washer fluid Lexus ES300 1994 Electrical Components

SECTION 6 – 4
197
SERVICE PROCEDURES AND
SPECIFICATIONS
Electrical components
Specifications198 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking battery condition
202 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery recharging precautions
204 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking and replacing the blade type fuses
204 . . . . . . . . . . . . . . . .
Checking the cartridge type fuses206 . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the windshield wiper blades207 . . . . . . . . . . . . . . . . . . . . . .
Adding washer fluid210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Checking the headlight aim210 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing light bulbs211 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ELECTRICAL COMPONENTS
Beam angle gauge
(vertical movement)
Beam angle gauge
(horizontal movement)
210
ADDING WASHER FLUID
If the washer tank becomes nearly empty, add washer
fluid.
You may use plain water as washer fluid. However, in cold
areas where temperatures range below the freezing point, use
washer fluid containing antifreeze. This product is available at
your Lexus dealer and most auto parts stores. Follow the
manufacturer’s directions on how much to mix with water.
NOTICE:
Do not use engine antifreeze or any other substitute
because it may damage your vehicle’s paint.
CHECKING THE HEADLIGHT AIM
Before checking the headlight aim:
1. Be sure that the body around the headlight is not deformed.
2. Park the vehicle on a level spot.
3. The driver gets into the driver’s seat and puts the vehicle in
a state readying for a driving (with a full tank).
4. Bounce the vehicle several times.