ECO mode Lexus GS300 2006 Interior Equipment

INTERIOR EQUIPMENT
100
ILLUMINATED ENTRY SYSTEM
G14029

1
Outer foot lights
2
Steering spot light
3
Seat spot lights
(with the interior light in “DOOR” position)
4
Selector lever spot light
5
Inside door handle lights
6
Door courtesy lights
7
Foot lights
8
Outer scuff lights
The outer foot lights, steering spot light and seat spot
lights will come on when you get close to the vehicle
(about 1 m (3 ft.) from the outside door handle), carrying
an electronic key, or open the door.* After all the doors are
closed, the lights remain on for about 15 seconds and then
fade out.** (For details, see “Outer foot lights” on page
208.)
NOTE:
*When you open a door other than the driver’s door, the seat
spot light near the door you opened comes on.
**The duration of lighting can be changed.
Ask your Lexus dealer for details.
However, in the following cases, the lights go out immediately:
All the doors are closed and the engine switch is selected
in “ACC” or “IG−ON” mode.
All the doors are locked.

INTERIOR EQUIPMENT
101 The foot lights and inside door handle lights will comes on
when any of the doors is/are opened or the engine switch
is in “IG−ON” mode. After all the doors are closed and the
engine switch is turned off, the lights remain on for about
15 seconds and then fade out.*
NOTE:
*The duration of lighting can be changed.
Ask your Lexus dealer for details.
However, the lights go out immediately when all the doors are
locked and the engine switch is turned off.
The intensity of the foot lights and inside door handle lights can
be changed with the instrument panel light control switch. The
lights will be turned off when the light control switch is turned
to minimum. (For details, see “Instrument panel light control”
on page 96.)
Outer scuff lights and courtesy lights
Outer scuff lights and courtesy lights will come on when any of
the doors is/are opened. After all the doors are closed, the
lights will turn off.Selector lever spot light
The selector lever spot light will come on when the engine
switch is selected in “ACC” or “IG−ON” mode. When the
selector lever is moved out of “P” position, the intensity of the
light will be reduced.
The intensity of the selector lever spot light can be changed
with the instrument panel light control switch. This light will be
turned off when the light control switch is turned to minimum.