maintenance reset Lexus ES350 2013 REMOTE TOUCH (WITH NAVIGATION SYSTEM) / LEXUS 2013 ES300H,ES350 OWNERS MANUAL (OM33A01U)

658
ES350 300h_OM_OM33A01U_(U)
6-2. Maintenance
■Repair and replacement
It is recommended that genuine Lexus parts be used for repairs to ensure perfor-
mance of each system. If non-Lexus parts are used in replacement or if a repair shop
other than a Lexus dealer performs repairs, confirm the warranty coverage.
■Reset the maintenance data (U.S.A. only)
After the required maintenance is performed according to the maintenance sched-
ule, please reset the maintenance data.
To reset the data, follow th e procedure described below:
Switch the display to the trip meter “A” ( P. 94) when the engine
is running .
Turn the “START STOP ENGINE” <“POWER”> switch off.
While pressing the “ODO TRIP” button ( P. 94), turn the “START STOP
ENGINE” <“POWER”> switch to the IGNITION ON mode (do not start
the engine because otherwise the reset mode will be canceled).
■Allow inspection and repairs to be performed by a Lexus dealer
●Lexus technicians are well-trained specialist s and are kept up to date with the latest
service information. They are well informed about the operations of all systems on
your vehicle.
●Keep a copy of the repair order. It proves that the maintenance that has been per-
formed is under warranty coverage. If any problem should arise while your vehicle
is under warranty, your Lexus dealer will promptly take care of it. The message shown in the illustration will
appear on the display.
Continue to press and hold the button until
the trip meter displays “000000”.
1
2
3

696
ES350 300h_OM_OM33A01U_(U)
6-3. Do-it-yourself maintenance
■How to initialize the tire pressure warning systemPark the vehicle in a safe place and turn the “START STOP
ENGINE” <“POWER”> switch off.
Initialization cannot be performed while the vehicle is moving.
Adjust the tire inflation pressure to the specified cold tire inflation
pressure level. ( P. 835)
Make sure to adjust the tire pressure to the specified cold tire inflation pres-
sure level. The tire pressure warning sy stem will operate based on this pressure
level.
Turn the “START STOP ENGINE ” <“POWER”> switch to IGNI-
TION ON mode.
Press and hold the tire pres-
sure warning reset switch until
the tire pressure warning light
blinks slowly 3 times.
Wait for a few minutes with the “START STOP ENGINE”
<“POWER”> switch in IGNITION ON mode and then turn
the “START STOP ENGINE” <“POWER”> switch off.
1
2
3
4
5

700
ES350 300h_OM_OM33A01U_(U)
6-3. Do-it-yourself maintenance
■The initialization operation
●Make sure to carry out initialization after adjusting the tire inflation pressure.
Also, make sure the tires are cold before carrying out initialization or tire inflation
pressure adjustment.
●If you have accidentally turned the “START STOP ENGINE” <“POWER”> switch
off during initialization, it is not necessary to press the reset switch again as initial-
ization will restart automatically when the “START STOP ENGINE” <“POWER”>
switch has been turned to IGNITION ON mode for the next time.
●If you accidentally press the reset switch when initialization is not necessary, adjust
the tire inflation pressure to the specified level when the tires are cold, and conduct
initialization again.
■When initialization of the tire pressure warning system has failed
Initialization can be completed in a few minutes. However, in the following cases, the
settings have not been recorded and the system will not operate properly. If
repeated attempts to record tire inflation pressure settings are unsuccessful, have
the vehicle inspected by your Lexus dealer.
●When operating the tire pressure warning reset switch, the tire pressure warning
light does not blink 3 times.
●After carrying out the initialization proced ure, the tire pressure warning light blinks
for 1 minute then stays on after driving for 20 minutes.
■Tire pressure warning system certification
MODEL/FCC IDs:
Transmitter: PAXPMVC010
Initiator: HYQ22AAA
For vehicles sold in the U.S.A.
Note:
This device complies with part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC WARNING:
Changes or modifications not expressly ap proved by the party responsible for com-
pliance could void the user’s authority to operate the equipment.
For vehicles sold in Canada
Note:
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must acc ept any interference, including interfer-
ence that may cause undesired operation of the device.

7747-2. Steps to take in an emergency
ES350 300h_OM_OM33A01U_(U)
A warning message is shown on the multi-information display. After taking
the specified steps to correct the suspected problem, check that the
warning message goes off.
Follow the correction procedures.
Wa r n i n g m e s s a g eDetailsCorrection procedure
Indicates that the Auto-
matic High Beam switch
is pressed while the head-
lights are in low beam.Turn the high beam on
and press the Automatic
High Beam switch again.
Indicates that the washer
fluid level is lowAdd washer fluid.
Indicates that all mainte-
nance according to the
driven distance on the
maintenance schedule
*
should be performed
soon.If necessary, perform
maintenance.
Comes on approxi-
mately 4500 miles
(7200 km) after the
maintenance data has
been reset.
(If equipped)
(U.S.A. only)

7757-2. Steps to take in an emergency
ES350 300h_OM_OM33A01U_(U)
7
When trouble arises
Wa r n i n g m e s s a g eDetailsCorrection procedure
Indicates that all mainte-
nance is required to cor-
respond to the driven
distance on the mainte-
nance schedule
*.Pe r f o r m t h e n e c e s s a r y
maintenance. Please
reset the maintenance
data after the mainte-
nance is performed
( P. 6 5 8 )
Comes on approxi-
mately 5000 miles
(8000 km) after the
maintenance data has
been reset.
(The indicator will not
work properly unless the
maintenance data has
been reset.)
Indicates that the tire
inflation pressure is lowCheck the tire inflation
pressure, and adjust to
the appropriate level.
Indicates a malfunction in
the tire pressure warning
system
Stop the vehicle in a safe
place and turn the
“START STOP ENGINE”
<“POWER”> switch off
then on again.
If the tire pressure
warning indicator
flashes for 1 minute
then illuminates, there
is a malfunction in the
system. Have the vehi-
cle inspected at your
Lexus dealer.
(U.S.A. only)

899Alphabetical index
ES350 300h_OM_OM33A01U_(U)
Rear turn signal lightsReplacing light bulbs ........................ 734
Turn signal lever ................................... 221
Wattage ................................................. 836
Rear view mirror Inside rear view mirror ..................... 164
Outside rear view mirrors ...............167
Rear window defoggers
*................. 372
Refueling .................................................. 239 Capacity ................................................ 828
Fuel types .............................................. 828
If the fuel filler door cannot be opened ......................... 242
Opening the fuel tank cap...............241
Regenerative braking .............................72
Remote Touch
*..................................... 109
Replacing Electronic key battery ....................... 710
Fuses........................................................... 712
Light bulbs ............................................. 724
Tires ..........................................................784
Reporting safety defects for U.S. owners...................................868
Reset the maintenance data ............658
Road accident cautions ........................ 78 Safety Connect ....................................... 641
Seat belts
Adjusting the seat belt........................ 33
Automatic Locking Retractor ........ 34
Child restraint system installation ............................................. 62
Cleaning and maintaining the seat belt .......................................655
Emergency Locking Retractor................................................ 34
How to wear your seat belt..............32
How your child should wear the seat belt .......................................... 34
Pre-collision seat belts ....................... 34
Pregnant women, proper seat belt use ......................................... 35
Reminder light and buzzer ........... 754
Seat belt extender ................................ 34
Seat belt pretensioners ...................... 33
SRS warning light .............................. 752
Seat heaters............................................ 620
Seat position memory .......................... 153
Seat ventilators...................................... 620
Seating capacity ..................................... 194
S
*: For vehicles with a navigation system, refer to the “Navigation System Owner’s Manual”.

902Alphabetical index
ES350 300h_OM_OM33A01U_(U)
Rear sunshade switch ......................623
Rear window and outside rear view mirror defoggers
switch
*................................................ 372
Seat heater switches........................ 620
Seat ventilator switches ................. 620
“SOS” button......................................... 641
“START STOP ENGINE” switch......................................................197
Talk switch
*..............................444, 574
Telephone switches
*...........444, 574
Tilt and telescopic steering control switch ................. 162
Tire pressure warning reset switch................................................... 696
Trunk closer switch ............................ 145
Trunk opener switch ......................... 144
Trunk opener main switch.............. 145
Vehicle-to-vehicle distance button .................................................... 251
VSC OFF switch .............................. 300
Window lock switch.......................... 170
Windshield wipers and washer switch .........................235 Tachometer ................................................93
Tail lights
Light switch........................................... 224
Replacing light bulbs ....................... 736
Welcome light illumination control.................................................... 123
Talk switch
*................................. 444, 574
Telephone switches
*............... 444, 574
Theft deterrent system Alarm .......................................................... 84
Engine immobilizer system .............80
Immobilizer system.............................. 82
Tire inflation pressure Maintenance data..............................835
Tire inflation pressure display function................................................... 101
Warning light ....................................... 755
Warning message............................. 775
Tire information .................................... 840 Glossary................................................. 847
Size ...........................................................843
Tire identification number ............. 842
Uniform Tire Quality Grading ..............................................845
Tire pressure warning system Function ..................................................695
Initializing ...............................................695
Installing tire pressure warning valves and transmitters................695
Registering ID codes ....................... 697
Tire pressure warning reset switch ...................................................696
Warning light ....................................... 755
Warning message..................775, 776
T