Lancia Thema 2014 Owner handbook (in English)

Cavity Cartridge Fuse Mini-Fuse Description
44 — 10 Amp Red Park Assist/Blind Spot/Camera
45 — 15 Amp Blue Cluster/Rearview Mirror/Compass/Humidity Sensor
46 — 10 Amp Red Adaptive Cruise Control
47 — 10 Amp Red Adaptive Front Lighting
48 — 20 Amp Yellow Active Suspension — If Equipped
49 — — Spare
50 — — Spare
51 — 20 Amp Yellow Front Heated Seats
52 — 10 Amp Red Heated Cupholders/Rear Heated Seat
53 — 10 Amp Red HVAC Module/In Car Temperature Sensor
54 — — Spare
55 — — Spare
56 — — Spare
57 — — Spare
58 — 10 Amp Red Airbag Module
59 — — Spare
60 — — Spare
61 — 20 Amp Yellow Trailer Tow (Europe) - If Equipped
62 — — Spare
63 — — Spare
64 — 25 Amp Natural Rear Windows
65 — 10 Amp Red Airbag Module
66 — — Spare
67 — 15 Amp Blue Frt Door Illum/Run Sense295

Cavity Cartridge Fuse Mini-Fuse Description
68 — 15 Amp Blue Console Power Outlet Illumination/Rear Sunshade
69 — — Spare
70 — — Spare
VEHICLE STORAGE
If you are leaving your vehicle dor-
mant for more than 21 days, you may
want to take these steps to protect
your battery.
1. Disconnect the negative cable
from the battery.NOTE: When the negative cable
is disconnected from the battery,
and the trunk lid is completely
closed, it is necessary to pull the
emergency release lever of the
trunk latching mechanism to open
it again. To access the trunk and
operate the lever, fold the rear
seatbacks. Please refer to “FOLD-
ING REAR SEAT” in “UNDER-
STANDING THE FEATURES OF
YOUR VEHICLE” and "TRUNK
EMERGENCY RELEASE” in
“THINGS TO KNOW BEFORE
STARTING YOUR VEHICLE” for
further information.
2. Anytime you store your vehicle, or
keep it out of service (i.e., vacation)
for two weeks or more, run the air
conditioning system at idle for about
five minutes in the fresh air and high
blower setting. This will ensure ad-
equate system lubrication to minimizethe possibility of compressor damage
when the system is started again.
REPLACEMENT BULBS
Interior Bulb Number
Rear Courtesy/Reading
Lamps ................W5W
Rear Compartment (Trunk)
Lamp ..................562
Overhead Console Reading
Lamps .................578
Visor Vanity Lamps
.......194
Glove Box Lamp (for versions/
markets, where provided) . . 194
Door Courtesy . . . ........562
Shift Indicator
Lamp ...........J KLE14140
Optional Door Map Pocket/Cup-
holder .................LED (Serviced at Authorized Dealer)
Negative Battery Cable
296

NOTE: For lighted switches, see
your authorized dealer for re-
placement instructions.
All of the interior bulbs are glass
wedge base or glass cartridge types.
Aluminum base bulbs are not ap-
proved and should not be used for
replacement.
Exterior Bulb Number
Low Beam/High Beam
(Bi-XenonHeadlamp) .....D3S(Serviced at Authorized Dealer)
Front Turn Signal
Lamp ........... PSY24WSV
FrontParkLamp ........LED (Serviced at Authorized Dealer)
Daytime Running Lamp . . . LED (Serviced at Authorized Dealer)
Front Fog Lamp (for versions/
markets, where provided) . . H11
Front Position Lamp .....LED
(Serviced at Authorized Dealer)
Front Side Marker Lamp . . LED (Serviced at Authorized Dealer)
Side Repeater Lamps .....LED
(Serviced at Authorized Dealer) Rear Tail/Stop/Side Marker
Lamp .................LED
(Serviced at Authorized Dealer)
Rear Turn Signal
Lamp ..............W Y21W
RearFogLamps .........LED (Serviced at Authorized Dealer)
BackupLamp .........W16W
Center High Mount Stop Lamp
(CHMSL) ..............LED
(Serviced at Authorized Dealer)
License ...............W5W
BULB REPLACEMENT
NOTE: Lens fogging can occur
under certain atmospheric condi-
tions. This will usually clear as at-
mospheric conditions change to
allow the condensation to change
back into a vapor. Turning the
lamps on will usually accelerate
the clearing process.
HIGH INTENSITY
DISCHARGE HEADLAMPS
(HID)
CAUTION!
Where possible, it is advisable to
have bulbs changed at a LANCIA
Dealership. Proper operation and
orientation of the external lights are
essential for driving safety and
complying with the law.
The headlamps are a type of high
voltage discharge tube. High voltage
can remain in the circuit even with the
headlamp switch off and the key re-
moved. Because of this, you should
not attempt to service a headlamp
bulb yourself. If a headlamp bulb
fails, take your vehicle to an au-
thorized dealer for service.
297

WARNING!
A transient high voltage occurs at
the bulb sockets of HID headlamps
when the headlamp switch is
turned ON. It may cause serious
electrical shock or electrocution if
not serviced properly. See your au-
thorized dealer for service.
NOTE: On vehicles equipped
with HID headlamps, when the
headlamps are turned on, there is
a blue hue to the lights. This di-
minishes and becomes more white
after approximately 10 seconds, as
the system charges.
FRONT TURN SIGNAL
LAMPS
1. Open the hood.
NOTE: Removal of the air
cleaner filter housing may be nec-
essary prior to replacing bulbs in
the headlamp assembly on the
driver side of the vehicle.
2. Remove plastic cap from the back
of the headlamp housing. 3. Squeeze the two tabs on the side of
the turn signal bulb socket and pull
straight out from the lamp.
4. Install replacement bulb and con-
nector assembly straight into the
lamp until it locks in place.
5. Reinstall plastic cap to headlamp
assembly housing.
REAR TURN SIGNAL AND
BACKUP LAMPS
1. Open the trunk.
2. Remove the trunk trim by remov-
ing the grocery hook (using a T-20
torx driver or similar tool), remove
the fastener, and pull back the
weather strip.
3. Pull back the trunk liner to gain
access to the tail lamp wing nuts.
4. Remove the three wing nuts from
the back of the tail lamp assembly.
5. Pull the tail lamp assembly away
from the vehicle enough to access the
electrical connector.
6. Push the electrical connector lock-
ing tab to the side.7. Disconnect the electrical connec-
tor.
8. Continue removing lamp from ve-
hicle in order to access the bulb(s).
9. Turn the appropriate bulb and
socket assembly counterclockwise to
remove it from the tail lamp assembly.
10. Disconnect the bulb from the
socket assembly and install the re-
placement bulb.
11. Reinstall the bulb and socket as-
sembly into the tail lamp assembly,
and then turn it clockwise.
12. Reinstall the tail lamp assembly,
fasteners, electrical connector, and
trunk trim.
13. Close the trunk.
LICENSE LAMP
1. Remove the screws securing the
lamp to the rear fascia.
2. Remove the bulb and socket as-
sembly.
298

3. Disconnect the bulb from the
socket assembly and install the re-
placement bulb.4. Reinstall the bulb and socket as-
sembly.
5. Reattach the lamp to the rear fas-
cia, and then install the screws.
FLUID CAPACITIES
Metric
Fuel (Approximate)
All Engines 72 Liters
Engine Oil with Filter
3.6 Liter Engine 5.6 Liters
3.0L Diesel Engine 8.4 Liters
Cooling System *
3.6 Liter Engine 9.5 Liters
3.0L Diesel Engine 12 Liters
* Includes heater and coolant recovery bottle filled to MAX level.
1 — License Lamp Bulb
2 — Socket
299

FLUIDS, LUBRICANTS AND GENUINE PARTS
ENGINE
ComponentFluids and Lubricants Specs (Genuine Parts)
Engine Coolant* Red protective agent with antifreeze action, based on inhibited monoethyl gly-
col with organic formula. Exceeds CUNA NC 956-16, ASTM D 3306 specifica-
tions, FIAT Classification 9.55523 (PARAFLU UP Contractual Technical Ref-
erence N° F101.M01. Cooling circuit usage percentage: 50% water 50%
PARAFLU UP **)
Engine Oil – 3.6L Engine*** SAE Grade 5W-20 fully synthetic engine oil that meets FIAT Classification
9.55535-CR1, API SN, ILSAC GF-5 (SELENIA K POWER, Contractual Tech-
nical Reference N° F042.F11)
Engine Oil – 3.0L Diesel Engine*** SAE Grade 5W-30 fully synthetic engine oil that meets FIAT Classification 9.55535–S3, API SM/CF, ACEA C3 (SELENIA MULTIPOWER C3, Contrac-
tual Technical Reference N° F129.F11)
Spark Plugs – 3.6L Engine We recommend you use OEM Original Equipment Spark Plugs (Gap 1.1 mm)
Fuel Selection – 3.6L Engine Research Octane Number (RON) of 91 or higher
Fuel Selection – 3.0L Diesel Engine This vehicle must only use premium diesel fuel that meets the requirements of EN 590. Biodiesel blends that meet EN 590 may also be used.
Fuel Additive – 3.0L Diesel Engine Additive for diesel with antifreeze and protective action for diesel engines. (TUTELA DIESEL ART, Contractual Technical Reference N° F601.L06. To be
mixed with the diesel fuel: 25 cc per 10 litres)
* Do not top up or mix with fluids
with different specifications.
** For particularly harsh climate con-
ditions, a mixture of 60% PARAFLU
UP and 40% demineralized water is
recommended. *** In the event of an emergency in
which the original products are not
available, lubricants with at least IL-
SAC GF-5 performance for petrol en-
gines and ACEA C3 performance for
diesel engines are acceptable. In this
case optimum engine performance isnot guaranteed. Using products with
specifications lower than ILSAC GF-5
for gasoline engines or lower than
ACEA C3 for Diesel engines may
cause engine damage not covered by
warranty.
300

CHASSIS
ComponentFluids and Lubricants Specs (Genuine Parts)
Automatic Transmission –
3.6L Engine Totally synthetic lubricant that meets FIAT Classification 9.55550-AV5 (TUTELA
TRANSMISSION AS8, Contractual Technical Reference N° F139.I11)
Automatic Transmission –
3.0L Diesel Engine Totally synthetic lubricant that meets FIAT Classification 9.55550-AV4 (TUTELA
TRANSMISSION FORCE4, Contractual Technical Reference N° F108.F11)
Brake Master Cylinder Synthetic fluid that meets FIAT Classification 9.55597, FMVSS n° 116, DOT 4, ISO 4925, SAE J-1704 (TUTELA TOP 4, Contractual Technical Reference N° F001.A93)
Power Steering Reservoir Totally synthetic lubricant that meets FIAT Classification 9.55550-AG3 (TUTELA GI/R, Contractual Technical Reference N° F428.H04)
Front Axle – All Wheel
Drive Only SAE Grade 75W–90 Synthetic gear lubricant that meets FIAT Classification 9.55550-
DA5, API GL-5, SAE J-2360 (TUTELA TRANSMISSION X-ROAD, Contractual Techni-
cal Reference N° F140.F11).
Rear Axle SAE Grade 75W–140 Synthetic gear lubricant that meets FIAT Classification 9.55550-
DA5, API GL-5, SAE J-2360 (TUTELA TRANSMISSION X-ROAD, Contractual Techni-
cal Reference N° F140.F11).
Transfer Case – All Wheel
Drive Only Contact a LANCIA Dealership.
Windshield/Rear Window
Washer Fluid Mixture of alcohol, water and surfactants that meets FIAT Classification 9.55522, CUNA
NC 956-11 (TUTELA PROFESSIONAL SC35, Contractual Technical Reference N°
F201.D02)
301

ARRANGEMENTS FOR
DEALING WITH THE
VEHICLE AT THE END OF
ITS LIFE
LANCIA has been committed for
many years to safeguarding the envi-
ronment through the constant im-
provement of its production processes
and manufacturing products that are
increasingly “eco-compatible”.
To give customers the best possible
service in terms of respecting environ-
mental laws and in response to Euro-
pean Directive 2000/53/EC govern-
ing vehicles at the end of their life,
LANCIA is offering its customers the
opportunity of handing over their ve-
hicle* at the end of its life without
incurring any additional costs.
The European Directive sets out that
when the vehicle is handed over the
last keeper or owner should not incur
any expenses as a result of it having a
zero or negative market value.In all European Union countries, until
1st January 2007, only vehicles regis-
tered after 1st July 2002 were col-
lected free of charge, while since 2007
collection has been free of charge irre-
spective of the year of registration as
long as the vehicle contains its basic
components (in particular, the engine
and bodywork) and has no additional
waste.
To hand your vehicle over at the end
of its life without extra cost, go to one
of our Dealerships or LANCIA-
authorized collection and scrapping
centres.
These centres have been carefully
chosen to offer high quality service for
the collection, treatment and recy-
cling of unused vehicles with respect
to the environment.
You can find further information on
these collection and scrapping centres
either from a LANCIA or LANCIA
Commercial Vehicle Dealership or by
calling the freephone number
00800 526242 00 or by going on the
LANCIA website.
(*) Vehicle for transporting passen-
gers with a maximum of nine seats
and a total permitted weight of 3.5 t
302

303

304