lock Lexus ES300 1997 Service Procedures And Specifications: Chassis

CHASSIS
209
CHECKING POWER STEERING
FLUID
Check the fluid level on the dipstick. If necessary, add
automatic transmission fluid DEXRON)II or III.
If the vehicle has been driven around 80 km/h (50 mph) for
20 minutes (a little more in frigid temperatures), the fluid is
hot (605C±805C or 1405F±1755F). You may also check the
level when the fluid is cold (about room temperature,
105C±305C or 505F±855F) if the engine has not been run for
about five hours.

If hot O.K. If hot add If cold O.K.
 If cold add
Clean all dirt off the ressevior and lok at the fluid level. If the
fluid is cold, the level should be in the ªCOLDº range.
Similarly, if it is hot, the fluid level should be in the ªHOTº
range. If the level is at the low side of the appropriate range,
add automatic transmission fluid DEXRON
)II or III to bring
the level within the range.
To remove the filler cap, turn it counterclockwise and lift it up.
To reinstall it, turn it clockwise. After replacing the filler cap,
visually check the steering box case, vane pump and hose
connections for leaks or damage.
CAUTION!
The reservoir may be hot so be careful not to burn
yourself.

CHASSIS
215
CAUTION!
Do not exceed 50 km/h (30 mph) or the chain
manufacturer 's recommended speed limit,
whichever is lower.
Drive carefully avoiding bumps, holes, and sharp
turns, which may cause the vehicle to bounce.
Avoid sharp turns or locked±wheel braking, as
use of chains may adversely affect vehicle
handling.
REPLACING WHEELS
When to replace your wheels
If you have wheel damage such as bends, cracks or
heavy corrosion, the wheel should be replaced.
If you fail to replace damaged wheels, a tire may slip off a
wheel or they may cause loss of handling control.
Replacement with used wheels is not recommended as they
may have been subjected to rough treatment or high mileage
and could fail without warning. Also, bent wheels which ahve
been straightened may have hidden structural damage and
therefore should not be used. Never use an inner tube in a
leaking wheel which is designed for a tubeless tire.
Wheel selection
When replacing wheels, care should be taken to ensure
that they are equivalent to those removed in load
capacity, diameter, rim width, and offset.
Correct replacement wheels are available at your Lexus
dealer.
A wheel of a different size or type may adversely affect
handling, wheel and bearing life, brake cooling,
speedometer/odometer calibration, stopping ability,
headlight aim, bumper height, vehicle ground clearance, and
tire or snow chain clearance to the body and chassis.