turn signal Lexus GS300 2001 Audio

AUDIO
153
Radio operation
(a) Listening to the radio
21G082b
Push these buttons to choose either an AM or FM station.
ºAMº, ºFM1º, ºFM2º or ªFM TYPEº appear on the display.
21G111a
Turn this knob to the right to step up the station band or
to the left to step down.
Your radio automatically changes to stereo reception when a
stereo broadcast is received. ºSTº appears on the display. If
the signal becomes weak, the radio reduces the amount of
channel separation to prevent the weak signal from creating
noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception. In this case, ºSTº
disappears from the display.

AUDIO
166When the button is pushed until you hear a beep, ªD.RANDº
appears on the display. The system selects a track and discs
in the magazine which are set and plays it. To cancel it, push
the button once again.
When a track is skipped or the system is inoperative, push the
button to reset.
(g) If the player malfunctions
If ºWAITº appears on the display, audio signals of the disc
cannot be read or the system has trouble. Push the ºDISCº
button once again.
If the player does not operate, check that the disc surface is not
soiled or damaged. If the disc is O.K., the following two causes
are possible.
Condensation may have occurred on the internal
mechanism of the automatic changer. Open the cover to let
the air circulate.
The temperature of the player's internal mechanism is
raised because of high external temperature. Remove the
magazine from the player to cool it.
If the player still does not operate, take it to your Lexus dealer.
Steering pad switches (GS430 only)
21g137a
The steering pad switches are installed on the left side of the
steering wheel.
ªMODEº switch: Push the ªMODEº switch to select an audio
mode. Each push changes the mode sequentially if the
desired mode is ready to use. When you push the switch with
the audio system turned off, the audio system turns on.
ªVOLº switches: Push ª
º to increase the volume and ª º
to decrease the volume. The volume continues to increase or
decrease while the switch is being pressed.
ªSETº switch: Push the ªSETº switch to change to the preset
volume. To preset the volume, adjust the volume and push the
switch until you hear a beep.