coolant reservoir Lexus GS250 2012 Owner's Manual

6606-3. Do-it-yourself maintenance
GS350/250_EE (OM30C36E)
Engine compartment
For right-hand drive vehicles:
The battery and the fuse box in front of the battery are located on the oppo-
site side of the engine compartment.
Fuse boxes (P. 700)
Battery (P. 667)
Engine oil level dipstick
(P. 662)
Engine coolant reservoir
(P. 665)Engine oil filler cap
(P. 663)
Washer fluid tank (P. 671)
Electric cooling fans
Condenser (P. 667)
Radiator (P. 667)1
2
3
4
5
6
7
8
9

665 6-3. Do-it-yourself maintenance
6
Maintenance and care
GS350/250_EE (OM30C36E)The coolant level is satisfactory if it is between the “FULL” and
“LOW” lines on the reservoir when the engine is cold.
Reservoir cap
“FULL” line
“LOW” line
If the level is on or below the
“LOW” line, add coolant up to the
“FULL” line. (P. 829)
Coolant selection
Only use “Toyota Super Long Life Coolant” or a similar high quality eth-
ylene glycol based non-silicate, non-amine, non-nitrite, and non-borate cool-
ant with long-life hybrid organic acid technology.
“Toyota Super Long Life Coolant” is a mixture of 50% coolant and 50%
deionized water. (Minimum temperature: -35C [-31F])
For more details about engine coolant, contact any authorized Lexus dealer
or repairer, or another duly qualified and equipped professional.
If the coolant level drops within a short time of replenishing
Visually check the radiator, hoses, engine coolant reservoir caps, drain cock
and water pump.
If you cannot find a leak, have any authorized Lexus dealer or repairer, or
other duly qualified and equipped professional, test the cap and check for
leaks in the cooling system.
Engine coolant
1
2
3

6666-3. Do-it-yourself maintenance
GS350/250_EE (OM30C36E)
CAUTION
When the engine is hot
Do not remove the engine coolant reservoir cap or the radiator cap. (P.
830)
The cooling system may be under pressure and may spray hot coolant if the
cap is removed, causing serious injuries, such as burns.
NOTICE
When adding coolant
Coolant is neither plain water nor straight antifreeze. The correct mixture of
water and antifreeze must be used to provide proper lubrication, corrosion
protection and cooling. Be sure to read the antifreeze or coolant label.
If you spill coolant
Be sure to wash it off with water to prevent it from damaging parts or paint.