reset Lexus ES330 2006 Descriptions of Functions For More Effective Use / OWNER'S MANUAL (OM33703U)

For detailed information, refer to the description given in each Section\
.
PICTORIAL INDEX
ivPage
1Tachometer
lvii
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2Traction control system off indicator light cclxxiv .
3Vehicle stability control system/traction control
system warning light lxvi. . . . . . . . . . . . . . . . . . . . . . . .
4Engine oil replacement reminder light lxiii
. . . . . . . .
5Headlight indicator light xxxiii
. . . . . . . . . . . . . . . . . . . .
6Headlight high beam indicator light xxxviii . . . . . . . .
7Turn signal indicator light xxxviii
. . . . . . . . . . . . . . . . .
8Fog light indicator light xxxix
. . . . . . . . . . . . . . . . . . . . .
9Cruise control indicator light cclxix
. . . . . . . . . . . . . .
10Slip indicator light cclxxiii, cclxxvi
. . . . . . . . . . . . . . .
11Automatic headlight leveling system
warning light lxvii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12Low fuel level warning light lxvii
. . . . . . . . . . . . . . . . . .
13Automatic transmission indicator lights cclxiii . . . .
14Engine coolant temperature gauge lvi
. . . . . . . . . . . . . Page
15Odometer and trip meter
lvii
. . . . . . . . . . . . . . . . . . . . .
16Trip meter reset knob lvii
. . . . . . . . . . . . . . . . . . . . . . . .
17Fuel gauge lv
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18Low washer fluid warning light lxvii
. . . . . . . . . . . . . . .
19Low engine oil level warning light lxiii
. . . . . . . . . . . .
20Multiinformation display lxviii
. . . . . . . . . . . . . . . . . . .
21Rear light failure warning light lxvi
. . . . . . . . . . . . . . .
22Low engine oil pressure warning light lxii
. . . . . . . . .
23Brake system warning light lx
. . . . . . . . . . . . . . . . . . . .
24Antilock brake system warning light lxv
. . . . . . . . . .
25Driver’s seat belt reminder light lxi
. . . . . . . . . . . . . . . .
26Charging system warning light lxii
. . . . . . . . . . . . . . . .
27SRS warning light lxi
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
28Open door warning light lxvi
. . . . . . . . . . . . . . . . . . . . .
29Malfunction indicator lamp lxiv
. . . . . . . . . . . . . . . . . .

For detailed information, refer to the description given in each Section\
.
PICTORIAL INDEX
viPage
1Tachometer
lvii
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2Traction control system off indicator light cclxxiv .
3Vehicle stability control system/traction control
system warning light lxvi. . . . . . . . . . . . . . . . . . . . . . . .
4Tail light indicator light xxxv
. . . . . . . . . . . . . . . . . . . . .
5Headlight high beam indicator light xxxviii . . . . . . . .
6Turn signal indicator light xxxviii
. . . . . . . . . . . . . . . . .
7Fog light indicator light xxxix
. . . . . . . . . . . . . . . . . . . . .
8Cruise control indicator light cclxix
. . . . . . . . . . . . . .
9Slip indicator light cclxxiii, cclxxvi
. . . . . . . . . . . . . . .
10Automatic headlight leveling system
warning light lxvii . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11Low fuel level warning light lxvii
. . . . . . . . . . . . . . . . . .
12Automatic transmission indicator lights cclxiii . . . .
13Engine coolant temperature gauge lvi
. . . . . . . . . . . . . Page
14Odometer and trip meter
lvii
. . . . . . . . . . . . . . . . . . . . .
15Trip meter reset knob lvii
. . . . . . . . . . . . . . . . . . . . . . . .
16Fuel gauge lv
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17Low washer fluid warning light lxvii
. . . . . . . . . . . . . . .
18Low engine oil level warning light lxiii
. . . . . . . . . . . .
19Multiinformation display lxviii
. . . . . . . . . . . . . . . . . . .
20Rear light failure warning light lxvi
. . . . . . . . . . . . . . .
21Low engine oil pressure warning light lxii
. . . . . . . . .
22Brake system warning light lx
. . . . . . . . . . . . . . . . . . . .
23Antilock brake system warning light lxv
. . . . . . . . . .
24Driver’s seat belt reminder light lxi
. . . . . . . . . . . . . . . .
25Charging system warning light lxii
. . . . . . . . . . . . . . . .
26SRS warning light lxi
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
27Open door warning light lxvi
. . . . . . . . . . . . . . . . . . . . .
28Malfunction indicator lamp lxiv
. . . . . . . . . . . . . . . . . .

KEYS AND DOORS
xxvi
Locking with power door lock switch
1Lock2Unlock
To lock all the doors simultaneously, push the power door
lock switch down on the front side. Pushing down on the
rear side will unlock them.
The same switch is also located on the front passenger’s side. If you do any of the following,
no door can be unlocked with the
power door lock switch.
 Lock all the doors with the key or wireless remote control
when all the doors are closed.
 Open the driver’s door or front passenger’s door and move
the inside lock buttons of both front doors to the lock
position, then close the front doors.
The power door lock switch can be reset in the following ways.
 Turn the ignition key to the “ON” position.
 Unlock all the doors with the key or wireless remote control.
 Unlock the driver’s door or front passenger’s door with the
inside lock button, and then unlock all the doors with the
power door lock switch.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
lvii
TACHOMETER
The tachometer indicates engine speed in thousands of
rpm (revolutions per minute). Use it while driving to
prevent engine overrevving.
Driving with the engine running too fast causes excessive
engine wear and poor fuel economy. Remember, in most
cases the slower the engine speed, the greater the fuel
economy.
NOTICE
Do not let the indicator needle get into the red zone. This
may cause severe engine damage.
ODOMETER AND TRIP METER
Trip meter reset knob
This meter displays the odometer and two trip meters. To
change the mode indication, push the trip meter reset
knob briefly. Each time you push the knob, the mode
changes in order from the odometer to trip meter A to trip
meter B, then back to the odometer.
The odometer records the total distance the vehicle has
been driven. The twin trip meter records two different
distances independently.
For example, you can use one meter to calculate the fuel
economy and the other to measure the distance on each trip.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
lxiii
(g) Low Engine Oil Level Warning Light
This light warns that the engine oil level is too low. Add oil as
soon as possible. (For instructions, see “Checking the engine
oil level” on page ccclvi.)
While driving on steep inclines or rough roads which causes
the vehicle to substantially sway or on curves, this light may
come on due to the movement of engine oil in the engine.
In normal conditions, due to engine oil consumption, this light
may come on earlier than the specified service interval of the
scheduled maintenance. This is because the engine oil is
consumed to the low level within the scheduled maintenance
interval and does not indicate a problem. (For detailed
information, see “Facts about engine oil consumption” on page
cccliv.)
NOTICE
Continued engine operation with low engine oil will
damage the engine.
(h) Engine Oil Replacement Reminder Light (for vehicles sold in U.S.A.)
This light acts as a reminder to replace the engine oil.
This light will come on when the ignition key is turned to the
“ON” position and will go off after about a few seconds.
When you drive for about 7200 km (4500 miles) after the
engine oil replacement, this light illuminates for about 3
seconds and then flashes for about 12 seconds with the
ignition key turned to the “ON” position. If you continue driving
without replacing the engine oil, and if the distance driven
exceeds 8000 km (5000 miles), the light will come on after the
ignition key is turned to the “ON” position. The light will remain
on thereafter.
If the light is flashing, we recommend that you replace the
engine oil at an early opportunity depending on the driving and
road conditions. If the light comes on, replace it as soon as
possible.
The system must be reset after the engine oil replacement.
Reset the system by the following procedure:
1. Turn the ignition key to the “ACC” or “LOCK” position with
the odometer reading shown. (For details, see “Odometer and
trip meter” on page lvii.)
2. Turn the ignition key to the “ON” position while holding down
the trip meter reset knob.
Hold down the knob for at least 5 seconds. The odometer
indicates “000000” and the light goes off.
If the system fails to reset, the light will continue flashing.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
lxix
The following information is displayed in the instrument
cluster
when you push the “DISP” button with the ignition
switch turned on.
Each time you push the “DISP” button, the display toggles
through this information.
(1) Instantaneous fuel consumption
(2) Average fuel consumption
(3) Driving range
(4) Average vehicle speed
(5) Driving time
The displayed values in the multi −information display indicate
general driving conditions. Accuracy varies with driving habits
and road conditions.
When the ignition switch is on, the last previously used mode
displayed just before the ignition switch is off will appear.
If the electrical power source has been disconnected from the
multi−information display, the display will automatically be set
to the initial mode.
When the instrument panel lights are turned on, the brightness
of the display will be reduced.
CAUTION
Do not adjust the display while the vehicle is moving.
Be sure to adjust the display only when the vehicle is
stopped.
(1) Instantaneous fuel consumption (“MPG” or “L/100km”)
The instantaneous fuel consumption is calculated and
displayed based on distance and fuel consumption for 2
seconds with the engine running.
The displayed value is updated every 2 seconds.
Note that an accurate figure may not be shown in the following
cases.
 The vehicle is stopped with the engine running. (The display
will indicate the extremely high fuel consumption.)
 The vehicle is driving down a long slope applying the engine
brake. (The display will indicate the extremely low fuel
consumption.)
The calculation is reset when the ignition switch is turned off.
(2) Average fuel consumption (“AVG. MPG” or “AVG. L/100 km”)
Average fuel consumption is calculated and displayed
based on total driving distance and total fuel consumption
with the engine running.
The displayed value is updated every 10 seconds.
To reset the calculations, push and hold the “DISP” button.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
lxx
(3) Driving range(“RANGE MI” or “RANGE km”)
The distance the vehicle can travel with the remaining fuel
is calculated and displayed based on the quantity of
remaining fuel and past fuel consumption.
The driving range display indicates the approximate distance
that you can drive until the fuel gauge reaches “E”. It is dif ferent
from the actual distance traveled.
The displayed value is updated every time the fuel equivalent
for 1 mile or 1 km is consumed.
Every time you refuel the vehicle, the calculation is reset.
The actual driving range varies with driving habits and road
conditions. If fuel consumption is good, the driving range will
be longer than indicated. If fuel consumption is poor, the
driving range will be shorter than indicated.
If the low fuel level warning light comes on, refuel the vehicle
even if the display indicates that the vehicle can be driven
further.
(4) Average vehicle speed (“AVG. MPH” or “AVG. km/h”)
Average vehicle speed is calculated and displayed based
on total driving distance and total driving time with the
engine running.
The displayed value is updated every 10 seconds.
To reset the calculations, push and hold the “DISP” button.
(5) Driving time(“E/T”)
The elapsed time after the engine starts is displayed.
When the engine is started, driving time is counted from 0:00.
Up to 99:59 (99 hours, 59 minutes) can be displayed. When
the driving time exceeds 99:59, the counter returns to 0:00.
To reset the calculations, push and hold the “DISP” button.

Finish
INTERIOR EQUIPMENT
lxxvi
CLOCK
The digital clock indicates the time with the ignition key at
the “ACC” or “ON” position. To reset the hour, press the
“H” button. To reset the minutes, press the “M” button.
To adjust the time to the nearest hour, press the “:00”
button.
For example, if the “:00” button is pressed when the time is
between 9:30 — 9:59 or between 10:01 — 10:29, the time will
change to 10:00.
With the tail lights on, the brightness of the time indication will
be reduced.
If the electrical power source has been disconnected from the
clock, the time display will automatically be set to 1:00 (one
o’clock).
CIGARETTE LIGHTER AND ASHTRAY
Cigarette lighter and ashtray
To use the cigarette lighter and ashtray, first push against
the ashtray cover. Then when the ashtray opens out,
press in the cigarette lighter. After it finishes heating up,
it automatically pops out ready for use.
Do not hold the cigarette lighter pressed in.
If the engine is not running, the ignition key must be in the
“ACC” position to use the lighter.
When finished with your cigarette, thoroughly extinguish it in
the ashtray to prevent other cigarette butts from catching fire.
After using the ashtray, close the lid completely.
To remove the ashtray, just pull it up.

AUDIO
ccii
1Ejecting a CD
(See page ccxii for details.)
2Function buttons
1 — 6: Station selector buttons
(See page ccviii for details.)
SCAN: Scan tuning
(See page ccix for details.)
P.SCAN: Preset scan tuning
(See page ccix for details.)
3Display of functions in TAPE or CD mode
:DOLBY NR
(See page ccx for details.)
 : Rewinding or reversing
(See page ccx or ccxvi for details.)
 : Fast forwarding
(See page ccx or ccxvi for details.)
RPT: Automatic repeat
(See page ccxi or ccxvi for details.)
:CD selection
(See page ccxiv for details.)
RAND: Random access
(See page ccxvii for details.)
SCAN: Scan selection
(See page ccxv for details.)
4CD slot
(See page ccxii for details.)
5Automatic Sound Levelizer (ASL)/Mute
(See page cciv or ccvi for details.)
6TUNE/AUDIO CONTROL knob
(See page ccv for details.)
7 :Side change
(See page ccx for details.)
8Mode selectors
(See page cciv for details.)
9Stopping and ejecting a cassette tape
(See page ccix for details.)
10Turning the system on and adjusting the volume
(See page cciii for details.)
11Cassette tape slot
(See page ccix for details.)
12Radio mode: Seek tuning
(See page ccviii for details.)
TAPE mode: Direct access to a desired program
(See page ccxi for details.)
CD mode: Direct access to a desired program
(See page ccxvi for details.)

AUDIO
ccviii(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1 — 6) and
hold it until a beep is heard. This sets the station to the
button and the button number (1 — 6) appears on the
display.
Each
button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse. (c) Selecting a station
Tune in the desired station using one of the following methods.
Seek tuning: Push the “SEEK” button. The radio will begin
seeking up
or down for a station of the nearest frequency and
will stop on reception. Each time you push the button, the
stations will be searched automatically one after another.
Preset tuning: Push the button (1 — 6) for the station you
want. The button number (1 — 6) and station frequency
appear on the display.
Manual tuning: Turn the “TUNE” knob. The radio will step up
or down to another frequency.