fuse chart LEXUS GS400 2000 Service Repair Manual

Only specific window does not operate. (Neither manual nor automatic operation is available.)1
Diagnosis check:
Check output diagnosis trouble codes 21 ± 26 when operating the
master switch and power window switch.
(Refer to ºMultiplex Communication Systemº)If the door lock of the applicable seat operates.
Wire harness faulty or
D FR DOOR fuse faulty.
No Yes
Disconnect the driver door control ECU connector.
Ye sNo
Voltage check:
With ignition switch ON if 10 to 14 V power is
supplied to PCT (3) of power window switch.Wire harness faulty.
(Between master switch W/L2 terminal
(10) and power window switch PCT
terminal (3)
Continuity check:
Master switch faulty.
Check continuity master switch and power window switch.No (Driver side)
No (Except driver side)Ye s
No Ye s
Wire harness check:
Master switch
Master switch Driver door control ECU
AUTO (7)
DDN (18)
DUP (6)AUTO (B6)
MDN (B4)
MUP (B5)
Power window switch
Power window switch Driver door control ECU
A (5)
D (4)
U (6)AUTO (A22)
MDN (A23)
MUP (A24)
Wire harness faulty.
Continuity check:
Check continuity between UP terminal (A2) and
GND terminal (C12), DN terminal (A11) and
GND terminal (C12) of driver door control ECU .
Ye s
When replacing with the normal driver door control ECU
removed from another seat, if it operates normally.
Driver door control ECU faulty.No Yes
Driver door control ECU faulty.
No
Power window motor check:
Disconnect the motor connector.
Connect the battery positive (+) lead to terminal
UP (2) and negative (±) lead to terminal DN
(1) of wire harness side motor connector, check that
the motor operates.
Check power window motor.Ye s
No
Wire harness faulty.
Ye s
Power window motor faulty.
No
BE±112
± BODY ELECTRICALPOWER WINDOW CONTROL SYSTEM
2413 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
FLOW CHART