CD player Lexus GX470 2005 Engine / LEXUS 2005 GX470 (OM60B11U) Workshop Manual

AUDIO
371
(f) Changing the initial setting (video CD only)

1Remote control button
2Screen switch
Push the ªSET UPº button on the remote control or the
ªSet Upº switch on the screen, and the initial setting
screen
will appear. You can change the initial setting. (See
ª(k) Changing the initial settingº on page 353 for details.)
After the setting is done, the player plays from the beginning
of the chapter or the track. (g) Using the control screen22PY095

1For video CD2For audio CD
3For CD text

AUDIO
372When
playing a disc, push the ªDVDº button on the remote
control. The control screen will appear on the screen.
CD text only Ð The CD title and track title will appear on the
screen when pushing the ªDVDº button.
Details of the specific switches, controls and features are
described below.
ªPICTUREº switch (video CD only): Push the ªPICTUREº
switch to turn off the control screen and return to the picture
previously displayed.
ªRPTº switch (audio CD and CD text): Push the ªRPTº
switch while the track is playing. When the track ends, it will
automatically replay. To turn off the repeat feature, push this
switch again.
ªRANDº switch (audio CD and CD text): Push the ªRANDº
switch. The player will play the tracks on the CD in random
order. To turn off the random feature, push this switch again.
ªSCANº switch (audio CD and CD text): Push the ªSCANº
switch. The player will scan all the tracks on the CD. To stop
scanning, push this switch again. When the player has
scanned all the tracks on the CD, it will stop scanning.
ª
º and ªº switches: Push the ªº or ªº switch
to fast forward or reverse the disc. When you push the switch
again, the DVD player will resume playing. (h) Error messages
If the player malfunctions, your audio system will display one
of the three following error messages.
If ªDISC CHECKº appears on the screen:
It indicates that the
disc is dirty, damaged or it was inserted upside down. Clean
the disc or insert it correctly.
If ªREGION CODE ERRORº appears on the screen: It
indicates that the DVD region code is not set properly.
If ªDVD ERRORº appears on the screen: There is a problem
inside the player. Eject the disc. Set the disc again.
If the malfunction still exists, take your vehicle to your Lexus
dealer.

AUDIO
375
DVD video disc information
(a) DVD player and DVD video discs
This DVD player conforms to NTSC color TV formats. DVD
video discs conforming to other formats such as PAL or
SECAM cannot be used.
Region codes: Some DVD video discs have a region code
indicating where you can use. If the DVD video disc is not
labeled ªALLº or ª1º, you cannot use it in this DVD player. If you
attempt to play an inappropriate DVD video disc in this player,
ªREGION CODE ERRORº appears on the screen. Even if the
DVD video disc does not have a region code, in some cases
you cannot use it. Marks shown on DVD video discs:
Indicates NTSC format of color TV.
Indicates the number of audio
tracks.
Indicates the number of language
subtitles.
Indicates the number of angles.
Indicates the screen to be selected.
Wide screen: 16:9
Standard: 4:3
Indicates regions in which this video
disc can be played.
ALL: all countries
Number: region code

AUDIO
376(b) DVD video disc glossary
DVD video discs: Digital V
ersatile Disc that holds video. DVD
video discs have adopted ªMPEG2º, one of the world
standards of digital compression technologies. The picture
data is compressed by 1/40 on average and stored. Variable
rate encoded technology in which the volume of data assigned
to the picture is changed depending on the picture format has
also been adopted. Audio data is stored using PCM and Dolby
digital, which enables higher quality of sound. Furthermore,
multi±angle and multi±language features will also help you
enjoy the more advanced technology of DVD video.
Viewer restrictions: This feature limits what can be viewed in
conformity with the level of restrictions of the country. The level
of restrictions varies depending on the DVD video disc. Some
DVD video discs cannot be played at all, or violent scenes are
skipped or replaced with other scenes.
Level 1: DVD video discs for children can be played.
Level 2 Ð 7: DVD video discs for children and G±rated movies
can be played.
Level 8: All types of DVD video discs can be played.
Multi±angle feature: You can enjoy the same scene at
different angles.
Multi±language feature: You can select the language of the
subtitles and audio. Region codes:
Region codes are provided on DVD players
and DVD discs. If the DVD video disc does not have the same
region code as the DVD player, you cannot play the disc on the
DVD player. For region codes, see page 375.
Audio: This DVD player can play liner PCM, Dolby digital, dts
and MPEG audio format DVD. Other decoded type cannot be
played.
Title and chapter: Video and audio programs stored on DVD
video discs are divided in parts by title and chapter.
Title: The largest unit of the video and audio programs stored
on DVD video discs. Usually, one piece of a movie, one album,
or one audio program is assigned as a title.
Chapter: A unit smaller than a title. A title comprises plural
chapters.

AUDIO
383
AUDIO/VIDEO SYSTEM OPERATINGHINTS
NOTICE
To ensure correct audio/video system operation:
Be careful not to spill beverages over the system.
Do not put anything other than a cassette tape or CD
into the slot.
Do not put anything other than a DVD video, DVDaudio, video CD, dts±CD and audio CD into the DVDplayer.
The use of a cellular phone inside or near the vehiclemay cause a noise from the speakers of the system
which you are listening to. However, this does notindicate a malfunction.

AUDIO
385
AM
Fading Ð AM broadcasts are reflected by the upper
atmosphere Ð especially at night. These reflected signals can
interfere with those received directly from the radio station,
causing
the radio station to sound alternately strong and weak.
Station interference Ð When a reflected signal and a signal
received directly from a radio station are very nearly the same
frequency, they can interfere with each other, making it dif ficult
to hear the broadcast.
Static Ð AM is easily affected by external sources of electrical
noise, such as high tension power lines, lightening, or electrical
motors. This results in static.
Caring for your cassette player and tapes
For the best performance for your cassette player and tapes:
Clean the tape head and other parts regularly.
 A dirty tape head or tape path can decrease sound quality
and tangle your cassette tapes. The easiest way to clean
them is by using a cleaning tape. (A wet type is
recommended.) Use high±quality cassettes.

Low±quality cassette tapes can cause many problems,
including poor sound, inconsistent playing speed, and
constant auto±reversing. They can also get stuck or tangled
in the cassette player.
 Do not use a cassette if it has been damaged or tangled or
if its label is peeling off.
 Do not leave a cassette in the player if you are not listening
to it, especially if it is hot outside.
 Store cassettes in their cases and out of direct sunlight.
 Avoid using cassettes with a total playing time longer than
100 minutes (50 minutes per side). The tape used in these
cassettes is thin and could get stuck or tangled in the
cassette player.
Caring for your CD player, DVD player and CDs
 Your CD player and DVD player are intended for use with 12
cm (4.7 in.) CDs only.
 Extremely high temperatures can keep your CD player and
DVD player from working. On hot days, use the air
conditioning to cool the vehicle interior before you use the
players.
 Bumpy roads or other vibrations may make your CD player
and DVD player skip.

AUDIO
386
If moisture gets into your CD player and DVD player, the
players may not play even though they appear to be
working. Remove the CD from the player and wait until it
dries.
CAUTION
CD players and DVD players use an invisible laser beam
which could cause hazardous radiation exposure if
directed outside the unit. Be sure to operate the players
correctly.
CD player
 Use only CDs marked as shown above. The following
products may not be playable on your CD player.
Copy±protected CDs
CD±Rs (CD±Recordable)
CD±RWs (CD±Re±writable)
CD±ROMs
SACDs
dts±CDs

AUDIO
387
DVD player
Audio CDs
DVD video discs
DVD audio discs
Video CDs

Use only discs marked as shown above. The following
products may not be playable on your DVD player.
SACDs
Copy±protected CDs
CD±Rs (CD±Recordable)
CD±RWs (CD±Re±writable)
CD±ROMs
DVD±Rs
DVD+Rs
DVD±RWs
DVD+RWs
DVD±ROMs
DVD±RAMs

AUDIO
389
NOTICE
Do not use special shaped, transparent/translucent, lowquality or labeled CDs such as those shown in theillustrations. The use of such CDs may damage theplayer or changer, or it may be impossible to eject theCD.

AUDIO
390

Correct
Wrong
Handle CDs carefully, especially when you are inserting
them. Hold them on the edge and do not bend them. A void
getting fingerprints on them, particularly on the shiny side.
 Dirt, scratches, warping, pin holes, or other CD damage
could cause the player to skip or to repeat a section of a
track. (To see a pin hole, hold the CD up to the light.)
 Remove CDs from the CD player when you are not listening
to them. Store them in their plastic cases away from
moisture, heat, and direct sunlight.
To clean a CD: Wipe it with a soft, lint±free cloth that has been
dampened with water. Wipe in a straight line from the center
to the edge of the CD (not in circles). Dry it with another soft,
lint±free cloth. Do not use a conventional record cleaner or
anti±static device.