display Lexus GX470 2005 Pictorial Index / LEXUS 2005 GX470 (OM60B11U) Owner's Guide

AIR CONDITIONING
245
1ªAUTOº button
2ªOFFº button
3Driver side temperature display (in degreesFahrenheit or Centigrade)
4Fan speed display
5Air flow display
6Passenger side temperature display (in degreesFahrenheit or Centigrade)
7Windshield air flow button
8ªPASSENGER TEMPº (passenger side temperaturecontrol) button
9ªDUALº (temperature setting mode change) button
10ªA/Cº button
11ªMODEº(air flow control) button
12Fan speed control button
13Air intake control button
14ªTEMPº (driver side temperature control) button

AIR CONDITIONING
249
If quick heating or cooling is desired Ð
Push the ªTEMPº or ªPASSENGER TEMPº button on either
side
and hold it until ªMAX. HOTº or ªMAX. COLDº appears on
the display.
If manual fan speed control is desired Ð

1Fan speed at low2Fan speed at high
The fan speed can be set to your desired speed by pushing the
appropriate side of fan speed control button. The higher the fan
speed is, the more air is delivered. Pushing the ªOFFº button
turns off the fan.
To remove exterior windshield frost, use the high speed setting. If manual switching of air intake is desired Ð
Each time you push the air intake control button, the mode
changes in order from the RECIRCULATED AIR mode to
OUTSIDE AIR mode, then back to the RECIRCULATED AIR
mode. Each indicator light shows which mode is now selected.
1RECIRCULATED AIR mode Ð
If quick circulation of
cooled air is desired, select this mode.
2OUTSIDE AIR mode Ð The system will take fresh
outside air into the vehicle.
To prevent fogging up of the windshield, the air intake mode
may change automatically to the OUTSIDE AIR mode
depending on the condition of the air conditioning system.
For example, when the ambient temperature is low, the air
intake mode may change automatically to the OUTSIDE AIR
mode. This is not a malfunction.

AUDIO
264
AUDIO SYSTEM
Quick reference for your audio system
22PY155

You can adjust the brightness of the display. See ªInstrument panel light controlº on page 86 for details.If a Mark Levinson brand audio system is installed, the ªMark Levinso\
nº logo is shown on the panel.

AUDIO
265
1Ejecting a CD
(See page 281 for details.)
2CD slot
(See page 279 for details.)
3Display of functions in TAPE or CD mode
RPT: Automatic repeat
(See page 277 or 283 for details.)
:DOLBY NR
(See page 276 for details.)
Side change
(See page 277 for details.)
 : Rewinding or reversing
(See page 277 or 283 for details.)


: Fast forwarding
(See page 277 or 283 for details.)
RAND: Random access
(See page 284 for details.)
:CD selection
(See page 282 for details.)
4Station selector and function buttons
(See page 273 for details.)
5Radio mode: Scan tuning
(See page 274 for details.)
CD mode: Scan selection
(See page 282 for details.)
6Radio mode:Radio text message
(See page 275 for details.)
CD mode: CD text
(See page 284 for details.)
7CD load button
(See page 279 for details.)
8AUDIO´TUNE knob
(See page 268 for details.)
9Traffic announcement button
(See page 275 for details.)
10Program type button
(See page 274 for details.)
11Mode selectors
(See page 267 for details.)
12Radio mode:Seek tuning
(See page 273 for details.)
TAPE mode: Direct access to a desired program
(See page 278 for details.)
CD mode: Direct access to a desired program
(See page 283 for details.)
13Cassette tape slot
(See page 276 for details.)
14Stopping and ejecting a cassette tape
(See page 276 for details.)
15Turning the system on and adjusting the volume
(See page 267 for details.)


:

AUDIO
267
(a) Turning the system on and off
Push this knob to turn the audio system on and off. Turn
this knob to adjust the volume.
The system turns on in the last mode used.
Push
the ªAMº, ªFMº, ªTAPEº or ªDISCº button to turn on
that mode. The selected mode turns on directly.
Push these buttons if you want to switch from one mode to
another.
If the tape or CD is not set, the cassette player or CD player
does not turn on.
You can turn off each player by ejecting the cassette tape or
CD. If the audio system was previously off, then the entire
audio system will be turned off when you eject the cassette
tape or CD. If the other function was previously playing, it will
come on again.
Vehicles with rear seat entertainment system Ð
The ªDISCº button may also be used to operate a DVD player.
Pressing the ªDISCº button changes between the CD player
and DVD player. When the DVD player is in operation, ªAUXº
appears on the display.

AUDIO
268
In the ªTAPEº or ªCDº mode, the applicable functions are
shown in the lowest part of the display. Push the switch
just below to turn on each function.
(b) Tone and balance
How good an audio program sounds to you is largely
determined by the mix of the treble, mid±range, and bass
levels. In fact, different kinds of music and vocal programs
usually sound better with different mixes of treble, mid±range
and bass.
A good balance of the left and right stereo channels and of the
front and rear sound levels is also important.
Keep in mind that if you are listening to a stereo recording or
broadcast, changing the right/left balance will increase the
volume of one group of sounds while decreasing the volume
of another.Each time you push the ªAUDIO´TUNEº knob, the display
changes as in the following. To adjust the tone and
balance or turn on or off the automatic sound levelizer,
turn the knob.
BAS: Adjusts low±pitched tones.
MID: Adjusts mid±pitched tones.
TRE: Adjusts high±pitched tones.
FAD: Adjusts the sound balance between the front and rear
speakers.
BAL: Adjusts the sound balance between the right and left
speakers.
ASL: Turns on or off the automatic sound levelizer.

AUDIO
269
Automatic sound levelizer (ASL):
When the audio sound
becomes dif ficult to be heard due to road noise, wind noise, etc.
during driving, the system adjusts to the optimum volume and
tone quality according to the noise level. While the automatic
sound levelizer is on, ªASLº appears on the display. (c) Your radio antennas
The wire antenna is mounted inside the quarter windows.
NOTICE
When cleaning the inside of the quarter windows, be
careful not to scratch or damage the wire antennas or
connectors.
Putting a window tint (especially, conductive or metallic type) on the quarter windows may affect thereception of radio or mobile telephone. For theinstallation of the window tint, consult with yourLexus dealer.

AUDIO
271
(e) Your CD player with changer
Your CD player with changer can store up to 6 CDs and play
selected
CDs or continuously play all the CDs set in the player.
When you set CDs into the player, make sure their labels face
up. If not, the player will display ªERROR 1º and the CD
number.
NOTICE
Do not stack up two CDs for insertion, or it will cause damage to the CD changer. Insert only one CD intoslot at a time.
Never try to disassemble or oil any part of the CDplayer. Do not insert anything other than CD into theslot.
The player is intended for use with 12 cm (4.7 in.) CDs only.Radio operation
(a) Listening to the radio

AUDIO
272
Push these buttons to choose either an AM or FM station.
ªAMº, ªFM1º, ªFM2º or ªFM TYPEº appears on the d\
isplay.Turn this knob to the right to step up the frequency or to
the left to step down.
Your radio automatically changes to stereo reception when a
stereo broadcast is received. ªSTº appears on the display. If
the signal becomes weak, the radio reduces the amount of
channel separation to prevent the weak signal from creating
noise. If the signal becomes extremely weak, the radio
switches from stereo to mono reception. In this case, ªSTº
disappears from the display.

AUDIO
273
(b) Presetting a station
1. Tune in the desired station.
2. Push one of the station selector buttons (1 Ð 6) and
hold it until a beep is heard. This sets the station to the
button and the button number (1 Ð 6) appears on the
display.
Each
button can store one AM station and two FM stations. To
change the preset station to a different one, follow the same
procedure.
The preset station memory is cancelled when the power
source is interrupted by battery disconnection or a blown fuse. (c) Selecting a station
Tune in the desired station using one of the following methods.
Seek tuning: Push the ªSEEKº button. The radio will begin
seeking up or down for a station of the nearest frequency and
will stop on reception. Each time you push the button, the
stations will be searched automatically one after another.
Preset tuning:
Push the button (1 Ð 6) for the station you
want. The button number (1 Ð 6) and station frequency
appear on the display.
Manual tuning: Turn the ªAUDIO´TUNEº knob. The radio will
step up or down to another frequency.