instrument panel Lexus ES300h 2014 Navigation Manual

139
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
3
NAVIGATION SYSTEM
5. GPS (GLOBAL POSITIONING SYSTEM)
1. LIMITATIONS OF THE NAVIGATION SYSTEM
The Global Positioning System (GPS) de-
veloped and operated by the U.S. Depart-
ment of Defense provides an accurate
current position, normally using 4 or more
satellites, and in some case 3 satellites. The
GPS system has a certain level of inaccura-
cy. While the navigation system will com-
pensate for this most of the time, occasional
positioning errors of up to 300 ft. (100 m)
can and should be expected. Generally, po-
sition errors will be corrected within a few
seconds. When the vehicle is receiving signals from
satellites, the “GPS” mark appears at the
top left of the screen.
The GPS signal may be physically obstruct-
ed, leading to inaccurate vehicle position on
the map screen. Tunnel
s, tall buildings,
trucks, or even the pl acement of objects on
the instrument panel may obstruct the GPS
signals.
The GPS satellites may not send signals due
to repairs or improvements being made to
them.
Even when the navigation system is receiv-
ing clear GPS signals, the vehicle position
may not be shown accurately or inappropri-
ate route guidance may occur in some cas-
es.
This navigation system calculates the
current position using satellite signals,
various vehicle signals, map data, etc.
However, an accurate position may not
be shown depending on satellite condi-
tions, road configuration, vehicle condi-
tion or other circumstances.
NOTICE
●The installation of window tinting may
obstruct the GPS signals. Most window
tinting contains some metallic content
that will interfere with GPS signal recep-
tion of the antenna in the instrument
panel. We advise against the use of win-
dow tinting on vehicles equipped with
navigation systems.

145
1. PHONE OPERATION
4
PHONE
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
No.NameFunction
The condition
of Bluetooth®
connection
No connection Good
An antenna for the Bluetooth® connection is built in the instrument
panel. The conditio n of the Bluetooth® connection may deteriorate
and the system may not function when a Bluetooth® phone is used in
the following conditions and/or places:
• The cellular phone is obstructed by certain objects (such as when
it is behind the seat or in the glove box and console box).
• The cellular phone touches or is covered with metal materials.
Leave the Bluetooth
® phone in a place where the condition of the
Bluetooth® connection is good.
When the cellular phone is not connected, “No Connect” is dis-
played.
The amount of
battery charge
leftEmpty Full
This is not displayed when the Bluetooth® is not connected.
The amount displayed does not al ways correspond with the amount
displayed on the cellular phone. Th e amount of battery charge left
may not be displayed depending on the type of phone you have. This
system does not have a charging function.
The receiving
area“Rm” is displayed when receiving in a roaming area.
The receiving area may not be displayed depending on the type of
phone you have.
The level of
receptionPoor Excellent
The level of reception does not alwa ys correspond with the level dis-
played on the cellular phone. The level of reception may not be dis-
played depending on the phone you have.
When the cellular phone is out of th e service area or in a place inac-
cessible by radio waves, “No Service” is displayed.

208
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
1. AUDIO/VIDEO SYSTEM OPERATION
1. QUICK REFERENCE
Operations such as selecting a preset station and adjusting the sound balance are car-
ried out on the screen.
X Using the instrument panel
Press the “RADIO” or “MEDIA” button to display the audio/video screen.
XUsing the Remote Touch
Press the “MENU” button on the Remote Touch, then select “Radio” or “Media” to
display the audio/video screen.
If a Mark Levinson brand audio system is in stalled, the “Mark Levinson” logo is shown
on the panel.

211
1. AUDIO/VIDEO SYSTEM OPERATION
5
AUDIO/VIDEO SYSTEM
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
“RADIO”, “MEDIA” button: Press to dis-
play screen buttons for the audio/video sys-
tem.
“PWR·VOL” knob: Press to turn the audio/
video system on and off. Turn this knob to
adjust the volume. The system turns on in
the last mode used. X
Using the instrument panel
1Each time the “RADIO” or “MEDIA”
button is pressed, the audio control
mode changes.
“RADIO” button: To display the “A M ”,
“FM” , “SAT” and “Apps” tabs on the screen.
(Radio mode)
“MEDIA” button: To display the “DISC”,
“BT Audio” , “A U X ” , “USB” and “iPod” tabs
on the screen. (Media mode)
X Using the Remote Touch
1Press the “MENU” button on the
Remote Touch.
TURNING THE SYSTEM ON
AND OFF
z A function that enables automatic return
to the previous screen from the audio/
video screen can be selected. See page
51 for details.
SWITCHING BETWEEN
FUNCTIONS

212
1. AUDIO/VIDEO SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
2Select “Radio” or “Media”.
3Select the desired tab.
1Press the “RADIO” or “MEDIA”
button. (Using the instrument panel)
Press the “MENU” button on the
Remote Touch and select “Radio” or
“Media” . (Using the Remote Touch)
2Select .
3Select the “DSP” tab to display this
screen.
4Select the desired items to be set.
5Select “OK”.
zUp to 4 tabs can be displayed on the
screen. Select
or , located either
side of the screen tabs, to display tabs
from the previous or next page.
z The desired audio mode can be found by
selecting or and then selecting
that audio mode tab.
INFORMATION
●
If a disc is not inserted, the DVD player
cannot be turned on.
●The DVD player can be turned off by
ejecting a disc.
●When radio or media mode is selected,
the respective screen buttons are dis-
played on the screen.
●Dimmed screen buttons cannot be oper-
ated.
DSP CONTROL

214
1. AUDIO/VIDEO SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
2Select the desired screen button.
3Select “OK”.
1Press the “MEDIA” button. (Using the
instrument panel)
Press the “MENU” button on the
Remote Touch and select “Media”.
(Using the Remote Touch)
2Select the “DISC” tab.
3Select “Options” .
4Select “Wide” .
Screen buttonFunction
“Treble”
“+” or “-”Select to adjust high-
pitched tones.
“Mid”
“+” or “-”Select to adjust mid-
pitched tones.
“Bass”
“+” or “-”Select to adjust low-
pitched tones.
“Front” or “Rear”
Select to adjust the
sound balance between
the front and rear
speakers.
“L” or “R”
Select to adjust the
sound balance between
the left and right speak-
ers.
INFORMATION
●
The tone of each mode (such as AM, FM
and DVD player) can be adjusted.
SELECTING SCREEN SIZE
Before selecting screen size, it is neces-
sary to insert a DVD disc and select
DISC mode.

295
1. AIR CONDITIONING SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
6
AIR CONDITIONING
3. AUTOMATIC AIR CONDITIONING SYSTEM
1Press the “A U T O ” button.
2Press the air intake control button to
switch to automatic air intake mode. X
Using the instrument panel
3Press the “” button on “TEMP” to in-
crease the temperature and “” to de-
crease the temperature.
X Using the screen
3Select “” (increase) or “” (decrease).
Left-hand front seat side tempera-
ture control
Right-hand front seat side tempera-
ture control
z The temperature for the driver’s and front
passenger’s seats can be set separately.
z Only the “” and “” buttons on “TEMP”
(driver’s side) can be used to adjust the
temperature for all seats.
USING THE AUTOMATIC AIR
CONDITIONING SYSTEM
Air outlets and fan speed are automati-
cally adjusted according to the temper-
ature setting.
z The air conditioning system automati-
cally switches betw een outside air and
recirculated air modes.
z Press the “OFF” button to turn the fan off.

296
1. AIR CONDITIONING SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
XUsing the instrument panel
1Press the “” button on “TEMP” to in-
crease the temperature and “” to de-
crease the temperature.
X Using the screen
1Select “” (increase) or “” (decrease).
Left-hand front seat side tempera-
ture control
Right-hand front seat side tempera-
ture control
z The temperature for the driver’s and front
passenger’s seats can be set separately.
z Only the “” and “” buttons on “TEMP”
(driver’s side) can be used to adjust the
temperature for all seats.
■ DUAL
X Using the instrument panel
1Press the “DUAL” button.
X Using the screen
1Select “DUAL” .
zWhen the indicator on “DUAL” is on, the
temperature for the driver’s and front pas-
senger’s seats can be set separately.
ADJUST THE SETTINGS
MANUALLY
SETTING THE VEHICLE
INTERIOR TEMPERATURE
“DUAL” is used to set the temperatures
independently for the driver’s seat and
front passenger seat.

297
1. AIR CONDITIONING SYSTEM OPERATION
6
AIR CONDITIONING
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
XUsing the instrument panel
1Press the button on fan speed con-
trol button to increase the fan speed and
press the button to decrease the fan
speed. (7 levels)
X Using the screen
1Select “” on to increase the fan
speed and “” to decrease the fan
speed. (7 levels)
1Press the windshield air flow button.
z The air conditioning system control oper-
ates automatically.
z Recirculated air mode will automatically
switch to outside air mode.
SETTING THE FAN SPEED
zPress the “OFF” button to turn the fan off.
DEFOGGING THE
WINDSHIELD
CAUTION
●To prevent the windshield from fogging
up
• Do not use the windshield air flow but-
ton during cool air operation in
extremely humid weather. The differ-
ence between the temperature of the
outside air and that of the windshield
can cause the outer surface of the wind-
shield to fog up, blocking your vision.

298
1. AIR CONDITIONING SYSTEM OPERATION
ES350/300h_Navi_OM33A66U_(U)13.07.11 10:10
XUsing the instrument panel
1Press the air outlet selector button.
X Using the screen
1Select any mode on the screen. X
Air flows to the up per body (Panel)
X Air flows to the upper body and feet (Bi-
level)
SWITCHING THE AIR
OUTLETS AND AIR FLOW
The outlets from which air is delivered
can be selected manually.
No.Function
Panel
Bi-level
Floor
Floor/windshield