navigation system Lexus GX460 2015 Navigation Manual

237
4. REAR SEAT ENTERTAINMENT SYSTEM OPERATION
GX460_Navi_OM60L77U_(U)14.06.02 10:48
4
AUDIO/VISUAL SYSTEM
■CONTROLLER
1Select Apps mode on the source screen
to display the control screen.
■CONTROL SCREEN
1Display the audio source selection
screen. ( →P.231)
2Select “DISC” .
zEven the “DISC” button is pressed, the
mode can be changed to the DISC mode.
No.Function
Press and hold fast rewinds continu-
ously
Pauses the playback (To restart, se-
lect “” )
Press and hold fast forwards contin-
uously
USING THE RADIO (INTERNET
RADIO BROADCAST)
One of Apps’s features is the ability to
listen to internet radio. In order to use
this service, an Apps compatible phone
and the navigation system needs to be
set. (→P.356)
PLAYING AN AUDIO CD/CD
TEXT
GX_Navi_OM60L77U_(U).book Page 237 Monday, June 2, 2014 10:49 AM

280
GX460_Navi_OM60L77U_(U)14.06.02 10:48
1. VOICE COMMAND SYSTEM OPERATION
1. VOICE COMMAND SYSTEM
Talk switch
zPress the talk switch to start the voice com-
mand system.
z To cancel voice recognition, press and hold
the talk switch. z
It is unnecessary to speak directly into the
microphone when giving a command.
The voice command system enables the
navigation, audio/visual, hands-free and
air conditioning systems to be operated
using voice commands.
Refer to the command list for samples of
voice commands. ( →P.289)
USING THE VOICE
COMMAND SYSTEM
STEERING SWITCH
MICROPHONE
INFORMATION
●
Wait for the confirmation beep before
speaking a command.
●Voice commands may not be recognized
if:
•Spoken too quickly.
• Spoken at a low or high volume.
• The roof or windows are open.
• Passengers are talking while voice com- mands are spoken.
• The air conditioning speed is set high.
• The air conditioning vents are turned towards the microphone.
●In the following conditions, the system
may not recognize the command prop-
erly and using voice commands may not
be possible:
• The command is incorrect or unclear.Note that certain words, accents or
speech patterns may be difficult for the
system to recognize.
• There is excessive background noise, such as wind noise.
GX_Navi_OM60L77U_(U).book Page 280 Monday, June 2, 2014 10:49 AM

282
1. VOICE COMMAND SYSTEM OPERATION
GX460_Navi_OM60L77U_(U)14.06.02 10:48
■DISPLAYING THE “Voice Settings”
SCREENS
zSelecting can be displayed the
“Voice Settings” screen.
INFORMATION
●
If the navigation system does not respond
or the confirmation screen does not dis-
appear, press the talk switch and try
again.
●If a voice command cannot be recog-
nized, voice guidance will say “Pardon?”
(“Command not recognized.” will be dis-
played on the screen) and voice com-
mand reception will restart.
●If a voice command cannot be recog-
nized 2 consecutive times, the voice
command guidance system will say
“Paused. To restart voice recognition,
push the talk switch. To cancel voice rec-
ognition, press and hold the talk switch.”
Then voice recognition will be sus-
pended.
●“Voice Recognition Prompts” can be set
to on or off on the “Voice Settings”
screen. ( →P. 6 2 )
●Voice guidance can be canceled by set-
ting voice prompts to off. Use this setting
when it is desirable to say a command
immediately after pressing the talk switch
and hearing a beep.
GX_Navi_OM60L77U_(U).book Page 282 Monday, June 2, 2014 10:49 AM

289
1. VOICE COMMAND SYSTEM OPERATION
GX460_Navi_OM60L77U_(U)14.06.02 10:48
5
VOICE COMMAND SYSTEM
3. COMMAND LIST
zFrequently used commands are listed in the following tables.
z For devices that are not installed in the vehicle, the related commands will not be dis-
played in the shortcut menu screen. Also, according to conditions, other commands
may not be displayed in the shortcut menu screen.
z The functions available may vary according to the navigation system installed.
XBasic
X Apps
When the voice recognition la nguage is set to English.
Recognizable voice commands and their actions are shown below.
zVoice recognition language can be changed. (→ P. 5 5 )
CommandAction
“Help”Prompts voice guidance to offer examples of commands
or operation methods
“Go Back”Returns to the previous screen
“Go to ”Displays the command list of the selected tab
“More Hints”Displays more commonly used commands
“Cancel”Cancels the voice command system
CommandAction
“Launch ”Activates the LEXUS App Suite application
GX_Navi_OM60L77U_(U).book Page 289 Monday, June 2, 2014 10:49 AM

293
GX460_Navi_OM60L77U_(U)14.06.02 10:48
5
VOICE COMMAND SYSTEM
2. MOBILE ASSISTANT OPERATION
1. MOBILE ASSISTANT
1Press and hold this switch until you hear
the beeps.
2The Mobile Assistant can be used only
when the following screen is displayed.
zTo cancel the Mobile Assistant, select
“Cancel” , or press and hold the on the
steering wheel.
z To restart the Mobile Assistant for addi-
tional commands, press the on the
steering wheel.
• Mobile Assistant can only be restarted
after the system responds to a voice com-
mand. • After some phone and music commands,
the Mobile Assistant feature will automat-
ically end to complete the requested
action.
The Mobile Assistant feature will
activate Apple’s Siri® Eyes Free mode
via the steering wheel switches. To
operate the Mobile Assistant, a
compatible cellular phone must be
registered and connected to this system
via Bluetooth
®. ( → P.40)
zThe volume of the Mobile Assistant can
be adjusted using the “PWR/VOL” knob
or steering wheel volume control
switches. The Mobile Assistant and
phone call volumes are synchronized.
INFORMATION
●
The available features and functions may
vary based on the iOS version installed
on the connected device.
●Some Siri features are limited in Eyes
Free mode. If you attempt to use an
unavailable function, Siri will inform you
that the function is not available.
●If Siri is not enabled on the cellular phone
connected via Bluetooth®, an error mes-
sage will be displayed on the screen.
●While a phone call is active, the Mobile
Assistant cannot be used.
●If using the navigation feature of the cellu-
lar phone, ensure the active audio source
is Bluetooth
® audio or iPod in order to
hear turn by turn direction prompts.
GX_Navi_OM60L77U_(U).book Page 293 Monday, June 2, 2014 10:49 AM

311
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX460_Navi_OM60L77U_(U)14.06.02 11:29
7
PHONE
4. RECEIVING ON THE Bluetooth® PHONE
1Select or press the switch on
the steering wheel to talk on the phone.
To refuse to receive the call : Select
or press the switch on the steering
wheel.
To adjust the volume of a received call :
Turn the “PWR/VOL” knob, or use the vol-
ume control switch on the steering wheel.
INCOMING CALLS
When a call is received, this screen is
displayed with a sound.
INFORMATION
●
During international phone calls, the
other party’s name or number may not be
displayed correctly depending on the
type of cellular phone you have.
●The incoming call display mode can be
set. ( →P. 3 3 7 )
●The ringtone that has been set in the
“Sound Settings” screen sounds when
there is an incoming call. Depending on
the type of Bluetooth
® phone, both the
navigation system and Bluetooth® phone
may sound simultaneously when there is
an incoming call. ( →P.323)
07-1.fm Page 311 Monday, June 2, 2014 11:30 AM

315
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX460_Navi_OM60L77U_(U)14.06.02 11:29
7
PHONE
6. Bluetooth® PHONE MESSAGE FUNCTION
1Press the button.
2Select .
zThe phone top screen can be displayed by
pressing the
switch on the steering
wheel.
3Check that the message inbox screen is
displayed.
: Select to change to phone mode.
Received messages can be forwarded
from the connected Bluetooth® phone,
enabling checking and replying using
the navigation system.
Depending on the type of Bluetooth
®
phone connected, received messages
may not be transferred to the message
inbox.
If the phone does not support the mes-
sage function, this function cannot be
used.
FunctionPage
Receiving a message316
Checking messages317
Replying to a message (quick reply)318
Calling the message sender320
Message settings335
07-1.fm Page 315 Monday, June 2, 2014 11:30 AM

316
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
GX460_Navi_OM60L77U_(U)14.06.02 11:29
RECEIVING A MESSAGE
When an e-mail/SMS/MMS is re-
ceived, the incoming message screen
pops up with sound and is ready to be
operated on the screen.
No.Function
Select to check the message.
Select to not open the message.
Select to call the message sender.
INFORMATION
●
Depending on the cellular phone used for
receiving messages, or its registration
status with the navigation system, some
information may not be displayed.
●The pop up screen is separately available
for incoming e-mail and SMS/MMS mes-
sages under the following conditions:
E-mail:
• “Incoming E-mail Display” is set to “Full Screen”. ( →P.335)
• “E-mail Notification Popup” is set to on. (→ P. 3 3 5 )
SMS/MMS:
• “Incoming SMS/MMS Display” is set to “Full screen”. ( →P.335)
• “SMS/MMS Notification Popup” is set to on. ( →P.335)
07-1.fm Page 316 Monday, June 2, 2014 11:30 AM

319
1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
7
PHONE
GX460_Navi_OM60L77U_(U)14.06.02 11:29
■EDITING QUICK REPLY MESSAG-
ES
1Select “Quick Msg” .
2Select corresponding to the de-
sired message to edit.
3Select “OK” when editing is completed.
This operation cannot be performed
while driving.
INFORMATION
●
To reset the edited quick reply messages,
select “Default” .
●“Quick Message 1” (“I am driving and
will arrive in approximately [ETA]
minutes.”) :
This message cannot be edited and will
automatically fill in [ETA] with the
navigation calculated estimated time of
arrival on the confirm message screen.
If there are waypoints set, [ETA] to the
next waypoint will be shown.
If there is no route currently set in the
navigation system, “Quick Message 1”
cannot be selected.
07-1.fm Page 319 Monday, June 2, 2014 11:30 AM

8
345
1
2
3
4
5
6
7
8
GX460_Navi_OM60L77U_(U)14.05.27 10:31
1. FUNCTIONAL OVERVIEW............... 346
2. TYPE A: FUNCTION ACHIEVED BY USING A
CELLULAR PHONE ........................... 347
BEFORE USING THE FUNCTION ............. 349
PREPARATION BEFORE USING
LEXUS App Suite................................................ 350
3. TYPE B: FUNCTION ACHIEVED BY USING DCM AND THE
NAVIGATION SYSTEM ................... 352
BEFORE USING THE FUNCTION ............. 353
4. TYPE C: FUNCTION ACHIEVED BY USING DCM .................................. 355 1. LEXUS App Suite..................................... 356
USING LEXUS App Suite .................................. 356
LINKING LEXUS App Suite
AND NAVIGATION LOCAL
FUNCTION ............................................................ 361
App Suite KEYBOARD OPERATION ....................................................... 364
2. Destination Assist..................................... 366
MAKE A CALL WITH
Destination Assist ................................................ 366
3. eDestination............................................... 368
DOWNLOADING eDestinations ................. 368
SEARCHING eDestinations ............................. 370
DISPLAYING eDestination ICONS ............... 371
4. Lexus Insider .............................................. 372
NEW MESSAGE NOTIFICATION............... 372
VIEWING AND PLAYING RECEIVED Lexus Insider MESSAGES ............................... 373
1. LEXUS App Suite SETTINGS .............. 376
SCREEN FOR LEXUS App Suite SETTINGS ............................................................... 377
1
LEXUS ENFORM SAFETY
CONNECT AND
APP SUITE-OVERVIEW
2
LEXUS ENFORM SAFETY
CONNECT AND
APP SUITE OPERATION
3SETUP
LEXUS ENFORM, SAFETY CONNECT AND APP SUITE
GX_Navi_OM60L77U_(U).book Page 345 Monday, June 2, 2014 10:49 AM