navigation LAND ROVER FREELANDER 2001 Workshop Manual

CONTENTS
22 CONTENTS
NAVIGATION SYSTEM ............................................................................ 87-1
REPAIRS
Interface unit - remote control ........................................................................................................ 87-1
Display unit - navigation system .................................................................................................... 87-1
INSTRUMENTS ......................................................................................... 88-1
REPAIRS
Clock .............................................................................................................................................. 88-1
Instrument panel - up to 04MY ....................................................................................................... 88-2
Instrument panel - from 04MY ........................................................................................................ 88-3
Cowl - instrument - up to 04MY ...................................................................................................... 88-4
Cowl - instrument - from 04MY ....................................................................................................... 88-5
Sender unit - fuel tank gauge.......................................................................................................... 88-6
Sender unit assembly - fuel tank - Td4 models - from 03MY.......................................................... 88-6

NAVIGATION SYSTEM
REPAIRS 87-1
NAVIGATION SYST EM REPAIRS
Interface unit - remote control
$% 86.53.15
Remove
1.Remove front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.
2.Release interface ECU from bracket,
disconnect multiplug and remove ECU.
Refit
1.Secure interface ECU in bracket and connect
multiplug.
2.Fit front console.

+ INTERIOR TRIM COMPONENTS,
REPAIRS, Console - front - up to 04MY.
Display unit - navigation system
$% 86.53.20
Remove
1.Fit tool LRT-86-009 into slots, ensuring correct
handed tool is in correct slot.
The tools are stamped with 'TOP L' and 'TOP
R', ensure the stampings are facing upwards
when removing the unit.
2.Pull unit from fascia.
3.Disconnect 3 multiplugs and 2 coax cables,
remove unit.
4.Push retaining clips inwards and remove keys.
Refit
1.Position unit to fascia, connect multiplugs and
coax cables.
2.Slide unit in fascia until retaining clips engage.
3.Enter security code, check system is
operational.
M86 5745
M86 5741