steering Lexus ES300h 2014 Navigation Manual

171
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Reply messages can be edited while the
vehicle is parked. Select “Edit”.
2Select the screen bu tton corresponding
to the desired message.
3Select “OK” when editing is completed.
4Select .
1Select “Read” to check the message.
zThe “Messages” screen will be displayed.
z When “Automatic Message Readout” is
set to “On”, the message will be automati-
cally read out. (See “MESSAGE SET-
TINGS” on page 187.)
EDITING REPLY MESSAGESNEW MESSAGE
NOTIFICATION
If “New Message Pop-up” and “New
Message Voice Notification” are set to
“On” , a notification appears on the
screen and a voice notification will be
heard when a new message arrives.
(See “MESSAGE SETTINGS” on page
187.)
z For SMS/MMS, selecting or
pressing the switch on the steering
wheel calls the sender. (See page 164.)
z To check the message later, select
“Ignore” or .

175
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
■THE “Contacts” SCREEN CAN
ALSO BE DISPLAYED
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select “Options” .
4Select “Manage Contacts” .
■TRANSFERRING A PHONE NUM-
BER
X For PBAP compatible Bluetooth®
phones
1Select “Transfer Contacts” .
2Select “Update Contacts” .
The phone numbers in a Bluetooth®
phone can be transferred to the system.
The system can manage up to 5 phone-
books. Up to 1000 contacts (maximum
of 3 numbers per contact) can be regis-
tered in each phonebook.
Operation methods differ between
PBAP compatible and PBAP incompat-
ible but OPP compatible Bluetooth
®
phones.
If your cellular phone is neither PBAP
nor OPP compatible, the phonebook
cannot be transferred.

178
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
XFrom “Contacts” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select “Transfer” .
4This screen is displayed. The following
operations are performed in the same
manner as when they are performed
from the “Setup” screen.
■REGISTERING THE PHONE-
BOOK DATA
1Select “New Contact” .
2Use the software keyboard to input the
name and select “OK” .
3Input the phone number and select
“OK”.
zTo use a tone signal after the phone num-
ber, input the tone signal too.
Phonebooks of PBAP incompatible but
OPP compatible phones can also be
transferred from the “Contacts” screen.
The phonebook data can be registered.
Up to 3 numbers per person can be reg-
istered. New phonebook data cannot be
added for PBAP compatible
Bluetooth
® phones.

180
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■THE “Edit Contact” SCREEN CAN
ALSO BE DISPLAYED
X From the “Contact” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select the desired da ta from the list on
the “Contacts” screen.
4Select “Options” .
5Select “Edit”. X
From the “Call History” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Call History” on the “Phone”
screen.
3Select the desired number from the list
on the “Call History” screen.
4Select “Add to Contacts” or “Update
Contact” .
5If “Update Contact” has been selected,
this screen will be displayed. Select the
desired data from the list.

181
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
■DELETING THE PHONEBOOK
DATA
1Select “Delete Contacts” .
2Select the desired data or “Select All”,
then select “Delete”.
zMultiple data can be selected and deleted
at the same time.
3Select “Yes”.
■ALTERNATIVE PHONEBOOK
DATA DELETION METHOD
X PBAP incompatible but OPP compatible
models
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select the desired da ta from the list on
the “Contacts” screen.
4Select “Options” .
5Select “Delete”.
6Select “Yes”.
The data can be deleted.
When selling or disposing of the vehicle,
delete all your data on the system.
For PBAP compatible phones, delete
the phonebook data after setting “A u t o -
matically Download Contacts” to
“Off” . (See “PBAP compatible models
automatic data transfer setting” on page
176.)
INFORMATION
●
When a Bluetooth® phone is deleted, the
phonebook data will be deleted at the
same time.

182
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1Press the “MENU” button on the
Remote Touch, then select “Setup”.
2Select “Phone” on the “Setup” screen.
3Select “Phonebook” on the “Phone Set-
tings” screen.
4Select “Manage Speed Dials” .
5Perform each setting according to the
procedures outlined on the following
pages.
■THE “Speed Dials” SCREEN CAN
ALSO BE DISPLAYED
X From the “Speed Dial” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Speed Dials” on the “Phone”
screen.
3Select “Options” .
X From the “Contacts” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select “Options” .
SPEED DIALS SETTING
Speed dials can be registered and delet-
ed.

184
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
■THE SPEED DIAL CAN ALSO BE
REGISTERED
X From the “Speed Dial” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Speed Dials” on the “Phone”
screen.
3Select “(add new)” .
4Select “Yes” to set new speed dial.
5Select the desired data to be registered.
6Select the desired phone number.
X From the “Contact” screen
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Contacts” on the “Phone”
screen.
3Select the desired data from the list on
the “Contacts” screen.
4Select “Options” .
5Select “Set Speed Dial” .

186
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6Select the desired data, or to delete all
the data select “Select All”, then select
“Delete”.
z Multiple data can be selected and deleted
at the same time.
7Select “Yes”.
■THE CALL HISTORY CAN ALSO
BE DELETED
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Call History” on the “Phone”
screen.
3Select “Delete”.
4This screen is displayed.
zThe following operations are performed in
the same manner as when they are per-
formed from the “Setup” screen.
z Other call history can be operated simi-
larly.
X Deleting after call hi story has been dis-
played
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Call History” on the “Phone”
screen.
3Select the desired hi story to be deleted.

187
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
4Select “Delete” .
5Select “Yes”.
1Press the “MENU” button on the
Remote Touch. (See “Remote Touch”
on page 10.)
2Select “Setup” on the “Menu” screen.
3Select “Phone” on the “Setup” screen.
4Select “Messaging Settings” .
5Perform each setting according to the
procedures outlined on the following
pages.
6Select “Save” when each setting is com-
pleted.
1Press the “MENU” button on the
Remote Touch, then select “Phone”.
zThe “Phone” screen can be displayed by
pressing
on the steering wheel.
2Select “Messages” on the “Phone”
screen.
3Select “Options” .
MESSAGE SETTINGS
Message settings can be changed.THE “Messaging Settings”
SCREEN CAN ALSO BE
DISPLAYED

193
2. SETUP
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
4
PHONE
2Select “Full Screen” or “Drop Down” .
3Select “Save”.
1Select “Rotate Contact Images” .
2Select the desired orientation of the im-
age to be displayed.
3Select “Save”.
1Select “Default” .
2Select “Yes”.
Screen buttonFunction
“Full Screen”
When a call is received,
the hands-free screen is
displayed and it can be
operated on the screen.
“Drop Down”
The message is displayed
on the upper side of the
screen and it can only be
operated via the steering
wheel switches.
ROTATING CONTACT
IMAGES
For PBAP compatible models, when
“Contact Image for Incoming Calls” is
set to “On”, images stored together with
phone numbers in the cellular phone’s
phonebook will be transferred and dis-
played during the incoming call. The ori-
entation of the image can be set.
INITIALIZING THE SETTINGS
The settings can be initialized.