seat memory Lexus ES300 2000 Owner's Manuals (in English)
[x] Cancel search | Manufacturer: LEXUS, Model Year: 2000, Model line: ES300, Model: Lexus ES300 2000Pages: 501
Page 18 of 501
PE030
PICTORIAL INDEX
xvii
SEAT AND STEERING WHEEL
Page
1 Tilt steering adjustment lever 125 . . . . . . . . . . . . . . .
2 Driving position memory
switch 199 . . . . . . . . . . . . . .
3 Seat position, seat
cushion angle and height control switch 117 . . . . . . . . . . . . . .
4 Seatback angle control
switch 118 . . . . . . . . . . . . . .
5 Lumbar support control
switch 120 . . . . . . . . . . . . . .
For detailed information, refer to the description givenin each section.
Page 133 of 501
SECTION 1 ± 6
11 3
INSTRUMENTS AND CONTROLS
Comfort adjustment
Front seats113
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Trunk storage extension 120
. . . . . . . . . . . . . . . . . . . . . . .
Head restraints 122
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tilt steering wheel 125
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Outside rear view mirrors 126
. . . . . . . . . . . . . . . . . . . . . .
Inside rear view mirror 130
. . . . . . . . . . . . . . . . . . . . . . . . .
Seat belts 132
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supplemental restraint system (SRS) 148
. . . . . . . . . . . .
Child restraint 172
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Driving position memory system 199
. . . . . . . . . . . . . . . .
FRONT SEATS
Front seat precautions
Page 219 of 501
COMFORT ADJUSTMENT
199
DRIVING POSITION MEMORYSYSTEM
The micro computer can memorize the positions of the
driver's seat and outside rear view mirrors. Two dif ferent
driving position profiles can be entered into the
computer's memory.
Recording a driving position in the computer's memory
can only be done when the ignition key is in the ªONº
position and the selector lever is in the ªPº position.
Setting a driving position
16E047
Page 220 of 501
COMFORT ADJUSTMENT
2001. Adjust the driver's seat and outside rear view
mirrors to the desired position.
2. While
pushing the ªSETº button, push button ª1º
or ª2º until the signal beeps.
The beep sound means that the positions are recorded
in the computer's memory. By repeating these two steps and pressing the
remaining button, the driving position for another driver
can be recorded.
To set a new memorized position, select the desired
position and perform step 2. The previous memory will
be erased and the new position will be set.
To make only slight changes to an already memorized
position, the easiest way is to first activate the
memorized position, then make the desired changes
and perform step 2 above.
Page 222 of 501
COMFORT ADJUSTMENT
202Conditions for memorized position activation
Ignition key ªONº and selector lever in ªPº position
All parts of the memorized positions can be activated.
However, if the brake pedal is being depressed, the
seat position will not change.
Key not in ignition switch and within 30 seconds of
opening driver's door.
The memorized position can be activated.
If any driving position memory switch is pushed while
one of the memorized driving position profiles is being
activated, the operation will stop.
To activate the system, push the desired button (ª1º or
ª2º) again.
The driving position memory control system cannot be
operated while the vehicle is moving.
If the vehicle's battery is disconnected, the computer's
memory will be erased and the memorized positions will
have to be set again.
Page 223 of 501
COMFORT ADJUSTMENT
203
CAUTION
Do not start the vehicle while the adjustments are
being made.
Take care not to select the wrong button, or the seat
could strike the rear passenger or hit your body
against the steering wheel. If this happens, you can
stop the movement by pressing another driving
position memory switch, or depressing the brake
pedal.