clock Lexus ES300 1994 Chassis

CHASSIS
187
CHECKING POWER STEERING
FLUID
Check the fluid level through the reservoir. If necessary,
add automatic transmission fluid DEXRON®-II.
If the vehicle has been driven around 80 km / h (50 mph) for 20
minutes (a little more in frigid temperatures), the fluid is hot
(60
C − 80
C or 140
F − 175
F). You may also check the level
when the fluid is cold (about room temperature. 10
C − 30
C
or 50
F − 85
F) if the engine has not been run for about five
hours.
If hot O.K.
If hot add
If cold O.K.
If cold add
Clean all dirt off the reservoir and look at the fluid level. If the fluid
is cold, the level should be in the “COLD” range. Similarly, if it is
hot, the fluid level should be in the “HOT” range. If the level is at
the low side of the appropriate range, add automatic transmission
fluid DFXRON
®-II to bring the level within the range.
To remove the filler cap, turn it counterclockwise and lift up. To
reinstall it, turn it clockwise. After replacing the filler cap,
visually check the steering box case, vane pump and hose
connections for leaks or damage.
CAUTION:
The reservoir may be hot so be careful not to burn
yourself.
NOTICE:
Avoid overfilling, or the power steering could be
damaged.