CD player Lexus CT200h 2012 (in English) Owner's Guide

393
3-3. Using the Bluetooth® audio system
3
Interior features
CT200h_OM_OM76067E_(EE)
CAUTION
Caution while driving
Do not connect portable players or operate the controls.
Caution regarding interference with electronic devices
An antenna for the Bluetooth® connection is built in the instrument panel.
People with implanted pacemakers or cardiac defibrillators should main-
tain a reasonable distance between themselves and the Bluetooth
® anten-
nas. The radio waves may affect the operation of such devices.
Before using portable players, users of any electrical medical device other
than implanted pacemakers and implanted cardiac defibrillators should
consult the manufacturer of the device for information about its operation
under the influence of radio waves. Radio waves could have unexpected
effects on the operation of such medical devices.
NOTICE
To prevent damage to portable players
Do not leave portable players in the vehicle. The temperature inside the
vehicle may become high, resulting in damage to the player.

396
3-3. Using the Bluetooth® audio system
CT200h_OM_OM76067E_(EE)
Using the Bluetooth® audio system for the first time
Before using the Bluetooth
® audio system, it is necessary to regis-
ter a Bluetooth® enabled portable player in the system. Follow the
procedure below to register (pair) a portable player:
Press
(type A) or (type B) and select “BTA
MENU” using .
Press the talk switch or select “BTA Setup” using .
The introductory guidance and portable player name registration
instructions are heard.
Select “Pair Audio Player (Pair Audio)” using a voice com-
mand or .
Register a portable player name by either of the following
methods:
a. Select “Record Name” using , and say the name
to be registered.
b. Press the talk switch and say the name to be registered.
A voice guidance instruction to confirm the input is heard.STEP1
STEP2
STEP3
STEP4

397
3-3. Using the Bluetooth® audio system
3
Interior features
CT200h_OM_OM76067E_(EE)Select “Confirm” using a voice command or .
A passkey is displayed and heard, and a voice guidance instruction
for inputting the passkey into the portable player is heard.
Input the passkey into the portable player.
Refer to the manual that comes with the portable player for the
operation of the portable player.
Guidance for registration completion is heard.
If the portable player has a Bluetooth
® phone, the phone can be
registered at the same time. A voice guidance instruction to regis-
ter a Bluetooth
® phone is heard.
Select “Yes” or “No” using a voice command or .
(Bluetooth
® phone P. 413)
STEP5
STEP6
STEP7

398
3-3. Using the Bluetooth® audio system
CT200h_OM_OM76067E_(EE)
Menu list of the Bluetooth® audio system
First menuSecond
menuThird menuOperation detail
“BTA
MENU”“BTA
Setup”
“Pair Audio”Registering a portable audio
player
“Select Audio”Selecting a portable audio
player to be used
“Change Name”Changing the registered
name of a portable player
“List Audios”Listing the registered porta-
ble players
“Set Passkey”Changing the passkey
“Delete Audio”Deleting a registered porta-
ble player
Operations that cannot be performed while driving
Operating the system with
Registering a portable player to the system
Changing the passkey
P. 4 0 6

399
3-3. Using the Bluetooth® audio system
3
Interior features
CT200h_OM_OM76067E_(EE)
Operating a Bluetooth® enabled portable player
Type A
Displaying
text message
Selecting a track Random
playback
Powe Volume
Repeat playPlayback/pause
Play back
Selecting an album
BTA menu
knob

402
3-3. Using the Bluetooth® audio system
CT200h_OM_OM76067E_(EE)
Scanning tracks
Press .
To cancel, press again.
Switching the display
Press .
Each time the button is pressed, the display changes in the following
order: Elapsed time  Album title  Track title  Artist name
Using the steering wheel audio switches
P. 385
Bluetooth® audio system functions
Depending on the portable player that is connected to the system, certain
functions may not be available.
Display
P. 3 4 6
Error messages
“Memory Error”: This indicates a problem in the system.

403
3-3. Using the Bluetooth® audio system
3
Interior features
CT200h_OM_OM76067E_(EE)
Setting up a Bluetooth® enabled portable player
Registering a portable audio player in the Bluetooth® audio system
allows the system to function. The following functions can be used for
registered portable players:
Functions and operation procedures
To enter the menu for each function, follow the steps below.
Press
(type A) or (type B) and select “BTA
MENU” using or press the off-hook switch (P.
419) and select “Setup” using .
Select “BTA Setup” using .
Select one of the following items using :
Registering a portable player
“Pair Audio”
Selecting a portable player to be used
“Select Audio”
Changing the registered name of a portable player
“Change Name”STEP1
STEP2
STEP3

404
3-3. Using the Bluetooth® audio system
CT200h_OM_OM76067E_(EE)
Registering a portable player
Select “Pair Audio” using , and perform the procedure for
registering a portable player. (P. 396)
Selecting a portable player to be used
Select “Select Audio” using .
Select the portable player to be used using .
Select “From Car” or “From Audio” using .
If “From Car” is selected, the portable player will be automati-
cally connected whenever:
The “POWER” switch is in ACCESSORY or ON mode.
Listing the registered portable players
“List Audios”
Changing the passkey
“Set Passkey”
Deleting a registered portable player
“Delete Audio”
STEP1
STEP2
STEP3

405
3-3. Using the Bluetooth® audio system
3
Interior features
CT200h_OM_OM76067E_(EE)
Changing the registered name of a portable player
Select “Change Name” using .
Select the desired portable player name to be changed using
.
Select “Record Name” using , and say the new
name after the beep.
The name to be registered will be repeated aloud.
Select “Confirm” using .
STEP1
STEP2
STEP3
STEP4

406
3-3. Using the Bluetooth® audio system
CT200h_OM_OM76067E_(EE)
Listing the registered portable players
Select “List Audios” using . The list of registered portable
players will be read aloud.
When listing is complete, the system returns to “BTA Setup”.
Changing the passkey
Select “Set Passkey” using .
Select a 4 to 8-digit number using .
The number should be input 1 digit at a time.
When the entire number to be registered as a passkey has
been input, press again.
If the number to be registered has 8 digits, pressing of the knob is
not necessary.
STEP1
STEP2
STEP3