bulb LAND ROVER DEFENDER 1999 Workshop Manual
[x] Cancel search | Manufacturer: LAND ROVER, Model Year: 1999, Model line: DEFENDER, Model: LAND ROVER DEFENDER 1999Pages: 667, PDF Size: 8.76 MB
Page 22 of 667
04 - GENERAL SPECIFICATION DATA
CONTENTS
Page
INFORMATION
ENGINE - Td5 1......................................................................................................
FUEL SYSTEM - Td5 3...........................................................................................
COOLING SYSTEM - Td5 3....................................................................................
CLUTCH - Td5 3.....................................................................................................
TRANSMISSION - Td5 4.........................................................................................
STEERING 5...........................................................................................................
SUSPENSION 6......................................................................................................
ROAD SPRING DATA 6..........................................................................................
SHOCK ABSORBERS 7.........................................................................................
BRAKES 7...............................................................................................................
AIR CONDITIONING 8............................................................................................
WIPER MOTORS 8.................................................................................................
ELECTRICAL 8.......................................................................................................
BULBS9 .................................................................................................................
VEHICLE WEIGHTS AND PAYLOAD 10................................................................
TOWING WEIGHTS 11...........................................................................................
OFF-ROAD PERFORMANCE 11............................................................................
TYRE SIZE AND PRESSURES 12.........................................................................
WHEELS 12............................................................................................................
VEHICLE DIMENSIONS 13....................................................................................
ProCarManuals.com
Page 32 of 667
GENERAL SPECIFICATION DATA
9
INFORMATION BULBS
REPLACEMENT BULBS TYPE
Headlamps 12V 60/55W Halogen
Front side lamps 12V 5W
Side repeater lamps 12V 5W
Tail lamps 12V 21W
Cente High Mounted Stop Lamp 12V 21W
Direction indicator lamps 12V 21W
Number plate lamp 12V 4W
Reverse lamp 12V 21W
Rear fog guard lamp 12V 21W
Interior roof lamps 12V 10W
Instrument illumination 12V 1.2W
Warning light panel 12V 1.2W
Hazard warning switch 12V 1.2W
CAUTION: The fitting of new bulbs with wattages in excess of those specified will result in damage
to vehicle wiring and switches.
ProCarManuals.com
Page 487 of 667
76CHASSIS AND BODY
18
REPAIR AUXILLIARY SWITCH PANEL
Service repair no - 76.46.38
Remove
1.Remove 2 screws securing axilliary switch panel
to fascia and collect nuts and washers.
2.Disconnect multiplug from headlamp Levelling
switch.
3.Disconnect multiplug and Lucar from cigar
lighter.
4.Noting their fitted position, disconnect 4 Lucars
from rear wash wipe switch.
5.Remove switch panel.Do not carry out further dismantling if
component is removed for access only.6.Release pin securing rear wash wipe knob to
switch and remove knob.
7.Remove locknut securing rear wash wipe switch
to panel.
8.Remove rear wash wipe switch.
9.Remove knob from headlamp levelling switch.
10.Remove locknut securing headlamp switch to
panel.
11.Remove headlamp levelling switch.
12.Remove element from cigar lighter.
13.Release bulb holder from cigar lighter.
14.Release cigar lighter from tags and remove from
panel.
15.Fit cigar lighter to panel and locate tags.
16.Fit bulb holder to cigar lighter.
17.Fit element to cigar lighter.
18.Fit headlamp levelling switch to panel and
secure with locknut.
19.Fit knob to headlamp levelling switch.
20.Fit rear wash wipe switch to panel and secure
with locknut.
21.Fit knob to rear wash wipe switch, ensuring pin
is correctly located.
Refit
22.Position auxilliary switch panel to fascia and
connect 4 Lucars to rear wash wipe switch.
23.Connect multiplug and Lucar to cigar lighter.
24.Connect multiplug to headlamp levelling switch.
25.Fit auxilliary switch panel to fascia and secure
with screws.
ProCarManuals.com
Page 608 of 667
86 - ELECTRICAL
CONTENTS
Page
DESCRIPTION AND OPERATION
SECURITY AND CENTRAL DOOR LOCKING 1....................................................
SECURITY AND CENTRAL DOOR LOCKING 2....................................................
ANTI-THEFT ALARM - FROM 02MY 3...................................................................
IMMOBILISATION SYSTEM - FROM 02MY 12......................................................
CENTRAL DOOR LOCKING (CDL) - FROM 02MY 15...........................................
ANTI-THEFT ALARM SYSTEM SELF TEST 17.....................................................
FASCIA CONSOLE 18............................................................................................
HEATED FRONT SCREEN - FROM 02MY 20.......................................................
HEATED FRONT SEATS - FROM 02MY 22..........................................................
ELECTRIC FRONT WINDOWS - FROM 02MY 24.................................................
PASSENGER COMPARTMENT FUSE BOX 26.....................................................
UNDER SEAT FUSE BOX 27.................................................................................
ADJUSTMENT
HEADLAMPS - ALIGN BEAM 1..............................................................................
SOLENOID/MOTOR - FRONT DOOR - ADJUST 1................................................
REPAIR
BELT - AUXILLARY DRIVE 1.................................................................................
HARNESS - INJECTORS 1....................................................................................
STARTER MOTOR 2..............................................................................................
CENTRE HIGH MOUNTED STOP LIGHT (CHMSL) - UP TO 02MY 2...................
ALTERNATOR 3.....................................................................................................
HORN - LH 4...........................................................................................................
HEADLAMP 5.........................................................................................................
LAMP - TAIL 6.........................................................................................................
RADIO6 ..................................................................................................................
SPEAKER - FRONT 7.............................................................................................
SWITCH - TRANSMISSION BRAKE 7...................................................................
LAMP - FRONT FLASHER 8..................................................................................
BATTERY - DISCONNECT - FROM 02MY 8..........................................................
MOTOR & REGULATOR - FRONT DOOR - FROM 02MY 9..................................
SWITCH - FASCIA - FROM 02MY 10.....................................................................
HARNESS - FRONT DOOR - FROM 02MY 10.......................................................
SOLENOID/MOTOR - TAIL DOOR - FROM 02MY 11............................................
SOLENOID/MOTOR - FRONT DOOR - FROM 02MY 12.......................................
SOLENOID/MOTOR - REAR DOOR - FROM 02MY 13.........................................
HARNESS - REAR DOOR - FROM 02MY 14.........................................................
REVERSE AND FOG GUARD LAMP - BULB 15....................................................
ProCarManuals.com
Page 621 of 667
86ELECTRICAL
12
DESCRIPTION AND OPERATION IMMOBILISATION SYSTEM - FROM 02MY
Engine immobilisation is available on all 2002MY engine derivatives, although it is not available in selected
markets. On Td5 models, the immobilisation system is controlled directly by the anti-theft alarm ECU. On 300Tdi
models, the immobilisation system is controlled by an engine immobilisation ECU in conjunction with the anti-theft
alarm ECU.
When immobilisation occurs on Td5 models, engine crank is disabled by the anti-theft alarm ECU breaking the
earth path for the starter relay coil and the ECM disables the fuel pump relay and the glow plug relay.
When immobilisation occurs on 300Tdi models, engine crank is disabled by the anti-theft alarm ECU breaking the
earth path for the starter relay coil and the engine immobilisation ECU disables the fuel cut-off solenoid, the starter
motor solenoid and the glow plug relay.
Two types of immobilisation are available; passive and active.
Engine Immobilised Warning Lamp
The engine immobilised warning lamp is located in the instrument pack. The lamp is used by the anti-theft alarm
ECU to show that the engine is immobilised during an attempted engine start.
The warning lamp receives a battery supply from the ignition switch position I (aux) via the passenger
compartment fusebox. The anti-theft alarm ECU controls the warning lamp. When the warning lamp is not
required, the ECU supplies a battery supply to the warning lamp. When warning lamp operation is required, the
ECU provides an earth for the bulb.
If the ignition switch is moved to the crank position, but operation of the starter motor is prohibited and the engine
immobilised warning lamp flashes, then the anti-theft alarm ECU has not received the correct code from the
remote handset and the vehicle will remain immobilised. Ensure that the remote handset is in the proximity of the
transponder coil. If the remote handset is not available or inoperative, the immobilisation system can be disarmed
using the EKA procedure outlined later in this section.
If the ignition switch is turned to the crank position III and the remote handset is not in the proximity of the
transponder coil, engine immobilisation will remain active and the warning lamp will flash to inform the driver.
ProCarManuals.com
Page 641 of 667
86ELECTRICAL
2
REPAIR STARTER MOTOR
Service repair no - 86.60.01
Remove
1.Remove battery cover.
2.Disconnect battery negative lead.
3.Remove fixings and remove underbelly panel.
4.Disconnect Lucar from starter solenoid.
5.Remove nut and disconnect battery lead from
starter solenoid.
6.Remove nut and 2 bolts securing starter to
gearbox housing. Remove starter.
Refit
7.Clean starter motor and mating face.
8.Position starter and tighten nut and 2 bolts to27
Nm (20 lbf.ft)
9.Connect lead to starter solenoid and tighten nut.
10.Connect Lucar to starter solenoid.
11.Fit underbelly panel.
12.Reconnect battery negative lead.
13.Fit battery cover.CENTRE HIGH MOUNTED STOP LIGHT (CHMSL) -
UP TO 02MY
Service repair no - 86.41.32
Remove
1.Remove 2 screws securing lamp cover.
2.Remove lamp cover.
3.Disconnect 2 Lucars from bulb holder.
4.Remove 2 nuts securing lamp to tail door.
5.Remove lamp.
6.Collect gasket.
Refit
7.Position gasket.
8.Position lamp.
9.Secure lamp with nuts.
10.Connect Lucars to bulb holder.
11.Fit lamp cover.
12.Secure cover with screws.
ProCarManuals.com
Page 654 of 667
ELECTRICAL
15
REPAIR
7.Release multiplug from location at base of’B/C’
post and disconnect multiplug.
8.Release clip securing harness to’B/C’post.
9.Release harness sleeve and remove harness.
Refit
10.Feed harness through’B/C’post, connect and
secure multiplug.
11.Clip harness to’B/C’post and secure sleeve.
12.Connect multiplug to motor.
13.Secure harness clips and sleeve.
14.Connect check strap, fit nut and tighten
sufficiently to allow check strap to pivot without
rattling.
15.Secure plastic sheet.
16.Fit door trim casing.See CHASSIS AND
BODY, Repair.REVERSE AND FOG GUARD LAMP - BULB
Service repair no - 86.40.90
Remove
1.Remove 2 screws securing lamp to housing and
withdraw. Disconnect bayonet bulb holder from
lamp housing.
2.Remove bulb.
Refit
3.Clean bulb and holder.
4.Fit new bulb to holder.
5.Fit bulb holder to lamp.
6.Position lamp, fit and tighten screws.
ProCarManuals.com