Throttle LEXUS GS400 2000 Service Owner's Manual

SS0FP±01
SS±18
±
174 Author: Date:
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
Spark plug x Cylinder head1818013
Throttle body x Intake air connector2121015
Throttle body bracket x Cylinder head2121015
Throttle body bracket x Throttle body2121015
Throttle body gasket x Intake air connector2121015
Ignition coils and high±tension cord set assembly x Cylinder head8.08071 in.´lbf
PS pump rear stay x Manifold stay39.240029
PS pump rear stay x PS pump bracket39.240029
Camshaft position sensor x Cylinder head9.09080 in.´lbf
Crankshaft position sensor x Oil pump9.09080 in.´lbf

SS0C5±02
SS±42
± SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
198 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
AUTOMATIC TRANSMISSION
SERVICE DATA
Line pressure (Wheel locked)
Idling
D position
R position
Stall
D position
R position
395 ± 455 kPa (4.0 ± 4.6 kgf´cm2, 57 ± 65 psi)
0
1,200 ± 1,360 kPa (12.2 ± 13.8 kgf´cm
2, 174 ± 196 psi)
1,655 ± 1,960 kPa (16.9 ± 19.8 kgf´cm2, 240 ± 282 psi)
Engine stall revolution (D position)
1UZ±FE
2JZ±GE
2,250 ± 150 rpm
2,700 ± 150 rpm
Time lag N " D position
N " R positionLess than 1.2 seconds
Less than 1.5 seconds
Engine idle speed (N position and A/C OFF)
1UZ±FE
2JZ±GE
750 ± 50 rpm
700 ± 50 rpm
Drive plate runoutMax.
Torque converter clutch sleeve runout Max.
Torque converter clutch installation (Correct distance) 1UZ±FE
2JZ±GE0.20 mm (0.0079 in.)
0.30 mm (0.0118 in.)
More than 17.1 mm (0.673 in.)
More than 0.1 mm (0.004 in.)
Extension housing oil seal drive in depth from flat end2.0 mm (0.079 in.)
Shift schedule (1UZ±FE / NORM and PWR mode)
Differential gear ratio 3.266
D, 4 position
(Throttle valve fully opened) 1 "2
2 " 3
3 " 4
4 " 5
5 " 4
4 " 3
3 " 2
2 " 1
(Throttle valve fully closed) 4 " 5
5 " 4
3 position
(Throttle valve fully opened) 1 " 2
2 " 3
4 " 3
3 " 2
2 " 1
2 position
(Throttle valve fully opened) 1 " 2
3 " 2
2 " 1
L position
(Throttle valve fully opened) 2 " 1
63 ± 73 km/h (39 ± 45 mph)
93 ± 105 km/h (58 ± 65 mph)
143 ± 161 km/h (89 ± 100 mph)
209 ± 230 km/h (130 ± 143 mph)
202 ± 218 km/h (126 ± 135 mph)
135 ± 148 km/h (84 ± 92 mph)
79 ± 87 km/h (49 ± 54 mph)
42 ± 49 km/h (26 ± 30 mph)
33 ± 39 km/h (21 ± 24 mph)
24 ± 30 km/h (15 ± 19 mph)
63 ± 73 km/h (39 ± 45 mph)
93 ± 105 km/h (58 ± 65 mph)
152 ± 167 km/h (94 ± 104 mph)
79 ± 87 km/h (49 ± 54 mph)
42 ± 49 km/h (26 ± 30 mph)
63 ± 73 km/h (39 ± 45 mph)
103 ± 111 km/h (64 ± 69 mph)
42 ± 49 km/h (26 ± 30 mph)
17 ± 23 km/h (11 ± 14 mph)

± SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
SS±43
199 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) Shift schedule (1UZ±FE / SNOW mode)
Differential gear ratio 3.266
D, 4 position
(Throttle valve fully opened) 1 "2
2 " 3
3 " 4
4 " 5
5 " 4
4 " 3
3 " 2
2 " 1
(Throttle valve fully closed) 4 " 5
5 " 4
3 position
(Throttle valve fully opened) 1 " 2
2 " 3
4 " 3
3 " 2
2 " 1
2 position
(Throttle valve fully opened) 1 " 2
3 " 2
2 " 1
L position
(Throttle valve fully opened) 2 " 1
42 ± 56 km/h (26 ± 35 mph)
72 ± 89 km/h (45 ± 55 mph)
109 ± 135 km/h (68 ± 84 mph)
145 ± 174 km/h (90 ± 108 mph)
96 ± 119 km/h (60 ± 74 mph)
47 ± 64 km/h (29 ± 40 mph)
22 ± 32 km/h (17 ± 20 mph)
5 ± 10 km/h (3 ± 6 mph)
33 ± 39 km/h (21 ± 24 mph)
24 ± 30 km/h (15 ± 19 mph)
42 ± 56 km/h (26 ± 35 mph)
72 ± 89 km/h (45 ± 55 mph)
152 ± 167 km/h (94 ± 104 mph)
22 ± 32 km/h (17 ± 20 mph)
5 ± 10 km/h (3 ± 6 mph)
42 ± 56 km/h (26 ± 35 mph)
103 ± 111 km/h (64 ± 69 mph)
5 ± 10 km/h (3 ± 6 mph)
17 ± 23 km/h (11 ± 14 mph)
Shift schedule (2JZ±GE / NORM and PWR mode)
Differential gear ratio 3.916
D, 4 position
(Throttle valve fully opened) 1 "2
2 " 3
3 " 4
4 " 5
5 " 4
4 " 3
3 " 2
2 " 1
(Throttle valve fully closed) 4 " 5
5 " 4
3 position
(Throttle valve fully opened) 1 " 2
2 " 3
4 " 3
3 " 2
2 " 1
2 position
(Throttle valve fully opened) 1 " 2
3 " 2
2 " 1
L position
(Throttle valve fully opened) 2 " 1
53 ± 61 km/h (33 ± 38 mph)
81 ± 91 km/h (50 ± 57 mph)
124 ± 138 km/h (77 ± 86 mph)
177 ± 191 km/h (110 ± 119 mph)
171 ± 182 km/h (106 ± 113 mph)
112 ± 122 km/h (70 ± 76 mph)
63 ± 68 km/h (39 ± 42 mph)
34 ± 39 km/h (21 ± 24 mph)
39 ± 44 km/h (24 ± 27 mph)
22 ± 27 km/h (14 ± 17 mph)
53 ± 61 km/h (33 ± 38 mph)
81 ± 91 km/h (50 ± 57 mph)
129 ± 139 km/h (80 ± 86 mph)
63 ± 68 km/h (39 ± 42 mph)
34 ± 39 km/h (21 ± 24 mph)
53 ± 61 km/h (33 ± 38 mph)
87 ± 93 km/h (54 ± 58 mph)
34 ± 39 km/h (21 ± 24 mph)
16 ± 21 km/h (10 ± 13 mph)

SS±44
± SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
200 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) Shift schedule (2JZ±GE / SNOW mode)
Differential gear ratio 3.916
D, 4 position
(Throttle valve fully opened) 1 "2
2 " 3
3 " 4
4 " 5
5 " 4
4 " 3
3 " 2
2 " 1
(Throttle valve fully closed) 4 " 5
5 " 4
3 position
(Throttle valve fully opened) 1 " 2
2 " 3
4 " 3
3 " 2
2 " 1
2 position
(Throttle valve fully opened) 1 " 2
3 " 2
2 " 1
L position
(Throttle valve fully opened) 2 " 1
39 ± 50 km/h (24 ± 31 mph)
62 ± 74 km/h (39 ± 46 mph)
94 ± 112 km/h (58 ± 70 mph)
136 ± 157 km/h (85 ± 98 mph)
77 ± 91 km/h (48 ± 57 mph)
45 ± 55 km/h (28 ± 34 mph)
23 ± 31 km/h (14 ± 19 mph)
4 ± 8 km/h (2 ± 5 mph)
39 ± 44 km/h (24 ± 27 mph)
22 ± 27 km/h (14 ± 17 mph)
39 ± 50 km/h (24 ± 31 mph)
62 ± 74 km/h (39 ± 46 mph)
129 ± 139 km/h (80 ± 86 mph)
23 ± 31 km/h (14 ± 19 mph)
4 ± 8 km/h (2 ± 5 mph)
39 ± 50 km/h (24 ± 31 mph)
87 ± 93 km/h (54 ± 58 mph)
4 ± 8 km/h (2 ± 5 mph)
16 ± 21 km/h (10 ± 13 mph)
Lock±up point (1UZ±FE) (Throttle valve opening 5 %)
5th gear (D position) Lock±up ON
Lock±up OFF
4th gear (4 position) Lock±up ON
Lock±up OFF
58 ± 65 km/h (36 ± 40 mph)
55 ± 61 km/h (34 ± 38 mph)
140 ± 150 km/h (87 ± 93 mph)
133 ± 143 km/h (83 ± 89 mph)
Flex lock±up point (1UZ±FE) (Throttle valve opening 3 %)
D position (When accelerating) Lock±up ON
Lock±up OFF
4 position (When accelerating) Lock±up ON
Lock±up OFF
47 ± 53 km/h (29 ± 33 mph)
45 ± 51 km/h (28 ± 32 mph)
35 ± 41 km/h (22 ± 25 mph)
33 ± 39 km/h (21 ± 24 mph)
Lock±up point (2JZ±GE) (Throttle valve opening 5 %)
5th gear (D position) Lock±up ON
Lock±up OFF
4th gear (4 position) Lock±up ON
Lock±up OFF
56 ± 61 km/h (35 ± 38 mph)
54 ± 60 km/h (34 ± 37 mph)
56 ± 61 km/h (35 ± 38 mph)
54 ± 60 km/h (34 ± 37 mph)

± SERVICE SPECIFICATIONSAUTOMATIC TRANSMISSION
SS±45
201 Author: Date:
2000 LEXUS GS300/GS400 (RM718U) Flex lock±up point (2JZ±GE)
(Throttle valve opening 3 %)
D position (When accelerating)
5th gear Lock±up ON
Lock±up OFF
4th gear Lock±up ON
Lock±up OFF
4 position (When accelerating)
4th gear Lock±up ON
Lock±up OFF
(Throttle valve fully closed)
D position (When deceleration / A/C ON)
5th gear Lock±up ON
Lock±up OFF
4 position (When deceleration / A/C ON)
4th gear Lock±up ON
Lock±up OFF
D position (When deceleration / A/C OFF)
5th gear Lock±up ON
Lock±up OFF
4 position (When deceleration / A/C OFF)
4th gear Lock±up OFF
39 ± 44 km/h (24 ± 27 mph)
38 ± 43 km/h (24 ± 27 mph)
30 ± 34 km/h (19 ± 21 mph)
28 ± 33 km/h (17 ± 21 mph)
39 ± 44 km/h (24 ± 27 mph)
37 ± 42 km/h (23 ± 26 mph)
93 ± 102 km/h (58 ± 63 mph)
32 ± 53 km/h (20 ± 33 mph)
93 ± 102 km/h (58 ± 63 mph)
24 ± 40 km/h (15 ± 25 mph)
93 ± 102 km/h (58 ± 63 mph)
32 ± 37 km/h (20 ± 23 mph)
21 ± 28 km/h (13 ± 17 mph)

SS0FI±01
SS±8
± SERVICE SPECIFICATIONSENGINE MECHANICAL (2JZ±GE)
164 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
TORQUE SPECIFICATION
Part tightenedN´mkgf´cmft´lbf
No.3 timing belt cover x Cylinder head8.08071 in.´lbf
Intake air connector x Air intake chamber2828021
Throttle body bracket x Cylinder head2121015
Timing belt plate x Oil pump8.08071 in.´lbf
Idler pulley x Oil pump3535026
No.1 timing belt cover x Oil pump8.08071 in.´lbf
Camshaft timing pulley x Camshaft8181060
Straight screw plug x Camshaft timing pulley1515011
No.1 oil pipe x No.3 camshaft bearing cap5555041
Cylinder head cover x Cylinder head8.58575 in.´lbf
High±tension cord x Cylinder head cover8.08071 in.´lbf
Timing belt tensioner x Oil pump2727020
Crankshaft pulley x Crankshaft3303,300243
Drive belt tensioner x Cylinder head2121015
No.2 timing belt cover x Cylinder head8.08071 in.´lbf
PS pump front bracket x PS vane pump5859043
PS pump front bracket x Cylinder block5253038
Camshaft bearing cap x Cylinder head2020014
ECT sensor x Cylinder head19.620014
Engine hanger x Cylinder head4040030
Water outlet x Cylinder head2828021
Cylinder head x Cylinder head 1st
2nd
3rd35
Turn 90°
Turn 90°350
Turn 90°
Turn 90°26
Turn 90°
Turn 90°
No.3 camshaft bearing cap x Cylinder head Hexagon bolt5.05044 in.´lbf
No.4 timing belt cover x Cylinder head8.08071 in.´lbf
Cylinder head cover x Cylinder head8.58575 in.´lbf
Intake manifold x Cylinder head2828021
Manifold stay x Intake manifold4040030
Manifold stay x Cylinder block4040030
Vacuum control valve set x Intake manifold2121015
Exhaust manifold x Cylinder head4040830
Front exhaust pipe x Exhaust manifold4444032
Pipe support bracket x Transmission4444032
PS vane pump x Cylinder block57.959043
PS vane pump x A/C compressor57.959043
PS pump rear stay x PS pump bracket39.240029
PS pump rear stay x Manifold stay39.240030
Engine hanger x Cylinder head4040030
Rear support member x Body25.526019
Drive plate x Crankshaft8385061
Transmission x Cylinder block7273053
Starter x Transmission3738027
No.1 oil pan x Transmission3738027

SF0N1±03
± SFI (2JZ±GE)SFI SYSTEM
SF±1
1467 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
SFI SYSTEM
PRECAUTION
1. BEFORE WORKING ON FUEL SYSTEM, DISCON-
NECT NEGATIVE (±) TERMINAL CABLE FROM BAT-
TERY
HINT:
Any diagnostic trouble code retained by the ECM will be erased
when the battery negative (±) terminal cable is removed from
the battery.
Therefore, if necessary, read the diagnostic trouble code(s) be-
fore removing the negative (±) terminal cable from the battery.
2. DO NOT SMOKE OR WORK NEAR AN OPEN FLAME
WHEN WORKING ON FUEL SYSTEM
3. KEEP GASOLINE AWAY FROM RUBBER OR LEATH-
ER PARTS
4. MAINTENANCE PRECAUTIONS
(a) Precaution when the connecting gauge.
Use battery as the power source for the timing light, etc.
(b) In the event of engine misfire, these precautions should
be taken.
(1) Check proper connection of battery terminals, etc.
(2) Handle high±tension cords carefully.
(3) After repair work, check that the ignition coil termi-
nals and all other ignition system lines are recon-
nected securely.
(4) When cleaning the engine compartment, be espe-
cially careful to protect the electrical system from
water.
(c) Precautions when the handling heated oxygen sensors.
(1) Do not allow oxygen sensor to drop or hit against an
object.
(2) Do not allow the sensor to come into contact with
water.
5. IF VEHICLE IS EQUIPPED WITH MOBILE RADIO SYS-
TEM (HAM, CB, ETC.)
If the vehicle is equipped with a mobile communication system,
refer to the precaution in the IN section.
6. AIR INDUCTION SYSTEM
(a) Separation of the engine oil dipstick, oil filler cap, PCV
hose, etc. may cause the engine to run out of tune.
(b) Disconnection, looseness or cracks in the parts of the air
induction system between the throttle body and cylinder
head will cause air suction and cause the engine to run
out of tune.

SF151±01
B08999
N´m (kgf´cm, ft´lbf) : Specified torque

Non±reusable part
21 (210, 15)
21 (210, 15)
VSV Connector for EVAP
Camshaft Position Sensor Connector
No.2 Vacuum Pipe
Accelerator Cable
EVAP Hose
Noise Filter
Connector
Vacuum
Hose
Throttle Position
Sensor Connector

Gasket
PS Air Hose
Engine Wire Clamp

Gasket
Oil Dipstick and
Guide for A/T
Engine Wire
Clamp
42 (420, 31)
Fuel Pressure Pulsation Damper

Gasket

O±Ring
Fuel Inlet Pipe Delivery Pipe
21 (210, 15)
Spacer
Injector Connector
O±Ring
O±Ring
Injector

Insulator

Grommet
28 (280, 21)
Engine Cover
SF±20
± SFI (2JZ±GE)INJECTOR
1486 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
COMPONENTS

SF0NB±04
B01579
± SFI (2JZ±GE)INJECTOR
SF±21
1487 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
REMOVAL
1. REMOVE ENGINE COVER
Remove the 4 nuts and engine cover.
2. REMOVE AIR INTAKE CHAMBER (See page SF±46)
3. REMOVE FUEL PRESSURE PULSATION DAMPER
(See page SF±26)
4. REMOVE DELIVERY PIPE AND INJECTORS
NOTICE:

Be careful not to drop the injectors when removing
the delivery pipe.

Pay attention to put any hung load on the injector to
and from the side direction.
(a) Disconnect the 6 injector connectors.
(b) Disconnect the camshaft position sensor connector.
(c) Disconnect the throttle position sensor connector.
(d) Disconnect the VSV connector for EVAP.
(e) Remove the 3 bolts and delivery pipe together with the 6
injectors.
(f) Pull out the 6 injectors from the delivery pipe.
(g) Remove the O±rings, grommet and insulator from each
injector.
(h) Remove the 3 spacers from the intake manifold.

SF0ND±04
B01220
New Insulator
New O±Ring
New Grommet New O±Ring
B01571
Turn
Outward
Connector
B01580
RotateUpward SF±24
± SFI (2JZ±GE)INJECTOR
1490 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
INSTALLATION
1. INSTALL INJECTORS AND DELIVERY PIPE
(a) Install new insulator and grommet to each injector.
(b) Apply a light coat of spindle oil or gasoline to 2 new O±
rings and install them to each injector.
(c) Apply a light coat of spindle oil or gasoline on the place
where a delivery pipe touches an O±ring of the injector.
(d) While turning the injector clockwise and counterclock-
wise, push it to the delivery pipe. Install the 6 injectors.
(e) Position the injector connector outward.
(f) Place the 3 spacers in position on the intake manifold.
(g) Apply a light coat of spindle oil or gasoline on the place
where a intake manifold touches an O±ring of the injector.
(h) Place the 6 injectors together with the delivery pipe and
3 bolts in position on the intake manifold.
(i) Temporarily install the 3 bolts holding the delivery pipe to
the intake manifold.
(j) Check that the injectors rotate smoothly.
HINT:
If injectors do not rotate smoothly, the probable cause is incor-
rect installation of O±rings. Replace the O±rings.
(k) Position the injector connector upward.
(l) Connect the 6 injector connectors.
HINT:
The Nos.1, 3, 5 injector connectors and dark gray, and the
Nos.2, 4, 6 injector connectors are brown.
(m) Tighten the 3 bolts holding the delivery pipe to the intake
manifold.
Torque: 21 N´m (210 kgf´cm, 15 ft´lbf)
(n) Connect the camshaft position sensor connector.
(o) Connect the throttle position sensor connector.
(p) Connect the VSV connector for EVAP.
2. INSTALL FUEL PRESSURE PULSATION DAMPER
(See page SF±27)
3. INSTALL AIR INTAKE CHAMBER
(See page SF±49)
4. INSTALL ENGINE COVER
Install the engine cover with the 4 nuts.