height LEXUS GS400 2000 Service Owner's Manual

SA0SP±01
F03424
Upper Suspension Arm
64 (650, 47)
88 (900, 65)
18 (185, 13)
88 (900, 65)
Shock Absorber With
Coil Spring
Washer
Drive Shaft
Suspension Member Brace
110 (1,120, 81)
30 (305, 22)
289 (2,950, 213)
50 (510, 37)
X6
HID Type Headlight:
Height Control
Sensor Link
N´m (kgf´cm, ft´lbf) : Specified torque

Non±reusable part
Cotter Pin
Lock Cap
110 (1,120, 81)
110 (1,120, 81)
No.2 Lower Suspension Arm
83 (850, 61)
108 (1,100, 80)
75 (765, 55)
± SUSPENSION AND AXLEREAR UPPER SUSPENSION ARM
SA±93
2093 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
REAR UPPER SUSPENSION ARM
COMPONENTS

SA0ST±01
F03426
Fender Apron Seal
No.2 Lower
Suspension Arm
HID Type Headlight:
Height Control
Sensor Link
110 (1,120, 81)
30 (305, 22)
110 (1,120, 81)
110 (1,120, 81)
No.1 Lower Suspension Arm
75 (765, 55)
N´m (kgf´cm, ft´lbf): Specified torque
75 (765, 55)
± SUSPENSION AND AXLEREAR LOWER SUSPENSION ARM
SA±97
2097 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
REAR LOWER SUSPENSION ARM
COMPONENTS

SA0SU±01
F02385
F02386
F02387
SA±98
± SUSPENSION AND AXLEREAR LOWER SUSPENSION ARM
2098 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
REMOVAL
1. REMOVE REAR WHEEL
Torque: 103 N´m (1,050 kgf´cm, 76 ft´lbf)
2. REMOVE REAR FENDER APRON SEAL
3. REMOVE NO.1 LOWER SUSPENSION ARM
Remove the 2 bolts, nuts, and No.1 lower suspension arm.
Torque: 75 N´m (765 kgf´cm, 55 ft´lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nuts.
4. REMOVE NO.2 LOWER SUSPENSION ARM
(a) Halogen type headlight:
Remove the bolt, nut and disconnect the stabilizer bar link
from the No.2 lower suspension arm.
Torque: 30 N´m (305 kgf´cm, 22 ft´lbf)
(b) HID type headlight:
Remove the bolt, nut and disconnect the stabilizer bar link
and the height control link from the No.2 lower suspen-
sion arm.
Torque: 30 N´m (305 kgf´cm, 22 ft´lbf)
(c) Remove the bolt, nut and disconnect the shock absorber
from the No.2 lower suspension arm.
Torque: 110 N´m (1,120 kgf´cm, 81 ft´lbf)
HINT:
At the time of installation, after stabilizing the suspension,
torque the nut.