CD player Lexus GS430 2006 Scheduled Maintenance Guide / LEXUS 2006 GS430/GS300 FROM JAN. 2005 PROD. (OM30649U) Owner's Guide

AUDIO
311
(d) Operating an audio CD
Playing an audio CD—
G22062
Push the
“AUDIO” button to display this screen. You can
operate the switches and choose the number of the disc
you want to play. The selected disc is automatically
played. Selecting a desired track—
G22112
“SEEK TRACK” button:
Use for direct access to a desired
track.
Push the “SEEK TRACK
” or “ ” button and hold it until the
desired track number appears on the display. As you release
the button, the player will start playing the selected track from
the beginning.
Fast forward: Touch the “
” switch and hold it to fast forward
the disc. When you release the switch, the player will resume
playing from that position.
Reverse: Touch the “
” switch and hold it to reverse the disc.
When you release the switch, the player will resume playing.

AUDIO
312Searching for a desired track or a disc—
G22061
Touch the “SCAN” switch.
The bar on the upper side will be highlighted in yellow. The
player
will play the next track for 10 seconds, then scan again.
To select a track, touch the “SCAN” switch a second time. If
the player reaches the end of the disc, it will continue scanning
at track 1.
After all the tracks are scanned in one pass, normal play
resumes.
Touch the “DISK SCAN” switch.
The bar on the upper side will be highlighted in yellow. The
program at the beginning of each disc will be played for 10
seconds. To continue listening to the program of your choice,
touch the “DISC SCAN” switch a second time.
After all the audio disc are scanned in one pass, normal play
resumes. Other functions—
G22111
“RPT”
switch: Use it for automatic repeat of the track you are
currently listening to.
Touch the switch while the track is playing. When the track is
finished, the player will automatically go back to the beginning
of the track and play the track again. To cancel it, touch the
switch once again.
“DISC RPT” switch: Use it for automatic repeat of the disc
you are currently listening to.
Touch the switch while the disc is playing. When the disc is
finished, the player will automatically go back to the beginning
of the disc and play the disc again. To cancel it, touch the
switch once again.
“RAND” switch: Use it for automatic and random selection
of the disc which you are currently listening to.

AUDIO
314(e) Operating a DVD video disc
NOTE: The playback condition of some DVD video discs
may be determined by a DVD video software producer.
This DVD player plays a disc as the software producer
intended. So some functions may not work properly. Be
sure to
read the instruction manual for the DVD video disc
separately provided. For the detailed information about
DVD video discs, see “(h) DVD player and DVD video disc
information”
Precautions on DVD video disc
When recording with a DVD video or video CD, audio tracks
may not record in some cases while the menu is displayed. As
audio will not play in this case, verify that the video tracks are
playing and then activate playback.
When playback of a disc is completed:
If an audio CD is playing, the next CD will be selected and
playback will begin automatically.
If a DVD video or video CD is playing, playback will stop or
the menu screen will be displayed. The next disc will not
play back automatically. (Audio tracks cannot be heard
while the disc is stopped)
The title/chapter number and playback time display may not
appear while playing back certain DVD video discs.
CAUTION
Conversational speech on some DVDs is recorded at a
low volume to emphasize the impact of sound effects.
If you adjust the volume assuming that the
conversations represent the maximum volume level
that the DVD will play, you may be startled by louder
sound effects or when you change to a different audio
source. The louder sounds may have a significant
impact on the human body or pose a driving hazard.
Keep this in mind when you adjust the volume.

AUDIO
318Selecting a menu item—
G22035
Enter
the menu item using “ \f”, “ ”, “
” or “ ” switches
and touch “Enter”. The p layer starts playing video for that
menu item. (For details, see the manual that comes with
the DVD video disc provided separately.)
Each time you touch“Move Buttons” switch, the switches
on the screen move upward and downward.
When you touch “OFF” switch, the displayed switches are not
displayed. To display them again, touch “ON” switch.
Touch “Back”, and the previous screen returns. Searching by title—
G22036
Enter the title number using “–”, “+” and “+10” swi\
tches
and touch “Enter”. The player starts playing video for that
title number.
When you push “SEEK TRACK
” or “ ” button, you can
select a chapter.
Touch “Back”, and the previous screen returns.

AUDIO
327
“
Page 2” switch: Use this switch to display the operation
switches on the second page.
“Page 1” switch: Use this switch to display the operation
switches on the top page.
“Hide Buttons” switch: Use this switch to turn off the
operation switches from the display.
If “
” appears on the display when you touch the switch, the
operation is not permitted. Description of each switch—
Switches on top page
“Select Number” switch: The track or number search screen
appears. (See “Searching by track” that follows.)
“Prev. Menu” switch: When you touch this switch while the
disc menu is displayed, the previous page appears on the
screen. If you touch this switch while the player is playing
video, the previous track is searched and played.
“Next Menu” switch: When you touch this switch while the
disc menu is displayed, the next page appears on the display.
If you touch this switch while the player is playing video, the
next track is searched and played.
“Main/Sub” switch: A multiplex transmission changing
switch. The mode changes from Main/Sub to Main, to Sub and
back to Main/Sub by touching this switch.

AUDIO
328
Switches on second page
“
” switch: Use this switch to pause the video screen.
When you touch this switch again, the video screen advance
frame by frame.
“ ” switch: Touch this switch to fast reverse during
playback.
“  ” switch: Touch this switch during pause to resume
playing.
“  ” switch: Touch this switch to fast forward during the
playback and start playing slowly during pause. Searching by track—
G22045
Enter the track numbers using “–”, “+” and “+10”
switches and touch “Enter”. The player starts playing
video for that title number.
You can select a track number by pushing “SEEK TRACK
”
or “ ” button.
Touch “Back”, and the previous screen returns.

AUDIO
329
(g) If the player malfunctions
If the player or another unit equipped with the player
malfunction, your audio system
will display one of the six
following messages.
If “DISC CHECK” appears on the display: It indicates that
the disc is dirty, damaged, or it was inserted upside down.
Clean the disc or insert it correctly.
If “NO DISC” appears on the display: It indicates that there
is no disc in the DVD player.
If “REGION CODE ERROR” appears on the display: It
indicates that the DVD region code is not set properly.
If “DVD ERROR” appears on the display: It indicates that the
inside of the player unit may be too hot due to the very high
ambient temperature. Eject a disc from the player and allow the
player to cool down.
If the malfunction is not rectified: Take your vehicle to your
Lexus dealer. (h) DVD player and DVD video disc information
DVD video discs—
This
DVD player conforms to NTSC color TV formats. The
DVD video disc conforming to another formats such as
PAL or SECAM cannot be used.
Region codes: Some DVD video discs have a region code
indicating a country where you can use the DVD video disc on
this DVD player . If the DVD video disc is not labeled as “ALL”
or “1”, you cannot use it on this DVD player. If you attempt to
play an inappropriate DVD video disc on this player , “REGION
CODE ERROR” appears on the screen. Even if the DVD video
disc does not have a region code, there is a case that you
cannot use it.
Marks shown on DVD video discs:
Indicates NTSC format of color TV.
Indicates the number of audio tracks.
Indicates the number of language
subtitles.
Indicates the number of angles.

AUDIO
330
Indicates the screen to be selected.
Wide screen: 16 : 9
Standard: 4 : 3
Indicates a region code by which this
video disc can be played.
ALL: in all countries
Number: region code
DVD video disc glossary—
DVD video discs: Digital versatile disc that holds video. DVD
video discs have adopted “MPEG2”, one of the world
standards of digital compression technologies. The picture
data is compressed by 1/40 on average and stored. Variable
rate encoded technology in which the volume of data assigned
to the picture is changed depending on the picture format has
also been adopted. Audio data is stored using PCM and Dolby
digital, which enables higher quality of sound. Furthermore,
multi−angle and multi −language features will also help you
enjoy the more advanced technology of DVD video.
Viewer restrictions: This feature limits what can be viewed
in conformity with a level of restrictions of the country. The level
of restrictions varies depending on the DVD video disc. Some
DVD video discs cannot be played at all, or violent scenes are
skipped or replaced with other scenes.
Level 1: DVD video discs for children can be played.
Level 2 − 7: DVD video discs for children and G−rated movie
can be played.
Level 8: All types of the DVD video discs can be played.
Multiangle feature: You can enjoy the same scene at
different angles.
Multilanguage feature: You can select a language of the
subtitle and audio.
Region codes: The region codes are provided on DVD
players and DVD discs. If the DVD video disc does not have
the same region code as the DVD player, you cannot play the
disc on the DVD player. For region codes, see page 329.

AUDIO
331
Audio:
This DVD player can play liner PCM, Dolby digital and
MPEG audio format DVD. Other decoded type cannot be
played.
Title and chapter: Video and audio programs stored in DVD
video disc are divided in parts by title and chapter.
Title: The largest unit of the video a nd audio programs stored
on DVD video discs. Usually, one piece of movie, one album,
or one audio program is assigned as a title.
Chapter: The unit smaller than that of title. A title comprises
plural chapters.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic”, and the doubleD symbol are
trademarks of Dolby Laboratories. Confidential
unpublished works.
19921997 Dolby Laboratories. All rights reserved.
This product incorporates copyright protection
technology that is protected by method claims of certain
U.S. patents and other intellectual property rights owned
by Macrovision Corporation and other rights owners. Use
of this copyright protection technology must be
authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembly is prohibited.
“DTS” is a trademark of Digital Theater Systems, Inc.
Audio remote control (steering switches)
G22051
The steering switches are installed on the left side of the
steering wheel.
“MODE” switch: Use this switch to change the mode. If a tape
or disc is not inserted, the “TAPE” or “DISC” mode is skipped.
When you push the switch with the audio system turned off, the
audio system turns on.
“VOL” switches: Use these switches to adjust the volume.
Push “ +” to increase the volume and “ – ” to decrease th\
e
volume. The volume continues to increase or decrease while
the switch is being pressed.

AUDIO
332(a) When the radio mode is selected
“
” or “ ”
switch: Push this switch for seek tuning or to
select a station.
 Push this switch briefly to select a station that you assigned
to a switch on the audio system.
 Push this switch and hold it until you hear a beep. The radio
will begin seeking up or down for a station, and will stop on
reception.
(b) When the “TAPE” mode is selected
“
” or “ ” switch: Push this switch to fast forward, rewind
the tape or for automatic program selection.
 Push this switch until you hear a beep to fast forward or
rewind the tape. To stop fast forwarding or rewinding, push
the same side on the switch until you hear a beep.
 Push this switch briefly for automatic program selection.
When automatically selecting a program, you can skip up to
9 programs at a time. For details, see page 299 for details.
(c) When the “DISC” mode is selected

“
” or “ ” switch: Use this switch to select a desired track
or disc.
 Push this switch briefly to select a desired track.
 Push and hold this switch until you hear a beep to select a
desired disc.
“
” or “ ”
switch: Use this switch to select a desired track,
disc or chapter.
 Push this switch br iefly to select a desired track or chapter.
 Push and hold this switch until you hear a beep to select a
desired disc.
CAUTION
Operate the steering switches with due care while you
are driving to avoid accidents.