Destination Input Destination Input by Home
7 11. By Map Selection: You can select a
destination simply by touching the location
on the displayed map. See page 25 for the
detailed steps.
INFORMATION
When inputting the destination, the
response to the switch may be slow.
ªPoints of interestº registration is
made based on the NAVTECH ªStan-
dard POI Inclusion Listº and infoU-
SA POI data.
If there is no point registered,
switches such as ªMarked pointº,
ªPrevious destinationº or ªPrevious
starting pointº are dimmed and not
available.
The route for returning may not be
the same as that for going.
The route guidance to the destina-
tion may not be the shortest route or
a route without traffic congestion.
Route guidance may not be available
if there is no road data for the speci-
fied location.
When setting the destination, you
should use the map on a scale of one
half mile or smaller.
To select an ªAddressº, ªPoints of
interestº, ªFreeway Entrance/Exitº
or ªIntersectionº in a different area,
a search area's change is necessary.
CAUTION
While you are driving, be sure to follow
traffic regulations and keep the road
condition in mind. If a traffic sign on the
road has been changed, the route guid-
ance may provide wrong information.
Touch the switch on the Destination
input screen.
The screen changes and displays the
map location of your home. (See ºEnter-
ing Destinationº on page 25.)
The system starts the guidance from your
current position to your home immediately
after you touch the
switch.
For the steps to register your home, see
ºRegistering your homeº on page 40.
