mirror Lexus IS200d 2011 s User Guide

IS250/220d/200d_EE
23
Navigation
system
*2
Without navigation system
Clock

P. 364
Audio
system

P. 266
Air condition-
ing system
P. 254Rear window and
outside rear view
mirror defoggers
switch
P. 264Security indica-
tor
P. 96, 102
Emergency flasher
switch
P. 458
Clock P. 364
Audio
system
*2
Security indicator
P. 96, 102
Emergency flasher
switch
P. 458
Air conditioning
system
*2
With navigation system
: If equipped
*1: For vehicles with a navigation system, refer to the “Navigation System Owner’s
Manual”.
Rear window and out-
side rear view mirror
defoggers switch
*2
A

1Before driving
31
1-1. Key information
Keys ................................... 32
1-2. Opening, closing and
locking the doors and
trunk
Smart entry & start system. 37
Wireless remote control ..... 52
Doors .................................. 54
Trunk .................................. 59
1-3. Adjustable components (seats,
mirrors,
steering wheel)
Front seats .......................... 63
Driving position memory ... 65
Head restraints ................... 69
Seat belts ............................ 72
Steering wheel (manually
adjustable type) ................ 77
Steering wheel
(power-adjustable type) ... 78
Anti-glare inside rear
view mirror ...................... 80
Outside rear view mirrors .. 821-4. Opening and closing
the windows and
moon roof
Power windows.................. 85
Moon roof .......................... 88
1-5. Refueling
Opening the fuel tank cap .. 92
1-6. Theft deterrent system
Engine immobilizer system 96
Double locking system .... 101
Alarm ............................... 102
1-7. Safety information
Correct driving posture .... 108
SRS airbags....................... 110
Child restraint systems..... 121
Installing child restraints . 129
Airbag manual on/off
system ............................ 139

63
1
Before driving
IS250/220d/200d_EE
1-3. Adjustable components (seats, mirrors, steering wheel)
Front seats
Manual seat
Seat position lever
Seatback angle lever
Vertical height adjustment lever
Seat cushion (front) angle knob

64
1-3. Adjustable components (seats, mirrors, steering wheel)
IS250/220d/200d_EE
Power seat
Seat position switch
Seatback angle switch
Seat cushion (front) angle switch
Vertical height adjustment switch
Lumbar support switch

65
1
1-3. Adjustable components (seats, mirrors, steering wheel)
Before driving
IS250/220d/200d_EE
CAUTION
Seat adjustment
Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt.
If the seat is too reclined, the lap belt may slide past the hips and apply
restraint forces directly to the abdomen or your neck may contact the
shoulder belt, increasing the risk of death or serious injury in the event of
an accident.
Manual seat only: After adjusting the seat, make sure that the seat is
locked in position.

66
1-3. Adjustable components (seats, mirrors, steering wheel)
IS250/220d/200d_EE
Driving position memory (driver’s seat)

67
1-3. Adjustable components (seats, mirrors, steering wheel)
1
Before driving
IS250/220d/200d_EE
Your preferred driving position (the position of the driver's seat, steer-
ing wheel and outside rear view mirrors) can be memorized and
recalled with the touch of a button. It is also possible to set this func-
tion to activate automatically when the doors are unlocked.
Three different driving positions can be entered into memory.
Entering a position to memory
Switch to IGNITION ON mode.
Adjust the driver’s seat, steering wheel, and outside rear
view mirrors to the desired positions.
Push the “SET” button, then
within 3 seconds push button
“1”, “2” or “3” until the sig-
nal beeps.
If the selected button has
already been preset, the pre-
viously recorded position
will be overwritten.
Recalling the memorized position
Vehicles with an automatic transmission: Check that the shift
lever is set in P.
Vehicles with a manual transmission: Check that the parking
brake is set.
Switch to IGNITION ON mode.
Push button “1”, “2” or “3”
to recall the memorized posi-
tion.
STEP1
STEP2
STEP3
STEP1
STEP2
: If equipped

68
1-3. Adjustable components (seats, mirrors, steering wheel)
IS250/220d/200d_EE
Linking driving position memory with door unlock operation
Record your driving position to button “1”, “2” or “3” before per-
forming the following.
Carry only the key (including the card key
) to which you want to
link the driving position. If 2 or more keys are in the vehicle, the
driving position cannot be linked properly.

: If equipped
Using the wireless remote control
Turn the “ENGINE START STOP” switch OFF and close
the driver's door.
Press and hold the desired but-
ton (“1”, “2” or “3”) while
pressing on the wireless
remote control until the signal
beeps.
The driving position is recalled
when the driver's door is
unlocked using the entry func-
tion or wireless remote control
and the driver's door is opened.
To prevent unintended triggering of the alarm, open and close a
door once after a driving position has been recorded. (If a door is
not opened within 30 seconds after is pressed, the doors will be
locked again and the alarm will automatically be set.)
In case that the alarm is triggered, immediately stop the alarm.
(P. 102)
STEP1
STEP2

69
1
1-3. Adjustable components (seats, mirrors, steering wheel)
Before driving
IS250/220d/200d_EEUsing the door lock switch
Turn the “ENGINE START STOP” switch OFF and close
the driver's door.
While pressing the desired but-
ton (“1”, “2” or “3”), press the
lock or unlock side on the
driver’s door lock switch until
the signal beeps.
The driving position is recalled
when the driver's door is
unlocked using the entry func-
tion or wireless remote control
and the driver's door is opened.
STEP1
STEP2

70
1-3. Adjustable components (seats, mirrors, steering wheel)
IS250/220d/200d_EE
Canceling the linked door unlock operation
Turn the “ENGINE START STOP” switch OFF and close the
driver's door.
Using the wireless remote control: While pushing the “SET” but-
ton, press on the wireless remote control until the signal
beeps.
Using the door lock switch: While pressing the “SET” button, press
the lock or unlock side on the door lock switch until the signal
beeps.
Operating the driving position memory after turning the “ENGINE START
STOP” switch OFF
Memorized positions (except for the steering wheel position) can be acti-
vated up to 180 seconds after the driver’s door is opened and another 60 sec-
onds after it is closed again, even after turning the “ENGINE START
STOP” switch OFF.
To cancel seat position recall
Perform any of the following operations.
Push the “SET” button.
Push button “1”, “2” or “3”.
Adjust the seat using the switches (only cancels seat position recall).
If the battery is disconnected
The memorized positions are erased when the battery is disconnected.
CAUTION
Seat adjustment caution
Take care during seat adjustment that the seat does not strike the rear pas-
senger or squeeze your body against the steering wheel.
STEP1
STEP2