odometer LEXUS ES300h 2022 Owners Manual
[x] Cancel search | Manufacturer: LEXUS, Model Year: 2022, Model line: ES300h, Model: LEXUS ES300h 2022Pages: 480, PDF Size: 27.63 MB
Page 79 of 480

772-1. Instrument cluster
2
Vehicle status information and indicators
In the following situations, the actual quantity of fuel remaining in the tank may not be dis-
played correctly. Refer to P.77 if the actual quantity of fuel remaining in the tank is not dis-
played correctly.
• A small amount of fuel is added.
• Fuel is added with the fuel gauge near or at “F”.
• The vehicle is stopped on an uneven surface, such as a slope.
• The vehicle is driven on a slope or around a curve.
Shift position and shift range (P.154)
Odometer and trip meter display ( P.78)
 QHybrid System Indicator
Charge area
Shows regeneration* status.
Regenerated energy will be used to 
charge the hybrid battery (traction bat-
tery).
Hybrid Eco area
Shows that gasoline engine power is not 
being used very often.
The gasoline engine will automatically stop 
and restart under various conditions.
Eco area
Shows that the vehicle is  being driven in an 
Eco-friendly manner.
By keeping the bar display within Eco area, 
more Eco-friendly driving can be 
achieved.
Power area
Shows that an Eco-friendly driving range is 
being exceeded (during full power driving 
etc.)
*: When used in this manual, regeneration  refers to the conversion of energy cre-
ated by the movement of the vehicle into 
electrical energy.
 QEngine speed
On hybrid vehicles, engine speed is pre-
cisely controlled in order to help improve 
fuel efficiency and reduce exhaust emis-
sions etc.
There are times when the engine speed that 
is displayed may differ even when vehicle 
operation and driving conditions are the 
same.
 QHybrid System Indicator is displayed 
when
The Hybrid System Indicator is displayed in 
the following situations:
 OThe shift lever is in D or S.
 OThe hybrid system is started.
 QManually updating the fuel gauge and 
possible driving range
The fuel gauge and the possible driving 
range are linked. If the displays of the fuel 
gauge and possible driving range do not 
update after adding a small amount of fuel, 
the displays can be updated by performing 
the following procedure.
1 Stop the vehicle on a level surface.
2 Press the “ODO TRIP” switch to 
change the odometer and trip meter 
display to odometer.
3 Turn the power switch off.
4 While pressing and holding the “ODO 
TRIP” switch, turn the power switch to 
ON mode.
H
I
A
B
C
D 
Page 80 of 480

782-1. Instrument cluster
5Continue to hold the “ODO TRIP” 
switch for approximately 5 seconds, 
and then release it once the odometer 
begins flashing.
Updating is complete once the odometer 
flashes for approximately 5 seconds and 
then the display returns to normal.
 QOutside temperature display
 OIn the following situations, the correct 
outside temperature may not be dis-
played, or the display may take longer 
than normal to change:
• When stopped, or driving at low speeds  (less than 12 mph [20 km/h])
• When the outside temperature has  changed suddenly (at the entrance/exit 
of a garage, tunnel, etc.)
 OWhen “--” or “E” is displayed, the system 
may be malfunctioning. Take your vehicle 
to your Lexus dealer.
 QLiquid crystal display
 P.86
 QCustomization
The gauges and meters can be customized 
on   of the multi-information display. 
(  P.89)
 QDisplay items
 Odometer
Displays the total distance the vehicle has 
been driven.
Trip meter A/trip meter B
Displays the distance the vehicle has been 
driven since the meter was last reset. Trip 
meters A and B can be used to record and 
display different distances independently.
Distance until next engine oil 
change
Displays the distance the vehicle can be 
driven until an oil change is necessary.
 QChanging the display
Each time the “ODO TRIP” switch is 
pressed, the displayed item will be 
changed. When the trip meter is dis-
played, pressing and holding the switch 
will reset the trip meter.
WARNING
 QThe information display at low tem-
peratures
Allow the interior of the vehicle to warm 
up before using the liquid crystal infor-
mation display. At extremely low tem-
peratures, the information display 
monitor may respond slowly, and display 
changes may be delayed.
For example, there is a lag between the 
driver’s shifting and the new gear num-
ber appearing on the display. This lag 
could cause the driver to downshift 
again, causing rapid and excessive 
engine braking and possibly an accident 
resulting in death or injury.
NOTICE
 QTo prevent damage to the engine and 
its components
 ODo not let the indicator needle of the 
tachometer enter the red zone, which 
indicates the maximum engine speed.
 OThe engine may be overheating if the 
engine coolant temperature gauge is 
in the red zone (H). In this case, imme-
diately stop the vehicle in a safe place, 
and check the engine after it has 
cooled completely. ( P.396)
Odometer and trip meter dis-
play