON/OFF
REMINDER: Headlights must be ON for Fog Light operation

One-Touch Lane Change Signal is activated by briefly pressing the Turn Signal Lever up/down slightly for less than 1 second and then releasing D The lane change signal will blink 3 times
To turn the One-Touch Lane Change Signal off/on, go to User Settings Mode in the LCD Instrument Cluster or the infotainment system
Refer to section 5 in the Owner ’s Manual for more information
For illustrative purposes only Your actual display, but tons and/or features may var y
One-Touch Lane Change Signal
STEERING WHEEL CONTROLS
STEERING

WHEEL CONTROLS

OFFOFF
AUTO
OFFOFF
AUTO
REMINDERS:
•
High Beam Assist does not operate below cer tain speeds, or in some lighting and driving conditions
Please be aware of your surroundings and exercise proper road etiquet te when operating a vehicle using the high beams
•HBA will operate when vehicle speed exceeds 25 mph
•
If the lever is pushed away from you while HBA is operational, HBA will turn off and the high beams will be on continuously If the lever is pulled toward you when the high beam is off, the high beam will turn on without High Beam Assist canceled If the lever is pulled towards you when the high beam is on by High Beam Assist, low beam will be on and the High Beam Assist will turn off
•
If the light switch is switched to the headlight position, HBA will turn off and low beams will be on continuously
•
When HBA is not working properly, the ‘Check High Beam Assist system’ warning message will appear and warning light will appear on the cluster See an authorized Kia dealer for ser vice
REMINDER: DRL only operates during the day time
38 *IF EQUIPPEDSORENTO HYBRID / PLUG-IN HYBRID FEATURES & FUNCTIONS GUIDE
C
Refer to the inside front cover for more information on QR codes www youtube com/KiaFeatureVideos
High Beam Assist (HBA) Video
QR CODE
High Beam Assist is designed to automatically adjust the headlight range by switching between high and low beams based on light detected from other vehicles and road conditions
To enable HBA , toggle the light switch to the AUTO Light position and push the lever away from you The High Beam Assist indicator will illuminate
High Beam Assist (HBA)
To operate:
•Rotate the switch to change the Headlight function A
•Push the lever to turn the High Beams ON B
•Pull the lever to flash the Headlights/High Beams C
AUTO Light position* – When the light switch is in the AUTO Light position, the tail lights and headlights will turn ON/OFF automatically depending on the amount of light outside the vehicle
Daytime Running Lights (DRL)* – DRL may help others to see the front of your vehicle during the day The lights will turn on automatically when the ignition or Engine Start/Stop button is ON and the headlight switch is in the AUTO position, unless one of the
following occurs:
•Headlights are on
•Parking brake is applied
•Engine is turned off
•Headlight switch is in the OFF position
Headlight position
Parking light position
AUTOAuto Light / HBA* / DRL*
OFFOFF position
Headlights & High Beams
See section 5 in the Owner ’s Manual for more information
STEERING WHEEL CONTROLS
STEERING

WHEEL CONTROLS
A
B