park assist LEXUS GS400 2000 Service Repair Manual

± ENGINE MECHANICAL (2JZ±GE)VALVE CLEARANCE
EM±9
1363 Author: Date:
2000 LEXUS GS300/GS400 (RM718U)
15. REINSTALL SPARK PLUGS
16. REINSTALL IGNITION COILS AND HIGH±TENSION
CORD SET ASSEMBLY (See page IG±9)
17. REINSTALL NO.3 TIMING BELT COVER
(a) Install the gasket to the timing belt cover.
(b) Using a 5 mm hexagon wrench, install the timing belt cov-
er with the 4 bolts.
Torque: 8.0 N´m (80 kgf´cm, 71 in.´lbf)
(c) Install the oil filler cap.
18. REINSTALL THROTTLE BODY AND INTAKE AIR CON-
NECTOR ASSEMBLY
(a) Install a new gasket to the air intake chamber.
(b) Place the throttle body together with the intake air con-
nector on the cylinder head.
(c) Connect the vacuum hose (from actuator for ACIS) to the
No.1 vacuum pipe.
(d) Connect the 2 water bypass hoses to the throttle body.
(e) Install the 4 bolts and 2 nuts holding the intake air connec-
tor to the air intake chamber.
Torque: 28 N´m (280 kgf´cm, 21 ft´lbf)
(f) Install the 2 nuts holding the throttle body bracket to the
cylinder head.
Torque: 21 N´m (210 kgf´cm, 15 ft´lbf)
(g) Connect the air assist hose to the intake air connector.
(h) Install the PCV hose to the intake air connector.
(i) Install the EVAP hose (from charcoal canister) to the VSV
for EVAP.
(j) Install the vacuum hose (from No.2 vacuum pipe) to the
No.1 vacuum pipe.
(k) Install the throttle position sensor connector.
(l) Install the accelerator pedal position sensor connector.
(m) Install the throttle control motor connector.
(n) Install the VSV connector for EVAP.
(o) Secure the engine wire with the clamp on the throttle body
bracket.
(p) Install the engine wire clamp with the clamp bracket of the
throttle body.
(q) Connect the accelerator cable to the throttle body.
19. REINSTALL INTAKE AIR RESONATOR
20. REINSTALL ENGINE COVER
Install the engine cover with the 4 nuts.
21. REFILL WITH ENGINE COOLANT
22. START ENGINE AND CHECK FOR LEAKS