air condition Lexus ES300 1997 In Case Of An Emergency: In Case Of An Emergency

IN CASE OF AN EMERGENCY
165
CAUTION!
When making the connections, to avoid serious
injury, do not lean over the battery or accidentally let
he jumper cables or clamps touch anything except
the correct battery terminals or the ground.
5. Start your engine in the normal way. After starting, run
it at about 2000 rpm for several minutes with the accelerator
pedal lightly depressed.
6. Carefully disconnect the cables in the exact reverse
order: the negative cable and then the positive cable.
7. Carefully dispose of the battery cover cloths which may
now contain sulfuric acid.
8. If removed, replace all the battery vent plugs.
If the cause of your battery discharging is not apparent (for
example, lights left on), you should have it checked.
IF YOUR VEHICLE OVERHEATS
If your engine coolant temperature gauge indicates
overheating, if you experience a loss of power, or if you
hear a loud knocking or pinging noise, the engine has
probably overheated. You should follow this
procedure...
1. Pull safely off the road, stop the vehicle and turn on your
emergency flashers. Put the transmission in ªPº and apply
the parking brake. Turn off the air conditioning if it is being
used.
2. If coolant or steam is boiling out of the radiator or
reservoir, stop the engine. Wait until the steam subsides
before opening the hood. If there is no coolant boiling over
or steam, leave the engine running. and make sure the
engine cooling fan is operating. If it is not, turn the ignition off
.
CAUTION!
To help avoid personal injury, keep the hood closed
until there is no steam. Escaping steam or coolant
is a sign of very high pressure.
3. Look for obvious coolant leaks from the radiator, hoses,
and under the vehicle. However, note that water draining
from the air conditioning is normal if it has been in use.
CAUTION!
When the engine is running, keep hands and
clothing away from the moving fan and engine drive
belts.

IN CASE OF AN EMERGENCY
17210. After changing the wheel, check the air pressure of
the replaced tire. Stow all the tools, jack and flat tire
securely.
If the pressure of the replaced tire is low, drive slowly to the
nearest service station and fill to the correct pressure.
Do not forget to reinstall the tire valve cap as dirt and
moisture could get into the valve core and possible cause air
leakage. If the cap is missing, put a new one on as soon as
possible.
This is the same procedure for changing or rotating your
tires.
CAUTION!
Before driving, make sure all the tools, jack and flat
tire are securely in place in their storage location to
reduce the possibility of personal injury during a
collision or sudden braking.
IF YOUR VEHICLE NEEDS TO BE
TOWED
If towing is necessary, we recommend you to have it
done by your Lexus dealer or a commercial tow truck
service. In consultation with them, have your vehicle
towed using either (a) or (b).
(a) Towing with a wheel lift type truck
(b) Using a flat bed truck
(c) Never tow with a sling type truck
Only when you cannot receive a towing service from a
Lexus dealer or commercial tow truck service, tow your
vehicle carefully in accordance with the instructions
given in ª(d) Emergency towingº on page 176.
Proper equipment will help ensure that your vehicle is not
damaged while being towed. Commercial operators are
generally aware of the state/provincial and local laws
pertaining to towing.
Your vehicle can be damaged if it is towed incorrectly.
Although most operators know the correct procedure, it is
possible to make a mistake. To avoid damage to your
vehicle, make sure the following few precautions are
observed. If necessary, show this page to the tow truck
driver.
TOWING PRECAUTIONS:
Use a safety chain system for all towing, and abide by the
state/provincial and local laws. The wheels and axle on the
ground must be in good condition. If they are damaged, use
a towing dolly.