display Lexus GS300 2003 Gauges, Meters And Service Reminder Indicators

GAUGES, METERS AND SERVICE REMINDER INDICATORS
40
ODOMETER AND TRIP METER
13G004
This meter displays the odometer and two trip meters. To
change the mode indication, push the ºODO/TRIPº
button.
The odometer records the total distance the vehicle has
been driven. The twin trip meter records two different
distances independently.
For example, you can use one meter to calculate the fuel
economy and the other to measure the distance on each trip.
To change the trip meter indication from one trip to the
other, push the ºODO/TRIPº button. To set the A trip meter
to zero, display the A meter reading, then push the
ºRESETº button. The same applies for the B trip meter.
The data of trip meters will be cancelled if the electrical power
source is disconnected.
SERVICE REMINDER INDICATORS
AND WARNING BUZZERS
IF THIS INDICATOR OR
BUZZER COMES ON ...DO THIS.
(a)or
(Indicator and buzzer)If parking brake is off,
stop immediately and
contact Lexus dealer.
(b)
(Indicator and buzzer)
Fasten driver's seat
belt.
(c)Fasten front
passenger's seat belt.
(d)Take vehicle to Lexus
dealer immediately.

GAUGES, METERS AND SERVICE REMINDER INDICATORS
50The following service reminder indicators go off after a few
seconds.

or

The following service reminder indicator goes off after about 6
seconds.
The lights other than the slip indicator light may stay on for
about 60 seconds after the ignition key is turned to the ªONº
position. It is normal if they go out after a while.
If any service reminder indicator or warning buzzer does not
function as described above, have it checked by your Lexus
dealer as soon as possible.
INSTRUMENT PANEL LIGHT
CONTROL
13G005
The brightness of the instrument panel lights is
automatically adjusted depending on the brightness of
your surroundings. To adjust the brightness as you like,
turn the knob. However, if the brightness is automatically
adjusted at the maximum, turning the knob cannot change
the brightness.
When the headlight switch is in the first or second click stop,
you can also adjust the brightness of the displays on the audio
and air conditioning systems using this knob.