wheel torque LAMBORGHINI GALLARDO 2009 Workshop Manual
[x] Cancel search | Manufacturer: LAMBORGHINI, Model Year: 2009, Model line: GALLARDO, Model: LAMBORGHINI GALLARDO 2009Pages: 1659, PDF Size: 95.1 MB
Page 122 of 1659
20a
20b
20c
20d
L714 00 08 00
20
A
B
A
A
A
B
DESCRIPTION TIGHTENING TORQUE (Nm) PICTURE
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Tightening torque of wheel studs
A. Tightening torque of bolts 140
PDM 400601-010
Securing the front differential supports Once tightened, apply yellow paint to the nuts and bolts using the special marker. A. Tightening torque of screws for front 95
B. Tightening torque of screws for rear 20
PDM 400199-530
$ V V H P E O \ R I W K H V W H H U L Q J E R [
A. Tightening torque of the splice 100
B. Tightening torque of bolts 50
PDM 400422-010
$ V V H P E O \ R I E X O N K H D G E H O R Z W X Q Q H O Once tightened, apply yellow paint to the nuts and bolts using the special marker.A. Tightening torque of screws 10
PDM 400825-073
Page 128 of 1659
26a
26b
26c
26d
L714 00 08 00
26
A
A
A
A
DESCRIPTION TIGHTENING TORQUE (Nm) PICTURE
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Tightening the lower rear suspension onto the hub carrier
A. Tightening torque of screw 110
PDM 400501-022
Assembling the steering wheel Once tightened, apply yellow paint to the nuts and bolts using the special marker. A. Tightening torque of screw 50 ± 5%
6 H F X U L Q J W K H G U L Y H U V L G H D L U E D J P R G X O H
A. Tightening torque of screw 7 ± 5%
6 H F X U L Q J W K H À D Q J H V I R U D V V H P E O L Q J W K H I X H O W D Q N V Once tightened, apply yellow paint to the nuts and bolts using the special marker.A. Tightening torque of screw 20
PDM 400201-030
Page 343 of 1659
![LAMBORGHINI GALLARDO 2009 Workshop Manual 6
L714 01 28 00
Fig.8
® Automobili Lamborghini S.p.A. / H S U R F H G X U H H O H L Q I R U P D ] L R Q L S X E E O L F D W H G L V H J X L W R V R Q R V W U H W W D P H Q](/img/62/57186/w960_57186-342.png "LAMBORGHINI GALLARDO 2009 Workshop Manual 6
L714 01 28 00
Fig.8
® Automobili Lamborghini S.p.A. / H S U R F H G X U H H O H L Q I R U P D ] L R Q L S X E E O L F D W H G L V H J X L W R V R Q R V W U H W W D P H Q")
6
L714 01 28 00
Fig.8
® Automobili Lamborghini S.p.A. / H S U R F H G X U H H O H L Q I R U P D ] L R Q L S X E E O L F D W H G L V H J X L W R V R Q R V W U H W W D P H Q W H F R Q ¿ G H Q ] L D O L H U L Y R O W H H V F O X V L Y D P H Q W H D O O D 5 H W H ' H D O H U H 6 H U Y L F H 3 R L Q W $ X W R U L ] ] D W L / D P E R U J K L Q L 7 X W W L L G L U L W W L G ¶ D X W R U H V R Q R S U R S U L H W j
G L $ X W R P R E L O L / D P E R U J K L Q L 6 S $ L Q E D V H D O O D O H J J H V X L G L U L W W L G ¶ D X W R U H 7 X W W L L F D S L W R O L 3 ' ) G L F X L V L F R P S R Q J R Q R L P D Q X D O L R I ¿ F L Q D : ( % G H V F U L W W L G L V H J X L W R V L E D V D Q R V X O O H L Q I R U P D ] L R Q L G L V S R Q L E L O L D O
P R P H Q W R G H O O D S X E E O L F D ] L R Q H & R Q U L V H U Y D G L D J J L R U Q D P H Q W R H P R G L ¿ F K H 6 R Q R Y L H W D W H O D U L V W D P S D O D U L S U R G X ] L R Q H O ¶ L Q R O W U R D S H U V R Q H Q R Q D X W R U L ] ] D W H H R D W H U ] H S H U V R Q H O D W U D G X ] L R Q H D Q F K H S D U ] L D O H
V H Q ] D O ¶ D X W R U L ] ] D ] L R Q H V F U L W W D G D S D U W H G L $ X W R P R E L O L / D P E R U J K L Q L 6 S $
0 L V ¿ U L Q J
7 R S U R F H V V G D W D W K H P L V ¿ U L Q J V \ V W H P Q R O R Q J H U X V H V W K H S U H V V X U H V H Q V R U V O L N H 0 < • W K H V \ V W H P G L U H F W O \ G H W H F W V P L V ¿ U L Q J E \ P H D Q V R I W K H À \ Z K H H O V H Q V R U V L J Q D O & $ / & 8 / $ 7 , 1 * W K H W R U T X H G H O L Y H U H G
W R W K H F D P V K D I W Z H V D \ W K H U H L V D P L V ¿ U H L I W K H D F F H O H U D W L R Q ± K H Q F H W R U T X H ± F K D Q J H V I U R P R Q H V H F W L R Q R I
phonic wheel to the next are different than expected.
There is no map of the expected torque, but the changes of delivered torque are analysed.
Accelerator pedal
The accelerator pedal arrives already factory-set. Once installed, it is the software that adapts it to the range of operation. When it is replaced, the total assembly is supplied. The pedal consists of two sensors that read the position: • W K H ¿ U V W V H Q G V W K H G D W D U H D G W R W K H P D V W H U F R Q W U R O X Q L W
• W K H V H F R Q G F K H F N V R S H U D W L R Q R I W K H ¿ U V W R Q H .
Page 413 of 1659
9
L714 01 42 00
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
: L U H V L J Q D O V
) R U W K H R S H U D W L R Q W K H ( * H D U V \ V W H P Q H H G V W K H I R O O R Z L Q J V L J Q D O V F R P L Q J I U R P V S H F L ¿ F V H Q V R U R U I U R P R W K H U Y H K L F O H system. • 6 S H F L ¿ F V H Q V R U V I R U 6 H O H V S H H G • Clutch speed sensor:
• Position sensors: clutch , gear and shift actuators
• Pressure sensor of the Selespeed hydraulic circuit
• Single Signals coming from other vehicle system.
• Engine speed (wired frequency signal, coming from engine ECU or from the dashboard )
• Brake pedal switch
• wake-up line
• Ignition key (cranking position KL_50).
& $ 1 V L J Q D O V
Other signals coming from vehicle systems via CAN network • Engine speed
• Engine Torque
• Water/Oil Engine Temperature
• Brake pedal switch
• Handbrake
• Wheels Speeds
• Sport Switch
• Accelerator Pedal (real and virtual)
• External Temperature
• Lateral Acceleration
• Steering wheel angol
• ...
Page 420 of 1659
16
L714 01 42 00
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
7 L S , Q ) X Q F W L R Q
When the driver requests a gear shift via shift paddles on steering wheel while driving in Automatic mode, the systemswitched to manual mode and the gearshift is executed. After 8 seconds the system goes back to Automatic modeif there is no addition manual gear request.
The E-Gear SW siplays on dashboard always the mode it is currently using. Tip-In mode is displayed like Manual
mode.
& X U Y H G H W H F W L R Q R Q O \ L Q $ X W R P D W L F 0 R G H
In Automatic mode (normal and sport) a curve detection function is active. This function prevent an automatic upshift when the steering wheel is turned over a threshold (at low speed) or the lateral acceleration is higher than a thre-
shold (at medium – high speed).
& O X W F K 3 U R W H F W L R Q S D F N D J H
7 Z R W H P S H U D W X U H O L P L W D U H G H ¿ Q H G • A warning limit which means, when the clutch temperature is higher, the clutch is loosing its capacity of torque
transmission and it is near to the damage limit
• A damage limit, which means, when the clutch temperature is higher, the clutch is no more able to transmit the
U H T X H V W H G W R U T X H D Q G F D Q E H G H ¿ Q L W H O \ G D P D J H G
When the clutch temperature is higher than the warning limit:• Anticipation of the automatic underspeed 2nd --> 1st (the clutch speed threshold for starting the underspeed
gear shift is higher than the normal case), in order to avoid pickup in 2nd gear.
8 V H R I D V S H F L ¿ F S L F N X S W D E O H L Q R U G H U W R U H G X F H W K H F O X W F K V O L S S K D V H
When the clutch temperature is higher than the damage limit: • Switch on the warning lamp and the message “Clutch overheated” to the driver.
• Store a DTC error code in the TCU memory if the clutch temperature remains over this limit.
Page 688 of 1659
1
L714 04 01 05
Fig.1
B
A
Fig.2
C
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
$ V V H P E O L Q J W K H I U R Q W D [ O H V K D I W
This procedure is the same for the right and left axle shafts.
1. 7 R L Q V H U W W K H D [ O H V K D I W ¿ U V W S R V L W L R Q W K H G L I I H U H Q W L D O V L G H D Q G W K H Q W K H K X E K R X V L Q J V L G H
& K H F N W K H V K R F N D E V R U E H U L V F R P S O H W H O \ G L O D W H G W R H Q V X U H W K H D [ O H V K D I W H Q W H U V W K H K R X V L Q J R Q W K H
wheel hub.
2. Fasten the lower suspension arm ( B-Fig.1 W R W K H K X E K R X V L Q J
Bolt attachment: tightening torque (000800-31a).
3. Fasten the rack joint head ( A-Fig.1 W R W K H K X E K R X V L Q J
Bolt attachment: tightening torque (000800-40d).
4. ) D V W H Q W K H F R Q Q H F W L Q J U R G R I W K H V W D E L O L ] H U E D U C-Fig.2) to the lower suspension arm.
Screw attachment: tightening torque (000800-29d).
Page 720 of 1659
1
L714 04 09 05
Fig.1
C
C
C
C
C
C
B
A
Fig.2
D
D
D
DD
D
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Assembling the front differential
Important!
3 U R F H H G Z L W K W K H X W P R V W F D X W L R Q Z K H Q D V V H P E O L Q J W K H I U R Q W G L I I H U H Q W L D O 1. Position the front differential ( A-Fig.1) using a pillar jack ( B-Fig.1).
2. Tighten the 6 screws ( C-Fig.1) securing the front differential to the chassis.
Screw attachment: tightening torque (000800-20b) .
3. Tighten the 6 screws on both sides ( D-Fig.1) securing the front differential to the axle shafts.
Screw attachment: tightening torque (000800-22a) .
• Assemble the propeller shaft (030705).
• $ V V H P E O H W K H I U R Q W F H Q W U H D Q G U H D U Y H K L F O H À R R U V (082505).
• Assemble both front wheels (060105).
Page 740 of 1659
1
L714 04 19 05
Fig.2 Fig.3
B
I
G
H
Fig.1
E
C
D
I
F
A
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
7 K H S U H V H Q W V H F W L R Q F R Q W D L Q V W K H I R O O R Z L Q J D V V H P E O \ V H T X H Q F H V
$ 6 W H H U L Q J U D F N D V V H P E O \
B) Steering column assembly
$ $ V V H P E O L Q J W K H V W H H U L Q J U D F N 1. Insert the steering rack (
A-Fig.1 ).
2. Tighten the joint heads ( B-Fig.1) on both front wheels (one ball joint for each wheel).
Bolt attachment: tightening torque (000800-40d).
3. On the right side secure the U-bolt ( C-Fig.2) using the 2 screws ( D-Fig.2) and on the left side secure the
steering rack using other 2 screws.
5 L J K W V F U H Z D W W D F K P H Q W W L J K W H Q L Q J W R U T X H G
/ H I W V F U H Z D W W D F K P H Q W W L J K W H Q L Q J W R U T X H F
4. Tighten the screw ( E-Fig.3) that secures the steering box and the steering wheel (or sleeve) and reposition the
guard (F-Fig.1).
/ H I W V F U H Z D W W D F K P H Q W W L J K W H Q L Q J W R U T X H E
5. Connect the oil delivery pipe ( G-Fig.3) and the oil return pipe ( H-Fig.3).
/ H I W V F U H Z D W W D F K P H Q W W L J K W H Q L Q J W R U T X H E
6. Secure the stabilizer bar ( I-Fig.1; I-Fig.2)
.
• $ V V H P E O H W K H I U R Q W À D W E R W W R P (082105)..
• Assemble the front wheels (060105).
Top up with oil (042308) and bleed the power steering system by turning the wheels left and right.
The car must undergo a toe-in test before returning to road use (040002).
Page 780 of 1659
2
L714 04 23 05
Fig.4
M
Fig.3
J
I
K
L
H
H
G
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
Assembling the power steering pump 1. Position the power steering pump ( G-Fig.3) in its housing.
2. 7 L J K W H Q W K H ¿ [ L Q J V F U H Z V H-Fig.3) securing the pump to the engine.
Screw attachment: tightening torque ( E).
1 R W H
If worn, replace the gasket on the delivery pipe.
3. Position the delivery pipe ( I-Fig.3) on the power steering pump and tighten the corresponding screw ( J-Fig.3).
Screw attachment: W L J K W H Q L Q J W R U T X H G
4. Install a new clamp ( K-Fig.3) on the power steering circuit return pipe ( L-Fig.3) and tighten the clamp to fasten
the pipe to the pump.
5. Tighten the screw ( M-Fig.4) fastening the power steering circuit delivery pipe clamp to the chassis.
$ I W H U D V V H P E O L Q J ¿ O O F R P S O H W H O \ Z L W K R L O V W D U W W K H H Q J L Q H D Q G P R Y H W K H V W H H U L Q J Z K H H O times to the right and left to drain the system.
• Assemble the rear left wheel .
• $ V V H P E O H W K H U H D U Y H K L F O H À R R U .
Page 804 of 1659
1
L714 05 10 05
Fig.1
BCA
E
D
® Automobili Lamborghini S.p.A. 7 K H L Q I R U P D W L R Q D Q G S U R F H G X U H V S X E O L V K H G E H O R Z D U H V W U L F W O \ F R Q ¿ G H Q W L D O D Q G H [ F O X V L Y H O \ I R U W K H / D P E R U J K L Q L ' H D O H U 1 H W Z R U N D Q G $ X W K R U L ] H G 6 H U Y L F H 3 R L Q W V $ O O F R S \ U L J K W V D U H S U R S H U W \ R I $ X W R P R E L O L
/ D P E R U J K L Q L 6 S $ E D V H G R Q F R S \ U L J K W O D Z $ O O R I W K H 3 ' ) F K D S W H U V L Q W K H : ( % Z R U N V K R S P D Q X D O V G H V F U L E H G E H O R Z D U H E D V H G R Q L Q I R U P D W L R Q D Y D L O D E O H D W W K H W L P H R I S X E O L F D W L R Q 7 K H F R P S D Q \ U H V H U Y H V
W K H U L J K W W R P D N H X S G D W H V D Q G P R G L ¿ F D W L R Q V 7 K H I R O O R Z L Q J D U H S U R K L E L W H G U H S U L Q W L Q J U H S U R G X F W L R Q I R U Z D U G L Q J W R X Q D X W K R U L ] H G S H R S O H D Q G R U W K L U G S D U W L H V D Q G W U D Q V O D W L R Q L Q F O X G L Q J S D U W L D O Z L W K R X W
Z U L W W H Q D X W K R U L ] D W L R Q I U R P $ X W R P R E L O L / D P E R U J K L Q L 6 S $
$ V V H P E O L Q J W K H U H D U V W D E L O L ] H U E D U 1. Position the stabilizer bar
(A-Fig.1 )and tighten the two mounting bolts ( B-Fig.1) using medium thread
sealant.
Fastening the bolt: tightening torque (000800-30a).
2. Assemble the connecting rod and tighten the bolt ( C-Fig.1).
Fastening the bolt: tightening torque (000800
-30b).
3. ) D V W H Q W K H À H [ L E O H V X S S R U W D-Fig.1 E \ W L J K W H Q L Q J W K H F R U U H V S R Q G L Q J V F U H Z E-Fig.1).
& K H F N W K H D V V H P E O \ G L U H F W L R Q R I W K H V W D E L O L ] H U E D U .
5 H S H D W W K H W Z R V W H S V D E R Y H R Q E R W K V L G H V U L J K W O H I W R I W K H V W D E L O L ] H U E D U
•Assemblethe silencer(025105).
• $ V V H P E O H W K H D L U ¿ O W H U D V V H P E O \ (013305)
• $ V V H P E O H W K H K H D G O L J K W V X S S R U W E U D F N H W Z L W K W K H K H D W S U R R I J X D U G (094505).
• $ V V H P E O H W K H S D Q Q H O X S S H U (081305).
•
Assemble W K H U H D U E X P S H U (080705).
•
Assemble W K H H Q J L Q H F R P S D U W P H Q W V L G H S D Q H O V (081305).
•
Assemblerear wheel arch elements (082105).
•Assemble the rear wheels (060105).