low beam Lexus ES300h 2018 Owner's Manual Quick Guide (OM33D51U)

37
ES300h_QG_OM33D51U_(U)
■Turning the high beam on/off manually
● Switching to low beam
Pull the lever to the original position.The Automatic High Beam indicator will
turn off.
Push the lever away from you to activate
the Automatic High Beam system again.
● Switching to high beam
Press the Automatic High Beam switch.The Automatic High Beam indicator will
turn off and the high beam indicator will
turn on.
Press the switch to activate the Auto-
matic High Beam system again.

96
What to do if...
ES300h_QG_OM33D51U_(U)
*1:If equipped
*2: It also comes on due to natural causes such as natural air leaks and tire inflation pressure changes caused by temperature. Adjust the tire inflation pressure to the specified level.
The light will turn off after a few minutes. In case the light does not turn off even if the tire
inflation pressure is adjusted, have th e system checked by your Lexus dealer.
See the OWNER’S MANUAL
Turn signal indicatorIntuitive parking assist
indicator
*1
Headlight indicator (U.S.A.)
(Flashes)
Slip indicator light
Tail light indicator (Canada)VSC OFF indicator
Headlight high beam indicatorPCS warning light
Automatic High Beam
indicatorBSM outside rear view mirror
indicators
*1
Fog light indicator“AIR BAG ON/OFF”
indicator
“READY” indicator
EV indicator (U.S.A.)Parking brake
indicator
Radar cruise control
indicator(Canada)
Cruise control “SET” indicatorLow outside temperature
indicator
LDA indicator
For further information, refer to the OWNER’S MANUAL.