navigation system Lexus GX460 2014 Navigation Manual

237
4. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
GX_EMVN_OM60K84U_(U)13.07.02 11:50
4
AUDIO/VIDEO SYSTEM
1Select Apps mode on the source screen
to display the control screen.
■CONTROL SCREEN
1Display the audio source selection
screen. ( →P.231)
2Select “DISC”.
zEven the “DISC” button is pressed, the
mode can be changed to the DISC mode.
■ CONTROL SCREEN
■ CONTROLLERUSING THE RADIO (INTERNET
RADIO BROADCAST)
One of Apps’s features is the ability to
listen to internet radio. In order to use
this service, an Apps compatible phone
and the navigation system needs to be
set. ( →P.354)
PLAYING AN AUDIO CD/CD
TEXT
No.Function
Select to set repeat playback.
Select to set random playback.
No.Function
Press to play/pause.
Press to fast forward/rewind.
zPress to select a track.
z Press and hold to fast forward/
rewind.
GX_EMVN_OM60K84U_(U).book Page 237 Tuesday, July 2, 2013 11:51 AM

280
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1. VOICE COMMAND SYSTEM OPERATION
1. VOICE COMMAND SYSTEM
Talk switch
zPress the talk switch to start the voice com-
mand system.
z To cancel voice recognition, press and hold
the talk switch. z
It is unnecessary to speak directly into the
microphone when giving a command.
The voice command system enables the
navigation, audio/visual, hands-free and
air conditioning systems to be operated
using voice commands.
Refer to the command list for samples of
voice commands. ( →P.289)
USING THE VOICE
COMMAND SYSTEM
STEERING SWITCH
MICROPHONE
INFORMATION
●
Wait for the confirmation beep before
speaking a command.
●Voice commands may not be recognized
if:
• Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice com- mands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned towards the microphone.
●In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise, such as wind noise.
GX_EMVN_OM60K84U_(U).book Page 280 Tuesday, July 2, 2013 11:51 AM

282
1. VOICE COMMAND SYSTEM OPERATION
GX_EMVN_OM60K84U_(U)13.07.02 11:50
■DISPLAYING THE “Voice Settings”
SCREENS
zSelecting can be displayed the
“Voice Settings” screen.
INFORMATION
●
If the navigation system does not respond
or the confirmation screen does not dis-
appear, press the talk switch and try
again.
●If a voice command cannot be recog-
nized, voice guidance will say “Pardon?”
(“Command not recognized.” will be dis-
played on the screen) and voice com-
mand reception will restart.
●If a voice command cannot be recog-
nized 2 consecutive times, the voice
command guidance system will say
“Paused. To restart voice recognition,
push the talk switch. To cancel voice rec-
ognition, press and ho ld the talk switch.”
Then voice recognition will be sus-
pended.
●“Voice Recognition Prompts” can be set
to on or off on the “Voice Settings”
screen. ( →P. 6 2 )
●Voice guidance can be canceled by set-
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk switch
and hearing a beep.
GX_EMVN_OM60K84U_(U).book Page 282 Tuesday, July 2, 2013 11:51 AM

289
1. VOICE COMMAND SYSTEM OPERATION
GX_EMVN_OM60K84U_(U)13.07.02 11:50
5
VOICE COMMAND SYSTEM
3. COMMAND LIST
zFrequently used commands are lis ted in the following tables.
z For devices that are not installed in the ve hicle, the related commands will not be dis-
played in the shortcut menu screen. Also , according to conditions, other commands
may not be displayed in the shortcut menu screen.
z The functions available may vary accordin g to the navigation system installed.
XBasic
X Apps
When the voice recognition language is set to English.
X Navi
*: For example; Gas stations, Restaurants, etc.
Recognizable voice commands and their actions are shown below.
zVoice recognition language can be changed. ( →P. 5 5 )
CommandAction
“Help”Prompts voice guidance to offer examples of commands
or operation methods
“Go Back”Returns to the previous screen
“Go to ”Displays the command list of the selected tab
CommandAction
“Launch ”Activates the LEXUS Ap p Suite application
CommandAction
“Find Nearby ”Displays a list of near the current position
“Enter an Address”Enables setting a destination by saying the address
“Go Home”Displays the route to home
“Cancel Route”Stops the route guidance
GX_EMVN_OM60K84U_(U).book Page 289 Tuesday, July 2, 2013 11:51 AM

309
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX_EMVN_OM60K84U_(U)13.07.02 11:50
7
PHONE
4. RECEIVING ON THE Bluetooth® PHONE
1Select or press the switch on
the steering wheel to talk on the phone.
To refuse to receive the call : Select
or press the switch on the steering
wheel.
To adjust the volume of a received call :
Turn the “PWR·VOL” knob, or use the vol-
ume control switch on the steering wheel.
INCOMING CALLS
When a call is received, this screen is
displayed with a sound.
INFORMATION
●
During international phone calls, the
other party’s name or number may not be
displayed correctly depending on the
type of cellular phone you have.
●The incoming call display mode can be
set. ( →P.335)
●The ringtone that has been set in the
“Sound Settings” screen sounds when
there is an incoming call. Depending on
the type of Bluetooth
® phone, both the
navigation system and Bluetooth® phone
may sound simultaneously when there is
an incoming call. ( →P. 3 2 1 )
GX_EMVN_OM60K84U_(U).book Page 309 Tuesday, July 2, 2013 11:51 AM

313
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX_EMVN_OM60K84U_(U)13.07.02 11:50
7
PHONE
6. Bluetooth® PHONE MESSAGE FUNCTION
1Press the button.
2Select .
zThe phone top screen can be displayed by
pressing the
switch on the steering
wheel.
3Check that the message inbox screen is
displayed.
: Select to change to phone mode.
Received messages can be forwarded
from the connected Bluetooth
® phone,
enabling checking and replying using
the navigation system.
Depending on the type of Bluetooth
®
phone connected, received messages
may not be transferred to the message
inbox.
If the phone does not support the mes-
sage function, this function cannot be
used.
FunctionPage
Receiving a message314
Checking messages315
Replying to a message (quick reply)316
Calling the message sender318
Message settings333
GX_EMVN_OM60K84U_(U).book Page 313 Tuesday, July 2, 2013 11:51 AM

314
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX_EMVN_OM60K84U_(U)13.07.02 11:50
RECEIVING A MESSAGE
When an e-mail/SMS/MMS is re-
ceived, the incoming message screen
pops up with sound and is ready to be
operated on the screen.
No.Function
Select to check the message.
Select to not open the message.
Select to call th e message sender.
INFORMATION
●
Depending on the cellular phone used for
receiving messages, or its registration
status with the navigation system, some
information may not be displayed.
●The pop up screen is separately available
for incoming e-mail and SMS/MMS mes-
sages under the follo wing conditions:
E-mail:
• “Incoming E-mail Display” is set to “Full
Screen”. ( →P. 3 3 3 )
• “E-mail Notification Popup” is set to on. (→ P. 3 3 3 )
SMS/MMS:
• “Incoming SMS/MMS Display” is set to “Full screen”. ( →P. 3 3 3 )
• “SMS/MMS Notification Popup” is set to on. ( →P. 3 3 3 )
GX_EMVN_OM60K84U_(U).book Page 314 Tuesday, July 2, 2013 11:51 AM

317
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
7
PHONE
GX_EMVN_OM60K84U_(U)13.07.02 11:50
■EDITING QUICK REPLY MESSAG-
ES
1Select “Quick Msg” .
2Select corresponding to the de-
sired message to edit.
3Select “OK” when editing is completed.
This operation cannot be performed
while driving.
INFORMATION
●
To reset the edited quick reply messages,
select “Default” .
●“Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”) :
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.
GX_EMVN_OM60K84U_(U).book Page 317 Tuesday, July 2, 2013 11:51 AM

8
343
1
2
3
4
5
6
7
8
GX_EMVN_OM60K84U_(U)13.06.28 16:22
1. FUNCTIONAL OVERVIEW............... 344
2. TYPE A: FUNCTION ACHIEVED BY USING A CELLULAR
PHONE.................................................... 345
BEFORE USING THE FUNCTION .............. 347
PREPARATION BEFORE USING
LEXUS App Suite................................................ 348
3. TYPE B: FUNCTION ACHIEVED BY USING DCM AND THE
NAVIGATION SYSTEM ................... 350
BEFORE USING THE FUNCTION ............... 351
4. TYPE C: FUNCTION ACHIEVED BY USING DCM .................................. 353 1. LEXUS App Suite..................................... 354
USING LEXUS App Suite .................................. 354
LINKING LEXUS App Suite AND
NAVIGATION LOCAL FUNCTION ..... 359
App Suite KEYBOARD OPERATION ........ 362
2. Destination Assist..................................... 364
MAKE A CALL WITH Destination Assist ......................................................................... 364
3. eDestination............................................... 366
DOWNLOADING eDestinations ................. 366
SEARCHING eDestinations ............................. 368
DISPLAYING eDestination ICONS ............. 369
4. Lexus Insider .............................................. 370
NEW MESSAGE NOTIFICATION.............. 370
VIEWING AND PLAYING RECEIVED Lexus Insider MESSAGES ................................ 371
1. LEXUS App Suite SETTINGS.............. 374
SCREEN FOR LEXUS App Suite
SETTINGS .............................................................. 375
1LEXUS ENFORM WITH SAFETY
CONNECT OVERVIEW2LEXUS ENFORM WITH SAFETY
CONNECT OPERATION
3SETUP
LEXUS ENFORM WITH SAFETY CONNECT
GX_EMVN_OM60K84U_(U).book Page 343 Tuesday, July 2, 2013 11:51 AM

344
GX_EMVN_OM60K84U_(U)13.07.02 11:50
1. LEXUS ENFORM WITH SAFETY CONNECT OVERVIEW
1. FUNCTIONAL OVERVIEW
zThe functions included in Lexus Enform with Safety Connect are classified into the fol-
lowing three types.
Type A: Function achieved by using a cellular phone
Type B: Function achieved by using an em bedded cellular device in the vehicle
(DCM: Data Communica tion Module) and the navigation system
Type C: Function achieved by using DCM
z Each function is available in the following areas:
• LEXUS App Suite is available in the 48 stat es, D.C. and Alaska of the United States.
• Destination Assist and eDestination are av ailable in the contiguous United States.
• Lexus Insider is available in the contiguous 48 states and Canada.
• Safety Connect includes four features. Automatic Collision Notification, Emergency Assistance and Stolen Vehicle Location
are available in the United States, including Hawaii and Alaska, and in Canada, and
Enhanced Roadside Assistance is available in the United States (except Hawaii) and in
Canada.
Lexus Enform with Safety Connect is a feat ure that includes LEXUS App Suite, Desti-
nation Assist, eDestination, Lexus Insider, and Safety Connect.
FunctionType
LEXUS App SuiteType A
Destination AssistType B
eDestinationType B
Lexus InsiderType B
Safety ConnectType C
INFORMATION
●
The actual service availability is depe ndent on the cellular network condition.
GX_EMVN_OM60K84U_(U).book Page 344 Tuesday, July 2, 2013 11:51 AM