high beam Lexus GX460 2012 User Guide

230
2-3. Operating the lights and windshield wipers
GX460_U.S.A. (OM60J00U)
●In the situations below, the system may not be able to correctly detect the sur-
rounding brightness levels, and may flash or expose nearby pedestrians to the
high beam. Therefore, you should consider turning the high beam on or off
manually rather than relying on the Automatic High Beam system.
• In bad weather (rain, snow, fog, sandstorms etc.)
• The windshield is obscured by fog, mist, ice, dirt etc.
• The windshield is cracked or damaged.
• The inside rear view mirror or camera sensor is deformed or dirty.
• Surrounding brightness levels are equal to those of headlights, tail lights orfog lights.
• Vehicles ahead have headlights that are either switched off, dirty, are chang-
ing color, or are not aimed properly.
• When driving through an area of intermittently changing brightness and darkness
• When frequently and repeatedly driving ascending/descending roads, or roads with rough, bumpy or uneven surfaces (such as stone-paved roads,
gravel tracks etc.)
• When frequently and repeatedly taking curves or driving on a winding road
• There is a highly reflective object ahead of the vehicle, such as a sign or a mir- ror.
• The vehicle’s headlights are damaged or dirty.
• The vehicle is listing or tilting, due to a flat tire, a trailer being towed etc.
• The Automatic High Beam indicator is flashing.
• The high beam and low beam are repeatedly being switched between in an abnormal manner.
• The driver believes that the high beam may be causing problems or distress to other drivers or pedestrians nearby.

231
2-3. Operating the lights and windshield wipers
2
When driving
GX460_U.S.A. (OM60J00U)
■If the Automatic High Beam indicator flashes...
It may indicate a malfunction in the system. Contact your Lexus dealer.
■Temporary lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
To lower the sensitivity, push and hold the “AUTO” button on the inside rear view
mirror for 15 to 20 seconds, and release. The indicator light on the inside rear view
mirror will flash to indicate that the sensitivity has been lowered.
When the “ENGINE START STOP” switch is turned off, the sensitivity will be
returned to its normal level.
■Customization that can be configured at your Lexus dealer
The Automatic High Beam can be turned off.

232
2-3. Operating the lights and windshield wipers
GX460_U.S.A. (OM60J00U)
NOTICE
■Camera sensor
●Do not touch the camera sensor.
●Do not subject the inside rear view mirror or the camera sensor to a strong
impact.
●Do not disassemble the camera sensor.
●Do not spill liquid onto the inside rear view mirror or the camera sensor.
●Do not apply window tinting or stickers to the camera sensor or the area of wind-
shield near the camera sensor.
●Do not place items on the dashboard. There is a possibility that the camera sensor
will mistake items reflected in the windshield for streetlights, the headlights of
other vehicles, etc.
●Do not install a parking tag or any other accessories near or around the inside
rear view mirror and the camera sensor.
●Do not overload the vehicle.
●Do not modify the vehicle.
●Do not replace windshield with a non-genuine windshield.
Contact your Lexus dealer.
Observe the following to ensure that the
Automatic High Beam functions correctly.

651
4-3. Do-it-yourself maintenance
4
Maintenance and care
GX460_U.S.A. (OM60J00U)
6SUB BATT30 ATo w i n g
7IG220 AInjector, ignition, meter
8HORN10 AHorn
9EFI25 AEFI ECU, A/F heater relay, fuel pump
relay, EFI NO.2
10A/F20 AA/F SSR
11FUEL OPN 10 AFuel lid opener
12S/HTR RR20 ARear seat heater
13FOLD SEAT LH30 AFolding seat (left)
14FOLD SEAT RH30 AFolding seat (right)
15TOW I N G TA I L30 ATo w i n g
16A/C COMP10 AAir conditioning system
17STRG HTR 10 ASteering heater
18CDS FAN20 ACondenser fan
19STOP10 A
Stop lights, high mount stop light, stop
light switch, VSC ECU, towing, Smart
access system with push button start
20AIR SUS NO.27. 5 AAIR SUS ECU
21H-LP RH-HI15 AHeadlight high beam (right)
22H-LP LH-HI15 AHeadlight high beam (left)
FuseAmpereCircuit

662
4-3. Do-it-yourself maintenance
GX460_U.S.A. (OM60J00U)
Light bulbs
You may replace the following bulbs by yourself. The difficulty level of
replacement varies depending on the bulb. If necessary bulb replacement
seems difficult to perform, contact your Lexus dealer.
For more information about replacing other light bulbs, contact your Lexus
dealer.
■ Prepare a replacement light bulb
Check the wattage and color of the light bulb being replaced.
(→ P. 763)
■ Remove the engine compartment cover
→ P. 6 1 0
■ Front bulb locations
Headlight low beam
(halogen bulb)
Headlight high beam
and daytime running lights
Parking/front side marker light
Front turn signal light
Fog light

665
4-3. Do-it-yourself maintenance
4
Maintenance and care
GX460_U.S.A. (OM60J00U)■
Headlight high beams and daytime running lights
Turn the bulb base counterclock-
wise.
Unplug the connector while push-
ing the lock release.
STEP1
STEP2

672
4-3. Do-it-yourself maintenance
GX460_U.S.A. (OM60J00U)Remove the light bulb.
■ Lights other than the above
If any of the lights listed below has burnt out, have it replaced by your
Lexus dealer.
●Headlight low beams (high-intensity discharge bulbs)
● Side turn signal lights
● High mounted stoplight
● Stop/tail lights
● License plate light
● Outer foot light
STEP3

5
When trouble arises
691
5-2. Steps to take in an emergency
GX460_U.S.A. (OM60J00U)
*: If equipped
Warning lightWarning light/Details
(Flashing)
“AFS OFF” indicator light*
Indicates a malfunction in the AFS (Adaptive Front-lighting
System). ( →P. 223)
(Flashing)
Automatic High Beam indicator light*
Indicates a malfunction in the automatic high beam system.
(→ P. 2 2 6 )
(Flashing)
“LDA” indicator light*
Indicates a malfunction in the lane departure alert.
(→ P. 2 7 5 )
(Flashing)
Cruise control indicator light*
Indicates a malfunction in the cruise control system.
(→ P. 2 4 6 , 2 5 0 )
(Flashing)
Radar cruise control indicator light*
Indicates a malfunction in the Dynamic radar cruise control
system. ( →P. 2 5 0 )
Kinetic dynamic suspension system warning light
Malfunction in the kinetic dynamic suspension system.
(Flashing)
Multi-terrain Select indicator light*
Indicates a malfunction in the Multi-terrain Select system.
(→ P. 2 9 6 )
Low speed four-wheel drive indicator light
Indicates a malfunction in the four-wheel drive system if the
light continues flashing. ( →P. 3 2 2 )
Center differential lock indicator light
Indicates a malfunction in the four-wheel drive system if the
light continues flashing. ( →P. 3 2 2 )

763
6-1. Specifications
6
Vehicle specifications
GX460_U.S.A. (OM60J00U)
Light bulbs
A: HB3 halogen bulbsB: D4S discharge bulbs
C: H11 halogen bulbs D: Wedge base bulb (amber)
E: Wedge base bulb (clear)
*:If equipped
Light bulbsBulb No.WTy p e
Exterior
Headlights
High beam
Low beam (discharge bulbs
*)
Low beam (halogen bulbs
*)
9005 
6035
55A B
C
Front turn signal lights21D
Parking/front side marker
lights5E
Front fog lights55C
Rear turn signal lights21D
Back-up lights92116E
Rear side marker lights5E
Running board lights5E
Interior
Personal/Interior lights Front
Rear

5
5E
E
Vanity lights8E
Door courtesy lights5E

791
6-2. Customization
6
Vehicle specifications
GX460_U.S.A. (OM60J00U)
Automatic
light con-
trol system
(
→P. 2 1 9 )
LIGHT SEN-
SOR SENSI-
TIVITY
(Adjust the sen-
sitivity of the
ambient light
sensor)
Standard-2 to 2O–OO
DAYTIME
RUNNING
LIGHTS
(Daytime run-
ning lights can
be disabled)
*2
OnOffO–OO
Automatic high
beam system
*3OnOff–––O
Ti m e e l a p s e d
before head-
lights automati-
cally turn on or
off (When the
headlight switch
is in “AUTO”
position)
StandardLong–––O
ItemFunctionDefault settingCustomized setting