change time Lexus GS300 2006 Audio

AUDIO
284(f) Your automatic changer
G22046
This vehicle is equipped with an automatic changer which can
store up to 6 discs, and play selected discs or continuously play
all the discs set in the player.
When you insert discs into the player, make sure their labels
face upward. If the disc is inserted incorrectly, the player will
display “CD CHECK” or “DISC CHECK”.
NOTICE
Never try to disassemble or oil any part of the CD
player or DVD player. Do not insert anything except
a disc into the slot.
Do not insert a disc upon another one, or it will
damage to the automatic changer. Insert only one
disc into the slot at a time.
Your CD player or DVD player is intended for use with 12 cm
(4.7 in.) discs only.
Radio operation
(a) Listening to the radio
G22009
Push “AM (AM·SAT)” or “FM” button to choose either an
AM or FM band.
The “AM”, “FM1” or “FM2” screen appears on the display.
If your vehicle is equipped with satellite radio broadcast
system, when you push the “AM·SAT” button, “AM”,
“SAT1”, “SAT2” or “SAT3” station appears on the display. For
details about satellite radio broadcast, see “Radio operation
(XM satellite radio broadcast)” on page 289

AUDIO
287 (d) RDS (Radio Data System)
Program type
G22053
When you touch the “TYPE ” or “TYPE
” switch on the
screen, the current program type receiving from RDS station
appears on the display.
If the system receives no RDS stations, “NO PTY” appears on
the display.
Each time you touch the “TYPE ” or “TYPE
” switch, the
program type changes as in the following:
ROCK
EASY LIS (Easy listening)
CLS/JAZZ (Classical music and Jazz)
R&B (Rhythm and Blues)
INFORM (Information)
RELIGIONMISC.
ALERT (Emergency message)
G22012
When a program is set, “TYPE SEEK” switch appears. Touch
the switch and the system starts to seek the station in the
relevant program type.
Traffic program: A station that regularly broadcasts traffic
information is automatically located.
When you touch the “TRAF” switch, “TRAF SEEK” appears on
the display and the radio will start seeking any traffic program
station.
If any traffic program station is not found, “NOTHING” appears
and the previous mode returns.
If the traffic program station is found, the name for traffic
program station is displayed and “TRAF” is lit for a while until
traffic announcement is received.

AUDIO
288Radio text
G22004
If the system receives a radio text from RDS station, “MSG”
appears on the display. Touch the “MSG” switch, and a text
message is displayed on the screen.
G22013
In case a text message is not accepted in a screen, you can
touch the “MSG” switch and hold it to display the rest of the
message.
When the system can show the station name, “RDS” appears
on the display. Each time you touch the “MSG” switch,
indication on the display changes from the band to the station
name, a radio text in this order. After six seconds passes,
indication returns to the band.

AUDIO
294(h) If the satellite radio tuner malfunctions
When problems occur with the XM tuner, a message will appear on the display. Referring to the table below to identify the problem,
take the suggested corrective action.
ANTENNA
The XM antenna is not connected. Check whether the XM antenna cable is attached securely.
A short−circuit occurs in the antenna or the surrounding antenna cable. See a Lexus certified
dealer.
UPDATING
You have not subscribed to the XM satellite radio. The radio is being updated with the latest
encryption code. Contact the XM satellite radio for subscription information. When a contact is
canceled, you can choose the “CH000” and all free−to−air channels.
The premium channel you selected is not authorized. Wait for about 2 seconds until the radio
returns to the previous channel or “CH001”. If it does not change automatically, select another
channel. If you want to listen to the premium channel, contact the XM satellite radio.
NO SIGNALThe XM signal is too weak at the current location. Wait until your vehicle reaches a location
with a stronger signal.
LOADINGThe unit is acquiring audio or program information. Wait until the unit has received the
information.
OFF AIRThe channel you selected is not broadcasting any programming. Select another channel.
−−−−−There is no song/program title or artist name/feature associated with the channel at that time.
No action needed.
−−−
The channel you selected is no longer available. Wait for about 2 seconds until the radio
returns to the previous channel or “CH001”. If it does not change automatically, select another
channel.
The XM Listener Care Center is also available on the phone, please call (800) 852−9696 during the following hours:
Monday – Saturday: 7 a.m. – 1 a.m. Sunday: 12 p.m – 12 a.m.

AUDIO
302
G22052
The numbers of the trays where the CD is not set are dimmed.(b) Playing a CD
G22026
Push the “DISC” button if CDs are already loaded in the
player.
The “CD CHANGER” screen appears on the display.
The discs set in the player are played continuously, starting
with the last disc you inserted. The disc number of the disc
currently being played, the track number and the time from the
beginning of the program are shown on the display.
When play of one disc ends, the first track of the following disc
starts. When play of the final disc ends, play of the first disc
starts again.
The player will skip any empty disc trays.

AUDIO
310(b) Playing a disc
G22050
Push the “DISC” button if discs are already loaded in the
player.
The “DVD CHANGER” screen appears on the display.
The discs set in the player are played continuously, starting
with the last disc you inserted. The disc number of the disc
currently being played, the track number and the time from the
beginning of the program are shown on the display.
When play of one disc ends, the first track of the following disc
starts. When play of the final disc ends, play of the first disc
starts again.
The player will skip any empty disc trays.(c) Selecting a desired disc
G22114
On the screen: Touch the desired disc number.
The selected disc number is highlighted in green.
The player will start playing the selected disc from the first
track.
On the audio panel: Push the “CH DISC
” o r “ ” button.
When you release the button, the player will start playing the
selected disc from the first track.

AUDIO
314(e) Operating a DVD video disc
NOTE: The playback condition of some DVD video discs
may be determined by a DVD video software producer.
This DVD player plays a disc as the software producer
intended. So some functions may not work properly. Be
sure to read the instruction manual for the DVD video disc
separately provided. For the detailed information about
DVD video discs, see “(h) DVD player and DVD video disc
information”
Precautions on DVD video disc
When recording with a DVD video or video CD, audio tracks
may not record in some cases while the menu is displayed. As
audio will not play in this case, verify that the video tracks are
playing and then activate playback.
When playback of a disc is completed:
If an audio CD is playing, the next CD will be selected and
playback will begin automatically.
If a DVD video or video CD is playing, playback will stop or
the menu screen will be displayed. The next disc will not
play back automatically. (Audio tracks cannot be heard
while the disc is stopped)
The title/chapter number and playback time display may not
appear while playing back certain DVD video discs.
CAUTION
Conversational speech on some DVDs is recorded at a
low volume to emphasize the impact of sound effects.
If you adjust the volume assuming that the
conversations represent the maximum volume level
that the DVD will play, you may be startled by louder
sound effects or when you change to a different audio
source. The louder sounds may have a significant
impact on the human body or pose a driving hazard.
Keep this in mind when you adjust the volume.

AUDIO
319 Changing the subtitle language—
G22037
Each time you touch “Sub title”, the language is selected
from the ones stored in the discs and changed.
To turn off the subtitle, touch “Hide”.
Touch “Back”, and the previous screen returns.Changing the audio language—
G22038
Each time you touch “Audio”, the language is selected
from the ones stored in the discs and changed.
Touch “Back”, and the previous screen returns.

AUDIO
320Changing the angle—
G22039
The angle can be selected for discs that are multi−angle
compatible when the angle mark appears on the display.
Each time you touch “Angle”, the angle changes.
Touch “Back”, and the previous screen returns.Setup menu—
G22040
The initial setting can be changed.
Audio language
You can change the audio language.
1. Touch “Audio Lang.”.
2. Touch the language you want to hear on the “Select
Audio Lang.” screen and “Enter”.
If you cannot find the language you want to hear on this screen,
touch “Others” and enter a language code. For the entry of
language code, see the following “Entry of language code—”
on page 322.

AUDIO
321
Subtitle language
You can change the subtitle language.
1. Touch “Subtitle Lang.”.
2. Touch a language you want to read on the “Select
Subtitle Lang.” screen and “Enter”.
If you cannot find the language you want to read on this screen,
touch “Others” and enter a language code. For the entry of
language code, see the following “Entry of language code—”
on page 322.
DVD language
You can change the language on the DVD video menu.
1. Touch “DVD Language”.
2. Touch the language you want to read on the “Select
DVD Language” screen and “Enter”.
If you cannot find the language you want to read on this screen,
touch “Others” and enter a language code. For the entry of
language code, see the following “Entry of language code—”
on page 322.
Angle mark
The multi−angle mark can be turned on or off on the
screen while the disc which is multi−angle compatible is
being played.
Each time you touch “Angle Mark”, the angle mark on the
display turns on or off alternately.
Parental
The level of viewer restrictions can be changed.
1. Touch “Parental”.
2. Touch the numbers of your personal code on the
“Enter personal code” screen and touch “Enter”. If you
enter the wrong numbers, touch “Clear” to delete the
numbers.
10 touches of “Clear” will initialize the personal code.
3. Touch a parental level (1−8) on the “Select Restriction
Level” and “Enter”.
When you touch “Default”, all the settings except “Parental”of
this menu will be initialized.