display Lexus GS300 2001 Basic Funcitons

Route Guidance Screen
24
UN040
Split screen: Map and guidance screen are
shown in a screen mode. (For detail about
Guidance screen, see page 36.)
The two route guidance screens have a
number of indicators and switches with
which you should be familiar.
Map/Guide: To change two screen modes.
[GPS]: Upon reception of signals from the
GPS (Global Positioning System), this mark
appears. (For details, see page 39.)
zoom IN / zoom OUT: Magnifies or reduces
the map scale. (For details, see page 37.)POI: Touch this switch, and symbols of
points of interest are shown on the screen.
(For details, see page 33.)
Mark: Touch this switch for one±touch regis-
tration of the marked point. (For details, see
page 54.)
INFORMATION
The distance up to your destination
appears at the left of the screen.
The time to your destination can also
be displayed. (For the setting steps,
see page 64.)
Chg. Route: The ºChange Routeº screen
appears and the following settings are avail-
able.
Reroute: To change the condition for Re-
route.
Detour: To change the condition for Detour.
(For details, see page 32.)
Way point: To set and delete a way point.
(For details, see page 55.)
Route Preference: To change the condi-
tions of the route preference. (For details,
see page 22.)
Cancel Guidance: To stop the route guid-
ance. When you touch this switch, the map
screen appears.

Route Guidance Screen Current Position Display
25
INFORMATION
If the calculated route includes a trip by
ferry, the route guidance shows a sea
route. After you travel by ferry, the cur-
rent vehicle position may be incorrect.
Upon reception of GPS signals, it is au-
tomatically corrected.
UN042
The current vehicle position mark ap-
pears in the center of the map screen.
You can return to this map screen show-
ing your current position at any time from
any screen by pushing the
ºMAP/
VOICEº
button on the bezel.
During driving, the current vehicle position
mark is fixed in the center of the screen and
the map moves.
If you move the map with a ºone±touchº
scroll (see page 38 for details), the current
vehicle position mark continues to track your
current location.
INFORMATION
When you use the ºone±touchº scroll
feature, the current vehicle position
mark may disappear from the screen.
Move the map with a ºone±touchº
scroll again or push the
ºMAP/
VOICEº button on the bezel to return
to the current vehicle position map
location display.
The current position is automatically set
as your vehicle receives signals from the
GPS (Global Positioning System). If your
current position is not correct, it is auto-
matically corrected after your vehicle re-
ceives signals from the GPS.
INFORMATION
After the battery disconnection, or on
a new vehicle, the current position may
not be correct. As soon as the system
receives signals from the GPS, the cor-
rect current position is displayed.
If you must correct the current position
manually, follow the steps on page 61.

Voice Guidance
26Voice route guidance to the destination
during route guidance. Use voice guid-
ance just for your reference.
You can adjust the volume of the voice or turn
off voice guidance.
UN043
Push the ºMENUº button on the bezel to
display the menu screen. Then touch any
number at the bottom of the screen to se-
lect the desired volume. If you do not
need voice guidance, touch the
ºOFFº
switch.
The selected item is highlighted in green.You can listen to ºVoice route guidanceº by
pushing the
ºMAP/VOICEº button on the
bezel, even if the volume is ºOFFº.
INFORMATION
During route guidance, the voice guid-
ance continues even if the navigation
screen is changed to other screens,
such as the audio screen.

Registration of Your Home
30If you register your home address before-
hand, you can easily set the route back to
your home.
UN044
1. Push the ºMENUº button on the bez-
el to display the menu screen and touch
the
ºMarked Pointº switch.
UN045
2. Touch the ºRegisterº switch of
Home for registering your home.If home is already registered, the
ºRegis-
terº
switch is dimmed.
UN046
You may register the location of your
home by three different methods: current
position, address or map location. Touch
the screen to select your desired method
from the menu.
(a) Registering by current position
When you select this method, the current
vehicle position is immediately regis-
tered as your home. This is the fastest
method to use if you are at your house.
(b) Registering by street address
If you are away from your home, you can
input your home address.
Input the address of the your home in the
same way as any destination input. (See
page 6.)
(c) Registering by map
If you are close to your home, you can
register the location of your home direct-
ly on the map.
Input your home in the same way as the des-
tination input. (See page 22.)

Registration of Your Home Detour Setting
31
(d) Deleting the registration of your
home
UN047
1. Push the ºMENUº button on the bez-
el to display the menu screen and touch
the
ºMarked Pointº switch.
UN048
2. Touch the ºDeleteº switch of Home.The screen changes and displays the map
location of home and a message. If you are
sure what you want to delete, touch the
ºYESº switch. If not, touch the ºNOº
switch.
When you are driving while the route
guidance is operating, you can change
the route to detour around a section of
the route where a delay is caused by road
repairs, an accident, etc.
UN049
Touch the ºChg. Routeº switch if you
encounter a reason to divert from the se-
lected route.

Displaying Points of Interest
33 Points of interest such as gas stations
and restaurants can be displayed on the
map screen. You can also set their loca-
tion as a destination and use them for
route guidance.
UN051
To display a particular type of point of in-
terest on the screen, touch the
ºPOIº
switch on the map screen.
UN052
A window with a limited choice of points of in-
terest will be displayed. When you touch
your desired type of point of interest, sym-
bols will appear on the map screen indicating
where the POI addresses are located.
UN053
All List: If you cannot find your desired point
of interest on the limited choice screen,
touch this switch. The screen then displays
the complete ºPoint of Interestº listing
screen.
UN054
When you select a point of interest type from
either the limited list or the complete list, the
screen will display symbols at those loca-
tions on the map screen.
Local POI Search: If you want to search the
nearest point of interest, touch this switch.
Then choose one of the categories. The sys-
tem will list points within 20 miles.
Touch the
of your desired point of inter-
est. Points of interest which you chose are
displayed on the map screen.
To turn off the symbols of the points of in-
terest on the map screen, touch the
ºPOI
Offº
switch.

Displaying Points of Interest Turn List
34
Setting a POI as a destination
You can select one of the points of inter-
est symbols on the map screen as a des-
tination and use it for a route guidance.
UN304
Directly touch the symbol of the point of
interest that you want to set as a destina-
tion.
The map will shift so the symbol is centered
in the screen and overlaps with the cursor
.The name of the point of interest and the
ºInfoº switch are displayed at the top of the
screen. When you touch the
ºInfoº switch,
the information such as the name and ad-
dress, etc. are displayed. The distance from
your current position can be displayed at the
bottom left of the screen.
When your desired point of interest over-
laps with the cursor, touch the
ºEnt
Destº
switch. The screen changes and
displays the map location of the selected
destination and route preference. (See
ºEntering Destinationº on page 22.)
If the symbols of two or more points of inter-
est overlap as they are close to each other in
location, touch the
ºNextº switch to bring
your desired mark in front of the others.You can change from the map screen to
a ºTurn Listº screen that displays the list
of the roads up to your destination. This
list can be used for a route guidance.
UN056
1. Push the ºMENUº button on the bezel
to display the menu screen and touch the
ºRoute Informationº switch.

Turn List
35
UN057
2. The screen will change to the Entire
Route Map screen where you can touch
the
ºTurn Listº switch.
UN058
You can scroll through the list of roads by
touching
. However, not all road
names in the route may appear on the list.
If a road changes its name without requiring
a turn (such as on a street that runs through
two or more cities), the name change will not
appear on the list. The street name closest
to the starting point will be displayed with a
mileage to the next turn.
These marks indicate the direction
which you should turn at an inter-
section.
INFORMATION
The current vehicle position mark
appears at the bottom of the screen
next to the name of the street you are
driving on. The mark does not move.
If you leave the guidance route, the
name of the street you are on is not
shown on the list next to the current
vehicle position mark.
If the road type you are on changes
between a highway, a main street or
a residential street (at an inter-
change or fork), it will appear on the
turn list.
If a long route has been selected, it
may take a long time to display the
turn list.
Push the ºMAP/VOICEº button on
the bezel to return to the map display
with route guidance.

Guidance Screen
36You can change half of the screen to the
Guidance Screen by touching the
ºMap/
Guideº
switch while the map screen is
displayed. You can choose one out of
two types of Guidance Screen.
UN059
1. Push the ºMENUº button on the bezel
to display the menu screen and touch the
ºGuidance Setupº switch.
UN065
2. The screen will change to the Guidance
setup screen and you can select the
ºGuidance Screen Typeº.
To display Arrow Screen
To display Turn List Screen
Arrow Screen
UN066
This screen shows the current road name
and the distance to the next corner.

Guidance Screen Map Scale
37 Turn List Screen
UN067
The screen shows the Turn List. You cannot
scroll through the list of roads.
UN063
Touch the ºzoom INº switch or the
ºzoom OUTº switch to change the scale
of the map display. The scale bar and indica-
tor at the bottom of the screen indicates the
map scale menu. The scale runs from 1/16th
of a mile to 64 miles. Touch the
ºzoom INº
switch or the ºzoom OUTº switch until
the scale bar changes normally. If you con-
tinue to hold your finger on the switch, the
scale bar changes smoothly.
You can change the scale of the map display
by touching the scale bar directly. It is not
available during driving.The map scale is displayed under the North±
up symbol or Heading±up symbol at the top
left of the screen.
INFORMATION
When the map scale is at the maximum
range of 64 miles, the ºzoom OUTº
switch is dimmed. When the map scale
is at the minimum range of 1/16th mile,
the ºzoom INº switch is dimmed.