recommended oil Lexus ES300 1995 Engine

ENGINE
Temperature range anticipated before next oil change
5W-30 Preferred
10W-30
168
SPECIFICATIONS
− GENERAL
Model
Type
Bore and stroke
Displacement
Valve clearance (engine cold)
Intake
Exhaust
Drive belt tension (with Borroughs drive belt tension gauge
No. BT-33-73F)
1MZ-FE
6 cylinder V type, 4 cycle, gasoline
87.5 x 83 mm (3.44 x 3.27 in.)
2995 cm
3 (182.7 cu.in.)
0.15 − 0.25 mm (0.006 − 0.010 in.)
0.25 − 0.35 mm (0.010 − 0.014 in.)
115 ± 20 lb.
− LUBRICATION SYSTEM
Oil capacity
Drain and refill
with filter
without filter
Oil grade
Recommended oil viscosity (SAE):
4.7 L (5.0 qt., 4.1 Imp.qt.)
4.5 L (4.8 qt., 4.0 Imp.qt.)
API SH, Energy-Conserving II multigrade engine oil or
ILSAC multigrade engine oil

ENGINE
174Remove the oil filler cap and add engine oil a little at a time,
checking the dipstick. The approximate quantity of oil needed
to fill between the low line and the full line on the dipstick is
indicated below for reference.
When the level reaches within the correct range, return the
filler cap and turn the cap clockwise until you hear a click.
Oil quantity. L (qt., Imp. qt.) 1.5 (1.6, 1.3)
NOTICE:
Avoid overfilling, or the engine could be damaged.
Check the oil level on the dipstick once again after
adding the oil.
Engine oil selection
Use API SH, Energy-Conserving II multigrade engine oil or
ILSAC multigrade engine oil. Recommended viscosity is as
follows with SAE 5W-30 being the preferred engine oil for your
vehicle.
Recommended viscosity (SAE):
Temperature range anticipated before next oil change
5W-30 Preferred
10W-30
If you use SAE 10W-30 engine oil in extremely low
temperatures, the engine may become difficult to start, so
SAE 5W-30 engine oil is recommended.