Lexus HS250h 2012 Owner's Manual

590
6-2. Customization
HS250h_U_75050U
Illumination
(
→P. 3 74 )
Outer foot lights
activate on
approach of per-
son carrying
smart key
OnOff———O
Outer foot lights
operation when
the doors are
unlocked
OnOff———O
Remote touch
lightOnOff———O
Meter
(→ P. 1 6 9 )
Sensitivity of the
ambient light
sensor used for
dimming the
meter lights etc.
Standard-2 to 2O——O
Sensitivity of the
ambient light
sensor used for
brightening the
meter lights etc.
Standard-2 to 2O——O
Automatic
air condi-
tioning sys-
tem
(→ P. 266)
Switching
between outside
air and recircu-
lated air mode
linked to
“A U T O ” s w i t c h
operation
AutoManualO——O
ItemFunctionDefault
settingCustom-
ized
setting

591
6-2. Customization
6
Vehicle specifications
HS250h_U_75050U
Automatic
air condi-
tioning sys-
tem
(→ P. 2 6 6 )A/C Auto switch
operationAutoManualO——O
Tu r n i n g o n t h e
windshield
defogger acti-
vates the A/C
OnOff———O
Eco drive
mode
(
→P. 1 6 2 )
Heating/cooling
operation mini-
mized in Eco
drive mode
OnOff———O
Front seats
(
→P. 6 8 )
Driver’s seat
movement when
exiting the vehi-
cle (on some
models)
Pa r t i a l
Off
O—OO
Full
Eco Driving
Indicator
Light
(
→P. 1 7 7 )
Activating Eco
Driving Indica-
tor Light
OnOff—OOO
Po w e r w i n -
dows
(
→P. 9 0 )
Mechanical key
linked operationOffOn———O
Wireless remote
control linked
operation
Off
On
(Open only)
———O
Buzzer sounds if
operated using
wireless remote
OnOff———O
ItemFunctionDefault settingCustom-
ized
setting

592
6-2. Customization
HS250h_U_75050U
Moon roof
(
→P. 9 3 )
Mechanical key
linked opera-
tion*
OnOff———O
Linked operation
of components
when door key is
used
Slide onlyTilt only———O
Wireless remote
control linked
operation*On
(Open only)
Off———O
Linked operation
of components
when wireless
remote control
used
Slide onlyTilt only———O
Rear sun-
shade
(→ P. 3 9 2 )
Ti m e e l a p s e d
before the
reverse opera-
tion feature acti-
vates
0.7 sec-
onds
Off———O
0 seconds———O
0.9 sec-onds———O
1.2 sec-onds———O
Reverse opera-
tionOnOff———O
*: This function cannot be customized unless power window operation using the wireless remote control or mechanical key is enabled.
ItemFunctionDefault settingCustom-
ized
setting

593
6-2. Customization
6
Vehicle specifications
HS250h_U_75050U
Driving
position
memory
(Driver’s
seat)
(→ P. 7 2 )Called up when
door is opened
with smart
access system
with push-but-
ton start
Driver’s
doorAll doors———O
Intuitive
parking
assist ∗
Signal (buzzer)
when the dis-
tance to obsta-
cles does not
change for 3
seconds or more
OnOff———O
Signal (buzzer)
when the shift
position is
changed to N
OnOff———O
Active sensors
when the shift
position is out of
P or R
Front
corners
Rear
centers, Rear
corners
———O
Seat belt
reminder
(
→P. 5 0 5 )
Vehicle speed
linked seat belt
reminder buzzer
OnOff———O
Reverse
buzzer
( → P. 1 6 3 )Signal (buzzer)
when the shift
position is in RIntermit-
tentSingle———O
∗ : Refer to "Navigation System Owner's Manual"
ItemFunctionDefault
settingCustom-
ized
setting

594
6-2. Customization
HS250h_U_75050U
Multi-information display (→P. 177)
Settings that can be changed using the multi-information switches
Av a i l a b l e u n i t smiles (MPG), km (km/l), km (l/100 km)
Available languagesEnglish, French and Spanish
■Vehicle customization
●When the “Speed-detecting automatic door lock function” and “Selecting other
than P position locks all doors” are both on, the door lock operates as follows.
• When any one of the shift position indicators other than P is illuminated, all the doors will be locked.
• If the vehicle is started with all the doors locked, the “Speed-detecting auto- matic door lock function” would not operate.
• If the vehicle is started with any door unlocked, the “Speed-detecting auto- matic door lock function” will operate.
●When the smart access system with push-button start is off, the “Smart door
unlocking function” cannot be customized.
●When the doors remain closed after unlocking the doors and the “Automatic
door lock function” activates, the signals will be generated in accordance with
the “Operation signal (emergency flashers)” and the “Operation signal (buzzer
volume)” settings.
■In the following situations, customize mode in which the settings can be changed
through the multi-information switches will automatically be turned off.
●A warning message appears after the customize mode screen is displayed.
●The “POWER” switch is turned off.
●The vehicle begins to move while the customize mode screen is displayed.

595
6-2. Customization
6
Vehicle specifications
HS250h_U_75050U
CAUTION
■Cautions during customization
As the hybrid system needs to be running during customization, ensure that the
vehicle is parked in a place with adequate ventilation. In a closed area such as a
garage, exhaust gases including harmful carbon monoxide (CO) may collect and
enter the vehicle. This may lead to death or a serious health hazard.
NOTICE
■During customization
To prevent 12-volt battery discharge, ensure that the hybrid system is running while
customizing features.

596
HS250h_U_75050U
6-3. Initialization
Items to initialize
ItemWhen to initializeReference
Maintenance dataAfter the maintenance is performedP. 4 2 4
Tire pressure warning
system
• When rotating the tires on vehicles with differing front and rear tire infla-
tion pressures
•When changing the tire size
P. 4 5 2
The following items must be initialized for normal system operation after
such cases as the 12-volt battery being reconnected, or maintenance
being performed on the vehicle.

For owners7
597
HS250h_U_75050U
Reporting safety defects for U.S. owners..................... 598
Seat belt instructions for Canadian owners
(in French)
.............................. 599
SRS airbag instructions for Canadian owners
(in French) .............................. 601

598
HS250h_U_75050U
Reporting safety defects for U.S. owners
If you believe that your vehicle has a defect which could cause a crash
or could cause injury or death, you should immediately inform the
National Highway Traffic Safety Administration (NHTSA) in addition
to notifying the Lexus Division of Toyota Motor Sales, U.S.A., Inc. (Toll-
free: 1-800-25-LEXUS).
If NHTSA receives similar complaints, it may open an investigation,
and if it finds that a safety defect exists in a group of vehicles, it may
order a recall and remedy campaign. However, NHTSA cannot
become involved in individual problems between you, your dealer, or
the Lexus Division of Toyota Motor Sales, U.S.A., Inc.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at
1-888-327-4236 (TTY: 1-800-424-9153); go to
http://
www.safercar.gov
; or write to: Administrator, NHTSA, 1200 New
Jersey Ave, S.E., Washington, DC 20590. You can also obtain other
information about motor vehicle safety from
http://www.safercar.gov.

599
7
HS250h_U_75050U
For owners
Seat belt instructions for Canadian owners (in French)
The following is a French explanation of seat belt instructions extracted
from the seat belt section in this manual.
See the seat belt section for more detailed seat belt instructions in
English.