change time Lexus GS300 2001 Basic Funcitons

Inputting letters and numbers
2The navigation system operates by
switches on the screen and on the bezel.
When you touch a switch, a beep sounds.
When using the switches on the touch
screen, please use only light pressure
with your finger to protect the screen
from damage. Do not use objects other
than your finger to touch the screen.
UN005
To type in an address etc., directly touch al-
phabet keys on the screen. If you touch a
wrong letter, delete it using the
switch.
Touching the
switch erases one letter.Touching the
ºListº switch will change the
screen to a display of the database items that
match the name or address that you have
entered on the screen. The number of
matching items is shown to the right side of
the screen. If the matching item is more than
9,999, the system displays º
º on the
screen.
To input numerals, touch the
º0±9º switch
and the display will change the screen to
number input display.
UN006
Touching the ºA±Zº switch changes the
screen back to the previous name input dis-
play.
UN007
When a list is displayed, you can scroll or
page through the list by using the appropri-
ate switch.
To shift to the next or previous
page.
To scroll up or down one item at
a time.
This expresses a displayed
screen position.

Destination Input
5 5. By Home: You can select your own home
without entering the address each time. In
this case, it is necessary to register your
home beforehand. See page 16 for the de-
tailed steps.
6. By Emergency: You can select one of
the three points of emergency service points
that have been already stored in the sys-
tem's database. See page 17 for the detailed
steps.
7. By Intersection: You can enter the
names of two intersecting streets. This is
helpful if you do not know the specific street
address of your destination but know the
general vicinity. See page 18 for the detailed
steps.
8. By Freeway Entrance/Exit: You can en-
ter the name of the freeway (interstate) en-
trance or exit. See page 19 for the detailed
steps.
9. By Previous Starting Point: You can en-
ter a point where the system has started to
guide last time. See page 21 for the detailed
steps.
10. By Map Selection: You can select a
destination simply by touching the location
on the displayed map. See page 22 for the
detailed steps.
INFORMATION
When inputting the destination, the
response to the switch may be slow.
ºPoint of Interestº are mainly regis-
tered in ºDetailed map coverage
areasº. The registration is made
based on the NavTech ºStandard
POI Inclusion Listº.
If there is no point registered,
switches such as ºMarked Pointº,
ºHomeº, ºPrevious Destinationº or
ºPrevious Starting Pointºare
dimmed and not available.
The route for returning may not be
the same as that for going.
The route guidance to the destina-
tion may not be the shortest route or
a route without traffic congestion.
Route guidance may not be available
if there is no road data for the speci-
fied location.
When setting the destination, you
should use the map on a scale of one
half mile or smaller.
To select an ºAddressº, ºPoint of In-
terestº, ºFreeway Entrance/Exitº or
ºIntersectionº in a different region, a
search area's change is necessary.
CAUTION
While you are driving, be sure to follow
traffic regulations and keep the road
condition in mind. If a traffic sign on
the road has been changed, the route
guidance may provide wrong informa-
tion.

Destination Input by POINT OF INTEREST
9 There are 3 ways to select a point of in-
terest location.
(a) Input the name of the point of interest
directly.
(b) Inputting a city name first.
(c) Selecting from the points of interest
categories.
It will not take a long time for you to find
your destination if you use a combination
of the searching ways of (a), (b) and (c).
(a) Input the name of the point
of interest directly
Touch the ºPoint of Interestº switch
on the destination screen.
UN017
The ºPoint of Interestº screen appears, and
then you can input the name of the point of
interest.
Touch letters directly on the screen to input
a name. When you input numerals, touch
the
º0±9º switch to display the screen for
numeral input.
If the number of sites becomes 4 or less, or
if you touch the
ºListº switch at the bottom
right of the screen, the screen changes and
displays a list of sites.
UN018
Touch the of your desired destina-
tion. The screen changes and displays
the map location of the selected destina-
tion and the route preference. (See ºEn-
tering Destinationº on page 22.)
If the same name exists in more than one
city, you can search it more easily with the
ºCityº and ºCategoryº switch. (See (b)
Inputting a city name and (c) Selection from
the Points of Interest categories.)

Entering Destination Route Guidance Screen
23
UN037
During the route search, ºRoute Search-
ingº appears at the top of the screen and
changes color from the left. When the
search is completed, three types of
routes are displayed on the screen.
UN038
Touch the ºNextº switch to choose one
from the three routes.Route 1: A route on which you can reach the
destination in the shortest time.
Route 2: A route on which you can reach the
destination in the shortest distance.
Route 3: Other route.
After selecting one, you can start the route
guidance by touching the
ºStartº switch or
starting to move your vehicle.
If you want to set a way point between the
starting point and the destination or change
the search condition, touch the
ºChg.
Routeº
switch. The screen changes and
displays the change route menu. (For de-
tails, see page 24.)
When you keep touching the
ºStartº
switch until you hear a beep, Demo Mode will
start.The route guidance system displays two
different screen modes.
UN039
Single screen: Only map is shown in a
screen mode.

Route Guidance Screen
24
UN040
Split screen: Map and guidance screen are
shown in a screen mode. (For detail about
Guidance screen, see page 36.)
The two route guidance screens have a
number of indicators and switches with
which you should be familiar.
Map/Guide: To change two screen modes.
[GPS]: Upon reception of signals from the
GPS (Global Positioning System), this mark
appears. (For details, see page 39.)
zoom IN / zoom OUT: Magnifies or reduces
the map scale. (For details, see page 37.)POI: Touch this switch, and symbols of
points of interest are shown on the screen.
(For details, see page 33.)
Mark: Touch this switch for one±touch regis-
tration of the marked point. (For details, see
page 54.)
INFORMATION
The distance up to your destination
appears at the left of the screen.
The time to your destination can also
be displayed. (For the setting steps,
see page 64.)
Chg. Route: The ºChange Routeº screen
appears and the following settings are avail-
able.
Reroute: To change the condition for Re-
route.
Detour: To change the condition for Detour.
(For details, see page 32.)
Way point: To set and delete a way point.
(For details, see page 55.)
Route Preference: To change the condi-
tions of the route preference. (For details,
see page 22.)
Cancel Guidance: To stop the route guid-
ance. When you touch this switch, the map
screen appears.

Turn List
35
UN057
2. The screen will change to the Entire
Route Map screen where you can touch
the
ºTurn Listº switch.
UN058
You can scroll through the list of roads by
touching
. However, not all road
names in the route may appear on the list.
If a road changes its name without requiring
a turn (such as on a street that runs through
two or more cities), the name change will not
appear on the list. The street name closest
to the starting point will be displayed with a
mileage to the next turn.
These marks indicate the direction
which you should turn at an inter-
section.
INFORMATION
The current vehicle position mark
appears at the bottom of the screen
next to the name of the street you are
driving on. The mark does not move.
If you leave the guidance route, the
name of the street you are on is not
shown on the list next to the current
vehicle position mark.
If the road type you are on changes
between a highway, a main street or
a residential street (at an inter-
change or fork), it will appear on the
turn list.
If a long route has been selected, it
may take a long time to display the
turn list.
Push the ºMAP/VOICEº button on
the bezel to return to the map display
with route guidance.

Orientation of the Map Limitations of the Navigation System
39 You can change the orientation of the
map from North±up to Heading±up by
touching the direction symbol at the top
left of the screen.
North±up symbol
Regardless of the direction of vehicle travel,
North is always up.
Heading±up symbol
The direction of the vehicle travel is always
up. A red arrow indicates North.This navigation system calculates the
current vehicle position using satellite
signals, various vehicle signals, map
data, etc. However, an accurate position
may not be shown depending on the sat-
ellite condition, road configuration, ve-
hicle condition or other circumstances.
The Global Positioning System (GPS) devel-
oped and operated by the U.S. Department
of Defense provides an accurate current ve-
hicle position using 3 to 4 satellites. The
GPS system has a certain level of inaccura-
cy built in for security reasons. While the
navigation system will compensate for this
most of the time, occasional positioning er-
rors up to 300 feet can and should be ex-
pected. Generally, position errors will be cor-
rected within a few seconds.
When your vehicle is receiving signals from
the satellites, the ºGPSº mark appears at the
top left of the screen.
The GPS signal may be physically ob-
structed, leading to inaccurate vehicle posi-
tion on the map display. Tunnels, tall build-
ings, trucks, or even the placement of
objects on the instrument panel may obstruct
the GPS signals.
The installation of window tinting may also
obstruct the GPS signals. Most window tint-
ing contains some metallic content that will
interfere with the GPS signal reception.
Lexus recommends that window tinting
should not be used on vehicles equipped
with navigation systems.

Limitations of the Navigation System
41
(b) Inappropriate route guid-
ance may occur in the follow-
ing cases:
When turning at a wrong intersection off
the designated route guidance.
If you are heading for a destination with-
out passing through a set way point, auto-
matic rerouting may display a route re-
turning to the set way point.
When turning at an intersection, there is
no route guidance.
When passing through the intersection,
there is no route guidance.
During automatic rerouting, the route
guidance may not be available for the next
turn to the right or left.
It may take a long time to operate auto-
matic rerouting during high speed driving.
In automatic rerouting, a detour route may
be shown.
During automatic rerouting, the route may
not be changed.
The route in a U±turn may be shown or
announced.
A location may have multiple names and
the system will announce one or more.Some routes may not be searched.
If the route to your destination includes
gravel, unpaved roads or alleys, the route
guidance may not be shown.
Your destination point might be shown on
the opposite side of the street.
When a portion of the route has regula-
tions prohibiting the entry of the vehicle
that vary by time or season or other rea-
son.
The road and map data stored in your
navigation system may not be complete
or may not be the latest release.
When replacing the tire(s), contact your
dealer.
This navigation system uses the tire turning
data and is designed to work with factory±
specified tires for your Lexus. Installing tires
that are larger or smaller than the originally
equipped diameter may cause inaccurate
display of the vehicle's position. The tire
pressure also affects the diameter of the tires
so please make sure the tire pressure of all
four tires is correct.