key LEXUS GS400 2000 Service Owner's Manual

BE±164
± BODY ELECTRICALWIRELESS DOOR LOCK CONTROL SYSTEM
2465 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
Within
3 secs.
Turn the ignition switch from ON to LOCK at approx. 1 sec. interval 1 to 5 times to select the mode.
Pull out the key plate from the ignition key cylinder.
When add mode or rewrite mode
is selected.When confirmation
mode is selected.
ON
ONON
LOCK
LOCKLOCK
Approx.
1 sec.Approx.
1 sec. Approx. 1 sec.Approx.
1 sec.Approx.
1 sec.
Add mode
Rewrite modeConfirmation mode
ON ± LOCK change occurs 1 time
ON ± LOCK change occurs 2 timesON ± LOCK change occurs 3 times
MPX body ECU automatically performs
the LOCK±UNLOCK operation once
or twice at 1 sec. interval to iniform the
operator that either the add mode or
rewrite mode has been selected.
LOCK±UNLOCK occurs once
LOCK±UNLOCK occurs twice
Indicates that add mode has been selected.
Indicates that rewrite mode has been
selected.
1 sec.
LOCK
1 sec.1 sec.
LOCK
UNLOCK
UNLOCK
LOCK
2 secs.2 secs.
UNLOCK MPX body ECU automatically performs the
LOCK±UNLOCK operation 1 to 4 times at
2 sec. interval to inform the operator of
the number of the registered codes.
HINT:
When the number of the registered code
is 0, the operation is automatically
performed 5 times.
Example:
When the operation is performed twice, it
directs that 2 types of recognition code
have been registered.
1st time 2nd time
Registration of recognition code (Confirmation
mode and prohibition mode) is completed.
ON
LOCK
Approx.
1 sec.Approx.
1 sec.
Prohibition mode
ON ± LOCK change occurs 5 times
When prohibition
mode is selected.

± BODY ELECTRICALWIRELESS DOOR LOCK CONTROL SYSTEM
BE±165
2466 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
MPX body performs LOCK±UNLOCK operation 5 times at a 1 sec.
interval to inform the operator that prohibition mode has been selected.
Press again either one of 3 switches on the transmitter for more than 1 sec.
MPX body ECU automatically performs LOCK±UNLOCK operation once or
twice at a 1 sec. interval to inform the operator that the receiver has received the
signal from the transmitter.
LOCK±UNLOCK occurs once
LOCK±UNLOCK occurs twice Registration of recognition code is completed
Registration of recognition code has not been completed.

Recognition code received first time and second time did not match.
Proceed to continue registration
If even one of the following conditions is satisfied, registration of recognition
codes is completed.

40 secs. elapses since the MPX body ECU response.

The driver's door is closed.

The key plate is inserted in the ignition key cylinder.

4 type recognition codes are registration at one time.
Registration of recognition codes (add mode or rewrite mode) is completed.
Within
3 secs.Within
40 secs.
ON
LOCK
Approx.
1 sec.Approx.
1 sec.
When prohibition
mode is selected.
Press the lock and unlock switches on the transmitter simultaneously within 1 sec.
If LOCK±UNLOCK operation can not be performed at all, the mode returns to the
normal mode, then start with ºStart registration of recognition codeº.
Proceed to finish registration
Within 40 secs.

I07735
± BODY ELECTRICALAUDIO SYSTEM
BE±191
2492 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
2. DIAGNOSIS FUNCTION (PIONEER made)
Error codes over tuner and connected equipment are displayed on the screen of tuner.
(a) Diagnosis start±up
For shifting to diagnosis mode, push ºCDº switch 3 times with pressing º1º and º6º of PRESET switch
at the same time while the audio power is OFF and ACC is ON.
To exit from diagnosis mode, press ºCDº switch for 2 seconds or turn the ignition key OFF.
(When º1±190º is displayed, the mode is transferred to LAN check mode.)
(b) LAN check
When starting up the diagnosis mode, the mode turns to LAN check mode, the screen displays the
code numbers (physical address) of tuner and connected equipment. Smaller codes are displayed in
order, displayed code numbers are switched by operating TUNE ºUPº or ºDOWNº switch. In LAN check
mode, by pressing º5º of PRESET switch for more than 2 secs., diagnosis memory of each equipment
can be deleted, when deletion is completed, the mode returns to LAN check mode.
Code No. (physical address) List
Code No. (physical address)Equipment name
190Radio receiver assembly (Audio head unit)
240CD changer (in Luggage room)
360CD changer (in center console and glove compartment box)
440Power amplifier
(c) System check
When pressing º1º of PRESET switch in LAN check mode, the mode turns to the system check
mode, the system performs self diagnosis of connected equipment and displays the re-
sults.(ºSYSº (showing the system is under detection) is displayed.)
Perform the operation shown in the following illustration, then read the result of the inspection.

V08418
Turn ignition Key from LOCK position to ACC position.
Troubleshooting for ANTI±THEFT SYSTEM
Display A:
ID Number is set.Display E:
ANTI±THEFT SYSTEM opera-
tion condition. (ID number input
error 10 times or more.)Display B
ºSECº display disappears after 1
second.Radio switch ON.
Take to designated radio
service station.Display BDisplay D
Refer to each
malfunction item.Normal
operation.
Radio switch ON. Normal operation.
Cancel ID number, refer to each malfunction item.
Ye s
No
OK
NG
ANTI±THEFT SYSTEM operation condition. (ID number input error 9 times or less.)
Input ID number to cancel ANTI±THEFT SYSTEM, and check display.
Display A"B Display B Display E
Display C"A
Radio switch ON.Refer to each
malfunction item.Take to designated
radio service station.ANTI±THEFT SYSTEM not can-
celled. (ID number input error 10
times or less.)
Display D
ANTI±THEFT SYSTEM cancelled.
Check audio system again.Normal operation.
OK
NG
Cancel ID number, refer to each malfunction item.
Liquid Crystal Display (LCD) or VFD for Audio System
Display ºAº Display ºBº Display ºCº
Display ºDº Example:Display ºEº
2 DIN Type
1 DIN TypeBlank
No Illumination
2 DIN Type
1 DIN Type 2 DIN Type
1 DIN Type Error Times2 DIN Type 1 DIN Type
Radio Display
1 DIN Type 2 DIN Type
HINT:

Refer to Owner's Manual for operation details of ANTI±THEFT SYSTEM.

When the ID number has been cancelled, reset the same number after completing the operation, or
inform the customer that it has been cancelled.
± BODY ELECTRICALAUDIO SYSTEM
BE±197
2498 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)

BE0G7±07
START
Insert the key in the key cylinder.
Under registration
Registration completion
Remove the key.
Will you register the
next key?
NoSecurity indicator blinks until the first
key is inserted. The indicator light
lights up after the key registration.
Security Indicator ON
Security Indicator
OFF
END Ye s
Security Indicator ON
(After the last key (sub±key)
has been registered, the indi-
cator goes off.)
BE±238
± BODY ELECTRICALENGINE IMMOBILISER SYSTEM
2539 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
ENGINE IMMOBILISER SYSTEM
REGISTRATION PROCEDURE
1. KEY REGISTRATION IN AUTOMATIC REGISTRATION MODE
(a) Registration of a new transponder key.
HINT:

This must be done when you install a new ECM.

The new ECM is in the automatic key code registration mode. The already fixed number of key codes
for this ECM can be registered.
On this type of vehicle, up to 3 key codes can be registered.

In the automatic registration mode, the key registered last becomes the sub±key.

1.2 Sec.
0.8 Sec.
0.25 Sec. 0.5 Sec.0.25 Sec.
1 Sec. Blinks
Code 2±1 Code2±2
0.25 Sec.
0.25 Sec.0.5 Sec. 1 Sec.
± BODY ELECTRICALENGINE IMMOBILISER SYSTEM
BE±239
2540 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
HINT:

When a key is not inserted in the key cylinder in the automatic registration mode, the security indicator
always lights on.

When the immobiliser system operates normally and the key is pulled out, the security indicator blinks.

When key code registration could not be performed in the automatic registration mode, code 2±1 is
output from the security indicator and when inserting the already registered key, code 2±2 is output.
(b) Automatic registration mode completion
If completing the mode forcibly when more than 1 key code have been registered in the automatic reg-
istration mode, perform the following procedures.
After 1 more key code have been registered with master key, perform step (1) or (2) without pulling
the key out or inserting the already registered key.
(1) Depress and release brake pedal 5 times or more within 15 sec.
(2) With the LEXUS hand±held tester, require automatic registration mode completion.

I04311
I04312
BE±240
± BODY ELECTRICALENGINE IMMOBILISER SYSTEM
2541 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
2. KEY REGISTRATION PROCEDURE WHEN KEY OR KEY CYLINDER HAS BEEN REPLACED.
HINT:
Key registration procedure of new master key and new sub±key on this vehicle when new ignition cylinder
and key set, and new lock cylinder set including ignition key cylinder are installed is described below.
(a) Removing wire±less and immobiliser module from origi-
nal master key.
(b) Making new master key.
After replacing and installing new ignition cylinder, install
the removed original modules into new 2 key housings as
supply parts.
(c) Registration of supplied new sub±key and /or master key
Register supplied new sub±key and /or master key by us-
ing new master key.
(See step 3 and 4)
NOTICE:
In case of replacing ignition cylinder and key set, door
locks cannot be opened with new ignition keys. Therefore,
to avoid any trouble caused by empty battery of transmitter
of new ignition key, please bring the original key while driv-
ing.

Will you register the
next key?
No Ye s
Insert already registered master key in the key
cylinder
Depress and release the acceleration pedal 5
times.
Depress and release the brake pedal 6 times,
and remove the master key.
Insert key to be registered in key cylinder.
Depress and release the acceleration pedal 1
time. (Security indicator blinks.)
The registration mode completes when pulling
out the key and depressing and releasing the
brake pedal once or more within 10 secs. after
indicator has been OFF or 10 sec. have passed. Within 10 sec.Within 15 sec.
Within 20 sec.
Within 10 sec.
Within 10 sec.
After 60 sec. additional master key is registered.
(Security indicator is OFF.)
± BODY ELECTRICALENGINE IMMOBILISER SYSTEM
BE±241
2542 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
(d) There are 2 ways for registration of additional master key, one way is depressing brake pedal and ac-
celeration pedal and the other way is using LEXUS hand±held tester.
HINT:

It is possible to register up to 7 master key codes including the already registered key code.

When any operation time described below is over, registration mode completes.

When the next procedure is performed while the timer is working, the timer completes counting time,
then next timer starts.

When replacing ºIgnition Cylinder Key Setº or ºLock Cylinder Setº register according to the following
procedure using the original master key. However, after the registration of the additional master key,
as the original master key and the original sub±key are not necessary any more, erase registered of
those key codes.
(1) Depressing brake pedal and acceleration pedal:

Will you register the
next key?
Insert already registered master key in the key cylinder.
Using LEXUS hand±held tester select master key regis-
tration.
Remove the master key.
Insert key to be registered in key cylinder.
(Security indicator blinks.)
After 60 sec., additional master key is registered.
(Security indicator OFF.)
No Ye s Within
10 sec.Within 120 sec.
Within 20 sec.
Within 10 sec.
The registration mode completes when pulling
out the key and depressing and releasing the
brake pedal once or more within 10 secs. after
indicator has been OFF or 10 sec. have passed.
BE±242
± BODY ELECTRICALENGINE IMMOBILISER SYSTEM
2543 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
(2) Using LEXUS hand±held tester:

Will you register the
next key?
No Ye s
Insert already registered master key in the key
cylinder
Depress and release the acceleration pedal 4
times.
Depress and release the brake pedal 5 times,
and remove the master key.
Insert key to be registered in key cylinder.
Depress and release the acceleration pedal 1
time. (Security indicator blinks.)
Within 10 sec.Within 15 sec.
Within 20 sec.
Within 10 sec.
Within 10 sec.
After 60 sec. additional sub±key is registered.
(Security indicator is OFF.)
The registration mode completes when pulling
out the key and depressing and releasing the
brake pedal once or more within 10 secs. after
indicator has been OFF or 10 sec. have passed.
± BODY ELECTRICALENGINE IMMOBILISER SYSTEM
BE±243
2544 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
3. REGISTRATION OF ADDITIONAL SUB±KEY
There are 2 ways for registration of additional sub±key, one way is depressing brake pedal and acceleration
pedal and the other way is using LEXUS hand±held tester.
HINT:

It is possible to register up to 3 sub±key codes including the already registered key code.

When any operation time described below is over, registration mode completes.

When the next procedure is performed while the timer is working, the timer completes counting time,
then next timer starts.
(1) Depressing brake pedal and acceleration pedal: