AIR CONDITIONING AND AUDIO
99 (d) Selecting a program
Automatic program selection: Use for direct access to a
desired program.
Push the
(TRACK) button on either side and hold it
until the desired program number appears on the display. As
you release the button, the player will start playing the selected
program from the beginning.
Manual program selection:
Push either of the
(FAST) buttons and hold it to fast
forward or reverse the disc: Releasing the button starts the
play from that position.
Disc scan selection: Use for disc-to-disc scanning.
Push the
(SCAN) button. With “SCAN” on the display, the
program at the beginning of each disc will be played for 10
seconds. To continue listening to the program of your choice,
push the
(CD) or (SCAN) button.
(e) Other compact disc player functions
“RPT” button: Use for automatic repeat of the program
currently being listened to.
Push the
(RPT) button on the left side while the
program is being played. As this is done, “RPT” will appear on
the display. When the program is finished, the disc will
automatically go back to the beginning of the program and the
program will be played again. To cancel it, push the button
once again.“RANDOM” button: Use for automatic program selection and
play the system.
Where the
(RANDOM) button is pushed on the right
side, “RND” appears on the display and the system selects a
program on the disc which is set and plays it. To cancel it, push
the button once again.
When a program is skipped or the system is inoperative, push
the
(CD) button to reset.
“CD CMP” button: Use for listening to music in noisy
situations.
Push the
(CD CMP) button and hold it until a beep is
heard “CMP” appears on the display. Small sounds are
emphasized and large sounds muted slightly so that every
sound can be heard clearly.
This function works only in the “CD” mode. To cancel it, push
the button once again and hold it until a beep is heard.
(f) If the player malfunctions
If “WAIT” appears on the display, audio signals of the disc
cannot be read or the system has trouble. Push the
(CD)
button once again.
If the player does not operate, check that the disc surface is not
soiled or damaged. If the disc is O.K., the following two causes
are possible.
Condensation may have occurred on the internal
mechanism of the player.
Open the trunk to let air circulate.
AIR CONDITIONING AND AUDIO
100The temperature of the player’s internal mechanism is
raised because of high external temperature.
Remove the magazine from the player to cool it.
If the player still does not operate, take it to your Lexus dealer.
Compact disc player operating tips
Use only compact discs labeled as shown, having no dirt,
damage or warp. Lexus does not recommend using 8 cm
(3.2 in.) discs.Never attempt to disassemble or oil any part of the player
unit. Do not insert any object other than a disc into the
slot.
There are no user-serviceable parts inside the compact disc
player.A new disc may have rough edges on its inner and outer
perimeter. Remove the rough edges by pressing the side
of a ball-point pen or pencil against the inner and outer
perimeter of the disc as shown.
If you continue to play a disc with rough edges, flakes will fall
on to the signal side of the disc and cause sound skipping or
other problems.
AIR CONDITIONING AND AUDIO
101
Correct
Wrong
Do not put any fingerprints, stickers or pen marks on the
surfaces of the disc.
Hold the disc only by the edge or center hole.
When not in use, take the disc out of the player, put it back
into its case and store it away from dust, heat, damp and
direct sunlight.
Leaving discs on the dashboard in the sun may damage or
warp them.If the disc gets dirty, wipe it clean with a soft cloth, wiping
radially out from the center.
Do not use a conventional record cleaner or anti-static record
preservative.
CAUTION:
Compact disc players use invisible laser beams which
could cause hazardous radiation exposure if directed
outside the unit. Be sure to operate the player correctly as
instructed.
